Used Multitech 800 for sale (8,040)

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dimension workbench approx. 2.940 x 800 x 985 mm (W x D x H) Dimension shelf approx. 1,730 x 320 x 985 mm (W x D x H) Cgjdohy Nl Iopfx Airou Included in delivery are: 03 x shelf upright S-1, completely galvanized total height 1.972 mm Depth up to height 985 mm: 800 mm Depth from height 985 mm: 320 mm 02x Shelf upright S-1, completely galvanized total height: 985 mm Depth: 800 mm 10 x plastic cover caps 10 x steel feet 33 x shelf beams, S - 2, 1.650mm clear width 10 x shelf beams, S - 1, 600mm clear width 28 x shelves, H 25, 300 x 800 mm 04 x shelves, H 25, 150 x 800 mm 06 x shelves, H 12, 600 x 320 mm 03 x shelves, H 12, 450 x 320 mm 14x open fronted storage boxes, new, dim. approx. 350 x 210 x 150 mm, blue 15x open fronted storage boxes, new, dim. approx. 500 x 315 x 200 mm, blue Remark: The trash can is not included in the offer! Our services at a glance: (Prices on request) assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), This sturdy workbench is perfect for DIYers and professionals who need a stable work surface with storage space. The work surface is made of 38 mm chipboard with a high quality canted flat sheet laid on top, providing a solid foundation for any type of project. Underneath the work surface is a shelf with 12 drawers (6 drawers per side), providing plenty of storage space for tools, materials and accessories. Included in delivery are: 01x workbench, used/ new System: SSI Schaefer Type: PR 600 Dimension: approx. W 2.900 x D 800 x H 940 mm consisting of each: 02x workbench stand, II. choice (new goods) material color: sendzimir galvanized stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, new Material color: blue box profile: 110 x 40 mm clear width: 2.700 mm 04x safety pins, used execution: completely galvanized 01x chipboard, used dimension: 2.900 x 800 x 38 mm if necessary in two parts 08x drilling screws, new finish: galvanized Dimensions: 6.3 x 70 mm 01x steel cover, new Material color: sendzimir galvanized Dimension: 2.900 x 800 x 40 x 1 mm 01x shelf rack, II. choice - incl. pull-outs - System: SSI Schaefer Type: R 3000 consisting of each: 12x ESCH 9420 incl. pull-outs, II. choice 12x side panel SBL-ESCH 4200, pair, I. choice 06x frame 400 x 735 mm, II. choice 06x frame connector RV 3006, I. choice 08x Longitudinal bracing LV 3133, I. choice 08x intermediate shelf ZB 9415 V, I. choice Csdpfx Aijmrqk Rersgu Note: The workbench is delivered in an unassembled condition. The shelf rack is already pre-assembled upon delivery.

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. Cgsdpehvmmpjfx Airsu

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm Csdpfx Aiehvmm Norogu stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 04x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: excellent (used), The scope of delivery includes: Cedoi Ewqropfx Airsgu 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: new, functionality: unexamined, This concerns a batch of electronic goods from Logitech, Microsoft, Razer, Steelseries, Corsair, Xbox, Astro Gaming, HyperX and Roccat. Cgodpfx Aioulgk Dsrsu The batch consists of approximately 800 products. Consisting of 5 pallets. The retail value is over: €150,000,-. OUR PRICE NOW: €28,000,- FCA WAREHOUSE IN POLAND This concerns a consignment of returned goods from a large online retailer.

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Cgsdpoh S Upisfx Airou Sharpening bar 800 used 1987 Rating: Table Model: 800 Description: 800 grinders with a slat knife

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Codpfxscw Dg Dj Airogu Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg Cgsdpfxexxu U De Aireu

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 173180025, empty load weight: 975 kg, working height: 50 mm, working width: 3,000 mm, working length: 3,000 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 3,000 mm Working area, Z-axis: 50 mm Cgsdey Tu Uispfx Airsu Horizontal drilling spindles: 4 MACHINE DETAILS Power of main motor: 3 kW Voltage: 400 V Current consumption: 3 A Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,800 x 1,800 mm Net weight: 975 kg Transport packages: 1 EQUIPMENT CE marking Horizontal drilling machine Vertical drilling machine Saw unit included

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 130 mm, ejector force: 139,000 N, opening stroke: 1,030 mm, plate width: 1,500 mm, plate height: 1,620 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Plate size (h x v): 1,620 x 1,500 mm Clear width between tie bars (h x v): 1,120 x 1,000 mm Mold height: 500 - 1,050 mm Maximum plate distance: 2,080 mm Opening stroke: 1,030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7,200 kg Injection system Screw diameter: 130 mm Displacement: 7,300 cm³ Injection weight (PS): 6,640 g Injection pressure: 1,300 bar Cjdjy T Hz Iopfx Airegu Screw length: 20 l/d Electrical and hydraulic equipment Rated power of pump motor: 110 kW Heating power: 79 kW Oil tank capacity: 1,300 L MACHINE DETAILS Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33,500 / 9,700 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, injection pressure: 1,795 bar, ejector stroke: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Injection force: 8,000 kN Distance between columns (h x v): 1,120 mm x 1,000 mm Maximum mold opening distance: 1,400 mm Minimum/maximum tool mounting height: 600 mm / 1,100 mm Opening stroke of the clamping plate: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 kN (rearward: 59 kN) Injection Unit Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Injection volume: 3,367 cm³ Injection size for PS: 3,064 g Injection rate: 690 cm³/s Nozzle clamping force: 166 kN MACHINE DETAILS Codpfjy Ulhcox Airsgu Control model: MC4 Connected power of pumps: 90 kW Heating capacity: 61 kW Dimensions & Weight Machine dimensions (L x W x H): 10.4 m x 2.86 m x 2.39 m Net weight: 45 t

Condition: good (used), Universal milling machine Hermle UWF 800 Travel ranges: X-axis travel 500 mm Y-axis travel 300 mm Z-axis travel 400 mm Total power consumption 4 kW Machine weight approx. 1250 kg Cjdpfx Aiszbrqisregu Dimensions 170x130x180 cm Tool holder SK40 Vertical quill stroke 63 mm Speed range 45 – 2000 rpm Number of speeds: 12 Equipment: - 3-axis Heidenhain digital display - Coolant system - Vise (in need of repair) The machine has been technically inspected and geometrically measured. Videos can be sent upon request. Backlash X-axis 0.15 mm Backlash Y-axis 0.1 mm Backlash Z-axis 0.15 mm Various tool holders are available upon request.

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Cgsdpfezbrrtex Aireu Tool lenght measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Csdpfx Aezbqy Neirsgu Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Welding rotary table Protec KT 2000 A Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Height horizontal 1200mm Csdopdqfrspfx Airegu Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Cgjdpfx Aioy Hfm Nersu Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, Year of construction: 1986, Deckel Maho 800E, manufactured in 1986: - Table surface area: 600 x 1100 mm - Travel in x-axis: 800 mm - Travel in y-axis: 450 mm - Travel in z-axis: 500 mm - Footprint: 3000 x 2500 x 2030 mm - Weight: approx. 4000 kg Cgedpfxsza Am Ej Airou

Condition: good (used), Year of construction: 2020, functionality: fully functional, Technical details x-travel 730 mm y-travel 800 mm z-travel 560 mm Control Smooth X-Steuerung Additional information For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC MAZAK VARIAXIS i-800 5-axis machining center Year of manufacture October 2020 Commissioned in 2021 Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: ±360° Rapid traverse (X/Y/Z): 42 m/min Rapid traverse (A/C): 50 rpm Max. spindle speed: 10,000 rpm SK-50 spindle taper, DIN 69871 -Tool magazine for 120 tools -Preparation for hydraulic clamping including pallet clamping function -Automatic pallet changer -Electronic handwheel -Panel for Euchner Tool ID -Air flow through rotating spindle -Coolant gun -Knoll coolant system KF400/2300 -Paper band filter -Preparation for 70 bar -High-pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 laser -Air blow-off at the NC4 laser -Mazak Monitoring B, including Renishaw RMP600 probe -Tool breakage monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO program – macro -Automatic workpiece coolant flushing at the pallet changer -Workpiece zero point offset under EIA/ISO -Mazak API -Smoothly synchronized Thread cutting - Drilling cycle with torque-dependent chip breaking - Engraving function Maximum program size: 8 MB - Rapid traverse with constant tilt angle - Robot interface (Advance/Profibus) MAZAK VC PRIMOS 400 L Vertical machining center Year of manufacture 2020, installed 2021 Mazatrol Smooth C Travels X: 500 mm Y: 400 mm Z: 350 mm Table size: 600 x 400 mm Max. table load: 300 kg Milling spindle AC 11 kW Max. spindle speed: 12,000 rpm 14 tools, BT30 - 2 hydraulic connections - Automatic door - Oil mist lubrication - Signal light - Airflow through rotating spindle -Mazak Monitoring B, incl. Renishaw OMP40 touch probe - Synchronized thread cutting - Drilling cycle with torque-dependent chip breaking - Rapid traverse with constant tilt angle - Robot interface (Advance/Profibus) - Profibus DP CELLRO ELEVATE E-110-165 Robot cell with parts storage Elevate W 2000 mm – H 4000 mm Fanuc robot R-2000 165F iC Fanuc robot max. payload: 165 kg max. handling weight: 90 kg Automatic gripper change system Manual gripping force control I/O module gripper magazine Internal valve manifold Modem for remote maintenance Safety fence with gate and request button Cedpfx Aijzazn Iorsgu PREMIUM controls High-quality dialog control via touchscreen Including robot software options: High-sensitivity collision detection Auto singularity avoidance Soft float DCS position Speed ??Check Function Workpiece Rotary Station Workpiece Measuring Station with SPC Trays for measuring parts during the process Air Blow-Out Station Various Trays 1600 x 550 mm Loading with extendable tray. Interface for 2 Variaxis i-800s and one VCP400L For sale is a complete production cell with the capability of 6-sided machining. The production cell consists of a 5-axis Mazak Variaxis i800 machining center, a Mazak VCP400L vertical machining center integrated into a system with a CELLRO robot cell including part storage, robot, measuring station, turning station, and blow-out system.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping Cgodpfx Aozav Hroirou -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 Csdpfszav Dwjx Airegu -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Cgsdpjgqg Sgjfx Airou

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Cgedsgmi Unepfx Aireu

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Cgsdpfxjxy Tmne Airsu

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Lathe - cycle controled | Brand: FAT-HACO / Type: TUR 800 MN / Year of construction: 2001, General overhaul in 2009, Replacement in 2010 The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe. The TUR MN is a production machine for complex parts as a single piece or in small quantities with high precision. The machine can be inspected in the factory under power by appointment. Condition: Fully functional / ready for use. The general overhaul in 2009 included the following work: - Machine completely dismantled, cleaned and remounted, - Maintenance of the gear box, - Machine bed have been grinded, - Upper bed has been scraped by hands, - Measuring and adjusting the headstock - Measuring and adjusting the plan and longitudinal slide Replacement in 2010: Ball screw renewed. TECHNICAL SPECIFICATIONS: - Control: SIEMENS SINUMERIK 840D ManualTurn - Swing diameter over bed max.: 800 mm - Swing diameter over support max.: 480 mm - Distance between centers (turning length)max.: 4.000 mm - Centre height: 250 mm Codpfozamkzox Airegu Headstock: - Spindle cone (metric cone): 150 - Bore through the spindle: 140 mm - Spindle speed: 5 - 1.800 rpm - Spindle speed I: 5 -360 rpm at N = const.: 90 - 360 rpm - Spindle speed II: 360 - 1.800 rpm at N = const.: 360 - 1.800 rpm Feeds: Type of the feed drives - servo drives: - Gradient of the leading spindle (Z/X): 10 mm - Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min - Feed force of the longitudinal feed (Z) max.: 15.000 N - Feed force of the crossfeed (X) max.: 10.000 N - Adjustment range of the cross slide (X): 480 mm - Range of the bedway: 544 mm Cross slide: - Width of the cross slide: 330 mm Tailstock: - Permitted workpiece weight max.: 3 tons - Tailstock quill - morse taper: 6 MT - Diameter of the tailstock quill: 125 mm - Tailstock sleeve stroke manuell: 280 mm Drive motor feed rate for X/Z-axis: - Nominal torque Mn = 15,5 Nm - Nominal speed Nn = 3.000 rpm Total power requirement: 39,5 kW Machine weight approx.: 9,3 tons Dimensions of the machine: Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s approx. 1.400 mm shorter) Width: 2.500 mm Height: 2.200 mm SPECIFICATIONS / ACCESSORIES: - 1 steady rest, Ø: 30 - 340 mm - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -