Used Mortiser for sale (193)

Condition: used, Camam Horizontal and vertical double mortising machine. 2 double horizontal spindles 3 vertical spindles right side Itedpfx Aewt S E Ejfisn 3 vertical spindles left side

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1301, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Itsdpfx Asw I Emksfion Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Itjdpfxsw Smuke Afion *

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Ijdew I Ea Dspfx Afistn Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: new, Catalogue number: S 0335 - New machine, in stock Iodpfx Aovw Rqisfietn - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Frame dowel and slot mortising machine Double-jaw chuck for tools up to 20 mm shank diameter 1.5 kW motor Position adjustment for 2 levels, pneumatic (0-100 mm) Max. drilling depth: 150 mm Precision indexing rail with 12 mm pitch, center detent and cross adjustment 320 mm 2 pneumatic safety clamping cylinders Itjdpfxjw I Uy Tj Afisn Slot mortising device lowerable with 2 program cams Availability: short-term Location: Flörsheim

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm Itedpfoktg Dhex Afisn - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Itodpfx Afsirmyqjijn Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Condition: new, Year of construction: 2025, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Itsdpfx Aew H R Aisfion Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure Itedpfjwg Hr Tsx Afisn cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 240 mm, Hundegger K2, year 2000, for processing timber dimensions up to approx. 240 x 440 mm, equipped as follows: - 1 infeed table with cross conveyor, 8 m (workpieces up to 13 m can be handled without problem) - 1 under-table saw - 1 4-axis universal milling unit Itedpow Rb Nasfx Afion - 1 vertical combination support - 1 horizontal combination support - 1 drilling unit - 1 reinforced drilling unit - 1 mortising unit - 1 marking device - 1 turning station Various tools and spare parts are included. The machine has been regularly maintained by Hundegger. Disassembly is to be carried out by the buyer or by Hundegger (not included in the price). In the attached PDF layout, the relevant section of the machine is outlined in red. The planing system visible in the photos, including planer, cross conveyor, and storage, is not for sale. The machine will be in operation until approx. 12/2025 and can be inspected by appointment.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 90450080, feed length Z-axis: 1,550 mm, workpiece weight (max.): 12,500 kg, cutting height (max.): 400 mm, feed rate Y-axis: 2,700 m/min, total length: 27,500 mm, total height: 4,500 mm, cutting width (max.): 800 mm, saw blade diameter: 520 mm, overall weight: 12,500 kg, power: 40 kW (54.38 HP), working length: 12,000 mm, working width: 800 mm, type of input current: three-phase, 5-Axis CNC Timber Frame Machining Center ESSETRE Techno One 1TG–5A 5-axis timber processing center (X Y Z B C) with fixed gantry Designed for the machining of all roof elements: straight and angled dovetail joints, tenon and mortise, hip and valley cuts, drilling with helical bits and by milling, all types of cuts, grooves and rebates – automatic feeding of beams – three tool magazines: 9, 2, and 5 positions each. Control panel – Essetre Travi graphical software Available tooling: saw blade, helical cutter head, tenoning cutter, roughing and straight cutters, dovetail cutters, 45° cutters, chain mortising unit Machining dimensions: max length 12,000 mm, max section 800 × 400 mm Itedpexdik Rjfx Afien Overall dimensions: length 27.5 m × depth 390 cm × height 450 cm – total machine weight 12,000 kg Total installed power: 40 kW – 400 Volts – 60A – Air consumption: 400 Nl/min – Compressed air pressure: 6 bar Complete with a set of cutters, drill bits, and various accessories In good technical and visual condition Ref. M26 / y12–pp410k

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. Ijdpfx Aju Nfi Usfietn *

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, working width: 520 mm, FOR SALE – HUNDEGGER K2 4-Axis – SINGLE OWNER – Operated by the same user since 2002. We are reluctantly parting with our first profiling machine. Fully functional, it processes all of our daily projects, amounting to approximately 500 m³ of timber per year (mainly solid wood, about 90%, and 10% laminated wood). Tooling: > Universal circular saw > Universal 4-axis router (two cutter head widths: 80 mm and 35 mm) > Vertical tool support: 2 drills / 1 vertical router with 40/160 mm bit > Horizontal tool support: 1 drill / 1 tilting drill 90-45° / 1 chain mortiser 8x50x480 mm > Side marking > Duplicate tooling for immediate operation > Pit with conveyor belt for chip evacuation > Additional guards for micro-dust extraction Regularly maintained over the years, this machine will suit many traditional carpentry businesses. Computer system (2 PCs and several I/O cards DIO 32 replaced) as of December 2024. Current configuration with 5-m motorized extension to bypass the planer. Inspection possible to see the machine in operation during the week. Dismantling by the buyer possible from 15/12/2025. Itjdpfx Afexcxptjijn SALE PRICE = €50,000 EXCL. VAT

Condition: used, Year of construction: 1999, SECOND-HAND HORIZONTAL MULTIPLE OSCILLATING MORTISING MACHINE COMEC MOD. MMS / 1500 2C + 2UF Iodpfxewrdt Ee Afistn - N. 8 spindles - N. 2 oscillating units - N. 2 drilling units (Left and Right) - Max working length 1500 mm - Locking system - Volts. 380/50 - Matr. 921244 - CE rules - Year 1999

Condition: used, functionality: fully functional, SCM spindle moulder vertically adjustable spindle 3-roller power feed 5 spindle speeds SCM T130 spindle moulder – used – fine-adjustable fence, tenoning and mortising table, Itedpfx Aoxb Au Rsfien right/left rotation Table dimensions: 1,080 x 750 mm, spindle diameter: 30 mm, speeds: 3,000/4,500/6,000/7,000/10,000 rpm, extraction port Ø: 120 mm, lower extraction port Ø: 120 mm

Condition: excellent (used), 4 kW motor Saw with scoring saw Itodpfxer Ddkae Afijn Adjustment of the cutting angle Adjustment of the cutting angle Table length 150 cm

Condition: new, : For sawing, milling, surface planing, thicknessing, and optional mortising : Sturdy cast-iron steel construction : 1600 mm sliding table made of anodized aluminum for maximum cutting precision : Precise and comfortable cuts even with large workpieces thanks to the stable support on the 270 mm wide sliding table : Robust, ribbed cast-iron work tables : Pivoting saw blade from 90° - 45° : Trimming frame with telescopic aluminum crosscut stop and a folding stop for panels and large workpieces : Planing unit comes standard with the TERSA quick-change system with three planer knives : Helical-toothed steel feed roller for consistent workpiece feed during thicknessing : Three milling speeds, manually adjustable from 3,600 - 10,000 rpm : Three independent industrial motors : With lockable main switch Motor protection switch, emergency stop switch : Aluminum sliding table Equipped with a ball contact system proven thousands of times Itjdpfx Aowf I Ruefisn Permanently smooth running Resistant to dust and dirt thanks to minimal contact point between the ball and the trapezoidal rail 10-year Holzkraft guarantee against wear on the guideways Space requirement: Length 3859 mm Space requirement: Width/Depth 2793 mm Explanation of space requirements: The dimensions take into account maximum travel distances or usable lengths. Machine body: Length 802 mm Machine body: Width/Depth 960 mm Working area: Length 1600 mm Working area: Width/Depth 2300 mm

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm Itodpfx Afeu Nfizsisn clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: new, functionality: fully functional, laser type: fiber laser, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, sheet thickness aluminum (max.): 10 mm, working length: 2,000 mm, working width: 1,000 mm, cutting speed: 91,000 mm/min, workpiece weight (max.): 400 kg, power: 6 kW (8.16 HP), type of cooling: water, overall weight: 3,110 kg, total length: 4,049 mm, total width: 1,755 mm, total height: 2,230 mm, Equipment: cooling unit, emergency stop, fume extraction, Configuration: • Bodor Power laser source 6 kW • Bodor Genius laser cutting head with autofocus • Bodor Thinker 3.0 control system • Bed with mortise and tenon structure • Bodor servo motor and driver • Bodor oxygen control valve and nitrogen control valve • 21.5-inch touch screen monitor • Door opening protection • Easily accessible sliding bed • Bodor Lightning perforation technology • Automatic adjustment of cutting gas pressure Iedpfjw U Am Iox Afiotn • Expert database for laser cutting technology • Active anti-collision function • Ergonomic remote control (Bodor Mango®) • Anti-slag protection • Gas-saving nozzles with stable flow • Intelligent maintenance reminder • WIFI internet connection • Laser malfunction alarm • Water chiller • Extraction system

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Itsdpfxow Nv Nxe Afijn Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Iodpfx Afjw I U Nhoiotn Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: excellent (used), Year of construction: 2015, COMEC MD JAMB 9X - Year 2015 MULTI-HEAD CENTRE FOR CUTTING, DRILLING, MILLING WITH CONTROLLED AXIS FOR ANY TYPE OF DOORFRAMES ALSO DIN ADJUSTABLE Itodpouwlvkjfx Afisn EQUIPED WITH AUTOMATIC UNLOADING CONVEYOR - machine can work without loading breaks , while element is during unloading the operator is ready and awaiting to load next element, efficeincy is over 30% higher MAIN STRUCTURE Heavy duty mono-block frame with electro-welded steel sheets.. Nominal working runs (max pieces’ measures): Axis X 2500 mm - Axis Y 350 mm - Axis Z 112 mm OPERATING HEADS n° 3 left / central / right independent operating heads controlled by CN. - Left and right heads: 1+1 cutting/drilling units. Automatic/pneumatic inclination of saw blades/drills groups from touch screen. - Central head: Horizontal units: 2 counter- rotating horizontal electro-spindle for milling; 1 milling, mortising electro-spindle. Special sleeve to carry out slots on the lower side. Vertical unit: 1 vertical electro-spindle for milling; 1 vertical electro-spindle, dedicated to drill the seats for metallic clips. 1 vertical electro-spindle with special drilling head, 5 drills at 90° * LOCKING BENCHES Special benches for completely assembled door jamb loading. Pieces’ holding bench divided into 4 elements adjustable on guides with balls rail system, automatic locking/unlocking and position made by central head (CNC control). PROTECTION Perimetrical protection cabin. According to CE safety prescriptions. Working shavings evacuation belt. CONTROL UNIT SOFTWARE NC CAM SUITE composed by: CAD/CAM TPAED132 – three-dimensional read-out of the piece with programmed workings operations. Complete with movements optimiser and dedicated post processor. Multitasking: the control unit can independently control the 3 heads on the 3 axes in order to have different workings operations at the same time (equal or different) Remote console for the machine testing and set-up by the operator

Year of construction: 2008, condition: ready for operation (used), Various woodworking machines from different manufacturers are available. 1) Max Striffler type 2750 double mitre saw, year of manufacture: 1983. 2) Stegherr KSF-V universal cross rung miller, year of manufacture: 1991. 3) Stegherr SDB dowel drilling machine for frame constructions, year of manufacture: 1988. 4) Axel Wirth LW 100.5/300, year of manufacture: 2008. 5) Ruchser RU-EBL2.5-M fitting drilling machine, year of manufacture: 2001. 6) Max Mayer (MAKA) STV 170 oscillating chisel mortising machine, year of manufacture: 1994. 7) Max Mayer (MAKA) STV-71 oscillating chisel mortising machine, year of manufacture: 1987. On-site inspection is possible. The machines are only available as a package. Itedpfxsv Amq Ne Afijn

Condition: used, Used chain cutter Ijdpjw Nab Esfx Afistn older model stationary version Availability: short term Storage location: NRW