Used Napkin Folder for sale (677)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Straight line Crash lock 4 points glue 6 points glue Max speed 400 meter per minute Till 800 gsm carton , N, F and E Dcjdpfxoym A Hxo Aiisp Max format 1100 x 800 mm Min format 126 x 60 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 170, type of input current: AC, total width: 1,300 mm, total length: 12,278 mm, total height: 1,133 mm, input voltage: 400 V, compressed air connection: 8 bar, power of the servo motor: 25,000 W, overall weight: 7,000 kg, Equipment: CE marking, PAKTEK GM1050 + cold glue system in very good condition, available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in relatively low usage and a well-preserved overall condition. Djdpfx Ajz Hk Tvsiijcp The PAKTEK GM1050 is currently in very good working condition and is ready for continued production. Regular maintenance and careful operation have ensured that the machine remains reliable and suitable for professional production. Machine highlights: Manufacturer: PAKTEK Model: GM1050 Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment A good opportunity to acquire a well-maintained PAKTEK GM1050 with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder Dcsdpszlqwzefx Aiisp - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: excellent (used), Year of construction: 2023, Offer for Technofold 1100 SL with Gyro Specification: Machine speed: 350 m/min Step speed: 20 m/min Packaging width: 160-1100 mm Machine dimensions: 22 × 1.88 × 1.5 m Machine weight: 9.2 t Max power consumption: 26 kW Air demand: 6 bar / max 10 m³/h Machine equipment: 4-6 point machine Dodpfxsw Ec D Ao Aiijcp Gyro – rotating packages by 90° Side alignment section – left/right Pre-breaking section Automatic bottom section Servomotors, 4/6-point rear folding system Lower circular gluer left/right KQ cold glue system with 4 guns Final pressing and closing section Delivery section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block – SPANKER Vacuum on the feeder + vibrator Camera with monitor on display

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 04058-00, control type: CNC control, actuation type: hydraulic, controller model: CNC 5000, working width: 1,250 mm, operating speed: 250 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 25 A, type of input current: three-phase, Equipment: CE marking, emergency stop, ORNS Twin-Pro 150 G – Year of manufacture 2015 – Ready for immediate use For sale is a well-maintained JORNS Twin-Pro 150 G from the year 2015. The machine is in good technical and visual condition and is fully functional. The system is ideally suited for the economical production of roof and facade profiles as well as sophisticated edge profiles. Technical data: Manufacturer: JORNS Type: Twin-Pro-150G-RH-UV-SLE-1150-CP100-6.4-mp Year of manufacture: 2015 Serial number: K14044 Control: CP100 Working depth: 1,150 mm Usable length: 6,400 mm Steel: up to 1.5 mm Aluminum: up to 2.5 mm Special features: Djdpfszmfibsx Aiiscp Good condition Available immediately Ideal for sheet metal workers, roofers, and facade companies The machine can be inspected by appointment. We look forward to your inquiry for further information.

Condition: excellent (used), Schechtl MAE 400 CNC in very good condition, with electric depth stop. Dcjdpfjz Drv Hex Aiisp Price is negotiable. We ship worldwide. If you have any questions, please call us at:

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, ERBEND D-SFA 4230 – CNC Folding Machine The ERBEND D-SFA 4230 is a powerful double-sided CNC folding machine for accurate and flexible sheet metal processing. This machine is offered on behalf of a customer and has less than 10 operating hours. It is in nearly new condition, fully functional and immediately available. The machine can be viewed under power and tested by appointment. Main Features 4,200 mm bending length Double-sided folding: upwards and downwards ERFOLD 3D CNC control 2D/3D programming and simulation Motorized CNC axes U-shaped back gauge Pneumatic back gauge fingers Integrated vacuum cups for sheet positioning Segmented upper and lower tooling Pneumatic tool clamping CE certified Technical Specifications Model: ERBEND D-SFA 4230 Bending length: 4,200 mm Steel S235: max. 2.25 mm Stainless steel: max. 2.0 mm Aluminium: max. 3.0 mm Control: ERFOLD 3D CNC CNC axes: A, B and D axis Upper tool: 200 mm Crowning: Manual Machine weight: approx. 11,800 kg Dcsdpfxezwqwxe Aiijp Double-Sided Folding The D-SFA technology allows the machine to fold both upwards and downwards, significantly reducing the need to turn or reposition the workpiece. Combined with the CNC-controlled back gauge, vacuum sheet positioning and ERFOLD 3D programming, this makes the machine particularly suitable for efficient production of large and complex sheet metal parts. Condition & Availability Less than 10 operating hours Nearly new condition Fully functional Immediately available Inspection and testing under power possible An excellent opportunity to acquire a nearly new ERBEND D-SFA 4230 without the delivery time of a new machine. Contact us for further information, pricing or to arrange a demonstration.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, JORNS NORMA - LINE 125 SW | Swivel bending machine | 6.4 meters working length, 1.25 mm bending capacity. Dcjdpfjznc Ahsx Aiiop

Condition: good (used), FS Frank Dodpsz I Txwefx Aiijcp Schäffler Used Machines You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Device features: Press brake Schechtl HA The beam bends cleanly – a test is possible. Degree indicator Bending length approximately 310 cm Sheet metal thickness up to 1.5 mm (steel, aluminum, zinc, etc.) Standard beam Foot closer Sheet metal support Optionally, a roller shear with a beam can be added; this would have to be ordered new from the factory. Price list from 2024 – net price – prices are now significantly higher. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various beams, depth stops, and everything else related to sheet metal and steel processing, including press brakes, plate shears, drilling machines, and round machines, as well as slitting and profiling machines – accessories (beading device, round rolls for gutter production, back gauge, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice with VAT shown. Free loading is possible – weight approximately 2000 kg. Inspection and testing are possible and desirable after scheduling an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 highways. Article number: Press brake HA 310

Condition: like new (used), Year of construction: 2005, functionality: fully functional, FOLDER STAHL TI 40/43 COMBI Year 2005/2002 Dsdpfx Aijy R Sv Seiocp Condition: as new

Condition: used, Year of construction: 2001, 3 MONTHS WARRANTY offer consist of: - cross folder Horizon AFC-504 AKT - flat pile feeder - delivery connector Horizon AFC-504 AKT 4-buckles cross folder - roller condition: 0% - technology: touch & work - error avoidance: misfeed-,doublefeed- and jamming control - memory folding types: 11 standard-types of folding preprogrammed Dcjdpju Sr Ehjfx Aiijp - saveable jobs: 50 memories for repeat orders - knife: full automatic - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - sheet size: max. 490x650mm; min. 120x172mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 27.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.540x1.790x1.440mm - weight: 870kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: ready for operation (used), You are bidding on a press brake from the well-known German manufacturer, Biegemaster. Dcodpszcw Ucjfx Aiijp Features of the machine: Bending length: slightly over 4m Sheet metal thickness (steel): 2mm Adjustable bending angle (see picture) Emergency stop Sheet metal support Control panel operation An advantage of this design is that sheets that have already been bent can also be bent again on the side. Free loading is possible. For approximately €2,000, I can arrange for a slitting shear to be included. You will receive an invoice in accordance with §25 a UStG. I can arrange transport with a shipping company if desired. Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Payment in cash upon collection. If there is anything else I can do for you, please call me briefly. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the highway) Article number

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: Djdovaatfepfx Aiiecp - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: good (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 3170, control type: manual, actuation type: electric, working width: 3,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, Only aluminum sheets, predominantly with a thickness of 2 mm, were used. The machine was used infrequently. Dcjdpfx Aozk Ihnsiiop

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Dcjdezmy Eqepfx Aiiop Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Dcjdpfjw T Sc Aex Aiiep Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: good (used), functionality: fully functional, Year of construction: 2007, Motorized Swivel Bending Machine Djdpfj Agnrvex Aiijcp Manufacturer: CIDAN, Type: KMP 20 Year of Manufacture: 2007 Technical Data Manufacturer: CIDAN Type: KMP 20 Year of Manufacture: 2007 Usable Length: 2050 mm Capacity: 3.0 mm Upper Die Stroke: 100 mm Dimensions: approx. L 3.05 x W 2.20 x H 1.70 m Weight: approx. 2.25 t Equipment • Controlled back gauge 1000 mm • Touch screen control • Point rail 30° • Bending rail 20 mm • Foot pedal and emergency stop All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Dcsdpfx Aisy Sv Syoijp

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Dsdpfx Aijzzxb Hsiocp Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm Dcedezc Hpijpfx Aiiop CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 47800, Offer 26308 Technical specifications: - Maximum working width: 3040 mm - Maximum material thickness at 40 kp/mm² tensile strength: 2 mm - Electronic adjustment of bending angle: 0 - 180° - Automatic sequential control for a complete working process - Maximum upper die setting: 250 mm - Maximum opening width/stroke of the upper die: 350 mm - Height adjustment: - Upper die: 30 mm - Lower die: 90 mm Dcodpfez Ndu Ssx Aiisp - Upper die drive: 400 V / 1.5 kW - Lower die drive: 400 V / 4.0 kW - Space requirement: approx. W 4450 x H 1650 x D 2100 mm - Weight: approx. 3900 kg - Includes: - Point rail + lower die rail - E-foot switch

Condition: new, Year of construction: 2026, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, overall weight: 540 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE Dodpfsci R Exjx Aiiscp - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: used, Year of construction: 2022, Technical specifications for the TZ 150 – 6.4 m S-Line model Usable working length: 6400 mm Insertion depth: 1250 mm Maximum upper die opening: 220 mm Maximum bending capacity: 1.50 mm steel sheet (400 N/mm²) Bending angle / precision: max. 143° / ± 0.5° Bending speed: from 0° to 140° in 2.0 s from 140° to 0° in 1.9 s Depth gauge stroke: 5–1250 mm (5 + 1 stop unit) Depth gauge – tolerance range: ± 0.1 mm per series Dcedpfx Aisz Epd Rjisp Electrical supply / protection: 400 V / 50 Hz, 20 A / 4.0 kW pump motor External dimensions / weight: L 7800 × W 2110 × H 1800 mm / approx. 5500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FX32 PLUS with a pivoting beam, featuring both fixed and segmented tooling. The Plus model, with its adjustable bending center, maintains a consistent distance to the radius rail throughout the entire bending process. The result is a perfect radius, without causing material stress, regardless of thickness, ensuring a flawless finish and virtually unmatched accuracy in angles and measurements. Technical specifications: Year of manufacture: 2024 Control: CNC with nuLink Mechanical bending compensation adjustment (Crowning system) Dcjdpfx Aiezc Hvisisp Working length: 3200 mm Max. bending thickness: 2 mm Bending beam tooling: 7/10 and 20 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) Quick-change segmented tooling High accuracy and repeatability Application: These machines are designed for bending, forming, and profiling sheet metal. They are ideally suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. If you have any further questions, we will be happy to answer them.

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced RAS UpDownBend 78.40 cnc Folding System for sale 4metre up and down cnc folding machine with U shape back gauge as highlighted per photograph Year 2016 Technical Data: Material Thickness max. (Mild Steel) 3.0mm Material Thickness max. (Stainless Steel) 2.0mm Material Thickness max. (Aluminium) 4.0mm Working Length 4060mm / 4metre Gauging Depth ("U" shape) 95-3270 (4150)mm Stop Finger Units (fix - telescope - fix) 2 + 10 + 2 Gauging System Accuracy -/+ 0.1mm Open Height Upper Beam max. 600mm Telescopic Gauging System (Travel Range) 640 – 1520mm Dcjdsnnz Apopfx Aiijp Pivot Point Adjustment +/- 15mm Folding Beam Height Adjustment 150mm Folding Beam Travel Range 180 deg Working Height 1000mm Speeds: Upper Beam 75mm/s Folding Beam 110 deg/s Gauging System from min to max 2.2s