Used Chisel for sale (130)

Condition: used, Year of construction: 1968, Unit can be swiveled. Unit can be moved left and right via handwheel. Maximum milling depth: 150 mm - 180 mm. Slot length: approx. 250 mm. Weight: approx. 320 kg. Storage location: Nattheim. Fpjdpfxozkl T Us Ak Ujl

Year of construction: 2018, condition: used, functionality: fully functional, Desoutter ECSF4 + CVIC II-H2 – 12 Complete Screwdriving Systems For sale: 12 complete Desoutter industrial electric screwdriving systems, consisting of CVIC II-H2 controllers and ECSF4 electric screwdrivers. The equipment comes from a single industrial installation. All units have been kept as complete controller + screwdriver pairs. Scope of supply: 12 × Desoutter CVIC II-H2 controllers 12 × Desoutter ECSF4 electric screwdrivers 6 × screwdrivers in a straight configuration 6 × screwdrivers with additional/special head attachments 12 × additional screwdriver attachments Original connection cables Additional mounting parts and accessories as shown in the photos Technical information: Manufacturer: Desoutter Industrial Tools Controller: CVIC II-H2 Screwdriver: ECSF4 Maximum torque: 4 Nm Fpsdjzw U Rpspfx Ak Usl Programmable tightening parameters Torque and angle control Integrated cycle counter Designed for professional assembly stations and automated production applications Condition & Cycle Count All units have been powered on and tested. The systems have similar usage, with approximately 2.3 million tightening cycles per system. Cycle counts have been checked directly in both the controller and screwdriver memory. Example from one system: Controller: 2,319,594 cycles Screwdriver: 2,319,700 cycles The very similar controller and screwdriver cycle counts indicate that the units have been operated together as matched systems. Exact cycle counts for individual units can be provided upon request. The equipment is in good used industrial condition, with normal signs of use. Please refer to the photos for the exact condition and included accessories. Sale of the complete lot of 12 systems is preferred, but smaller quantities may also be available upon request. European and international shipping can be arranged. Additional photos, serial numbers, individual cycle counts and videos showing the equipment in operation are available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Fpjdpfexwpitex Ak Ujl Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Fedpfszqzhbsx Ak Uopl Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Condition: used, Year of construction: 1973, Storage location: Nattheim Fedpovvkt Uofx Ak Uepl

Condition: excellent (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, For sale: Drozdowski PRP-58 log saw. Year of manufacture: 2023. The machine has been used very little. Wood is fed by a chain, enabling cutting of logs from 0.8 to 4.5 meters in length. Fpedpfjzuwz Ejx Ak Uol Automated log handling with hydraulic system and side discharge of cut material. The entire unit is mounted on a steel frame, which allows for cutting without the need to chisel the floor or create openings for sawdust and flywheels. A large number of saw blades and spacers in various sizes are included. I also have a blade guide and a sharpening tool for these blades.

Condition: used, Chain chisel machine, chiseling machine Fedpfxjqv A U Io Ak Uepl

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing Fodpezp Nz Tofx Ak Uspl ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: Fpsdpfx Ajx U Tr Ajk Uel *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm Fjdpfx Aezz Rfdok Ujpl spindle bore: 68 mm internal taper diameter: 68 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable Fodpjvxu Dvofx Ak Uopl fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Fsdpfx Akjzx Nx Ro Uspl Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) Fpedpovxux Hsfx Ak Uel - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Fodpfxovtf R As Ak Ujpl Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Fodpfx Aov Tbh Rjk Uopl Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Fpodjvtf Arspfx Ak Usl Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Fpodovvku Eopfx Ak Uol

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Fjdjv Tbz Depfx Ak Uepl Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger Fodpfsyc Rvasx Ak Ujpl • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, functionality: fully functional, The Jama SBU 8000 machine from 2012 is a robust and proven mechanical scaler, specifically designed for operation in demanding mining conditions, especially underground workings. This model is equipped with a hydraulic breaker for rock demolition, making it the perfect tool for removing loose rock fragments and preparing tunnels for further work. The listed machine comes fitted with an EPIROC breaker, including an additional new chisel. Attention! At the dealer, the price of a brand new JAMY machine is as much as €903,000 NET! That is for the machine only, without any additional equipment such as a demolition hammer. Fpodpowl Izajfx Ak Ujl - We have 2 identical SBU 8000 machines on offer. The one in this listing is from 2012, and the other is from 2008 and nearly €10,000 cheaper! Also available: JAMA machine for concrete spraying in tunnels Designed for finishing and reinforcement work in underground passages and tunnels High efficiency, precise spraying and large operating range Ideal for use in mining, tunneling and major infrastructure projects Key Technical Features – Jama SBU 8000 Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below machine level to 9 m above, and over 6 m sideways Operator cabin: complies with FOPS standards, fitted with an armored front window and hydraulically controlled explosion-proof guard Chassis: two axles, turning radius 5.2 m Stabilization: four stabilizing outriggers and a front dozer blade Safety system: 'Danger Mode' function allows rapid machine retreat in case of danger Operator Comfort and Ergonomics The operator’s cabin is designed for maximum comfort and safety: Operator seat: pneumatically suspended Controls: joysticks integrated in armrests Visibility: 13° tilting cab for improved worksite visibility Additional features: boot washer at the entrance, doors with gas struts enabling quick cab exit if necessary Currently, we have three similar machines available: 2x Jama SBU8000 – 2012 & 2008, both with EPIROC breakers 1x Jama machine for concrete spraying Technical Specifications – Deutz TCD 2013 L04 2V/m Engine type: Four-stroke, inline, 4-cylinder Displacement: 4.8 litres (4800 cm³) Bore × stroke: 108 × 130 mm Compression ratio: 18:1 Fuel system: Common Rail injection (DCR) or mechanical Maximum power: 104–129 kW (140–173 HP) at 2200–2300 rpm Maximum torque: 565–670 Nm at 1600 rpm Idle speed: 650–900 rpm Fuel consumption (at full load): 208–218 g/kWh Weight (without accessories): approx. 500 kg Cooling: Liquid Direction of rotation: Counterclockwise (viewed from flywheel) The price given is NET and applies for export and business customers. Significant discounts are possible for individual buyers – We invite you to contact us directly by phone to secure your best price :)

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Length: 301 mm Weight without battery: 1.25 kg Fsdpfx Akjv Ipt Rj Ujpl Other tools for industrial production and maintenance on request.

Condition: excellent (used), ///// PRICE LISTED FOR 1 UNIT ///// For sale: Professional Bosch Rexroth industrial screwdrivers designed for use in production lines and assembly workstations. The devices are characterized by high precision, durability, and the ability for continuous operation in industrial environments (automotive, series production). The items are used. They show normal signs of use but are in good technical condition. ⚙️ Available models (choose one) 🔹 Rexroth ESA075G-G (0 608 841 230) Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G (0 608 841 247) Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G (0 608 841 212) Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G (0 608 841 225) Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common specifications Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Fedpjyzkhujfx Ak Uepl Manufacturer: Bosch Rexroth 📦 Scope of supply ✔️ 1x screwdriver (selected model) ✔️ Head (as per photo – straight or angled) 📊 Condition Used – normal signs of wear. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry series production precision tightening

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P Fpedpjv Ipclofx Ak Usl without battery with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Fsdpev Inwzofx Ak Uepl Torque: 10 Nm Idle speed: 1050 min-1 Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 Fpodpfjdcmdlex Ak Uol IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions