Mortising machine

Haffner Typ KF 20

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Lodohubg Topfx Anuoac Weight: 260 kg Device tested - function is working properly.

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 300 mm, spindle bore: 51 mm, turning diameter: 575 mm, center width: 2,000 mm, spindle speed (max.): 1,600 rpm, overall weight: 2,200 kg, capacity 2000x575 mm diameter 300 mm on cross-slide spindle bore 51 mm external electrical cabinet weight 2200 kg Lasdpjyar Apofx Anuec

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Laedpfxjwt Sy Ae Anujc Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), Tailstock Taper size: MK 2 Lajdpfodlp Txox Anuec Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Base area: 230 x 155 mm Weight: 27 kg

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: Ljdpeymznhofx Anuoac >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Laodpfx Anjw T Tcweusc Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Lasdsvh H Hhspfx Anuoc Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm Lodpfx Anow T Tfrsujac End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: excellent (used), Conventional lathe Inv. no. 3506 Lodpfexp Idgox Anusac Ayel-Tech Model BT 400 * Turning length: 1000 mm * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck * Emergency stop * Change gears * Chip guard/rear panel * Documentation * 400V

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Lajdpfxsx Scv Eo Anusc Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)