Used Mori Seiki Nh 4000 for sale (202)

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Gedpsx D Sc Nefx Af Uoip Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial Number: 450 The machine is still under power and can be made available at short notice. • P8 power supply valued at 1500.- was replaced as recently as August 2024 • The spindle was repaired in 2017 and since then has mainly been operated in single-shift mode. As we primarily produce individual parts and small batches, the machine has spent most of its time being set up rather than running Giedpfx Aeyt Nnpsf Uop • Machine: Mori Seiki SH-50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed on the X-axis has been reduced by 20% to extend the life of the telescopic covers. Seal ring on the pallet changer is likely defective, resulting in oil leakage. As a temporary fix, we have installed a ball valve in between; whenever a pallet change is required, the valve is opened. This doesn’t happen very often. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 56 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 460 mm, rapid traverse Z-axis: 80 m/min, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, fuel: electricity, number of slots in tool magazine: 40, Mori Seiki MT 1500 SX 9-axis milling and turning center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum chuck length of 920mm, maximum diameter of 400mm, bore size of 65 mm, 4000 and 6000 rpm spindle rotation, and 12,000 rpm milling spindle. 12-position turret with live tools, Y axis, B axis +/- 120, C axis 0.001, ATC 40 tools, and chip extractor. In excellent working condition and can be seen working in Portugal. Gijdpfoh Elp Eex Af Uop

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm control Fanuc MSD 501 (Fanuc 16i) spindle speeds 10000 U/min spindle drive 22 kW rapid travel x/y/z 32 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,5 t Gjdpfx Aoyq Sllsf Ujip table index 1 ° total power requirement 56 kVA weight of the machine ca. 8,7 t dimensions of the machine ca. 2,9x4,1x3 m Control Fanuc MSD 501, 40 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. Gisdpfsyq Emijx Af Uep This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Godpfx Afeypb Nks Ujip Year 1991 CNC Fanuc Sold complete With documentation With chip conveyor

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Gedpfewhkcxjx Af Usip Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Gedpfx Aoyguzzof Uoip Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, 170mm 3 Jaw Chuck

Condition: ready for operation (used), Year of construction: 1998, Horizontal machining center MH-400 with 10-station pallet pool; Flat guideways; Pallet size: 400 x 400 mm; Additional 10 exchange pallets; Pallet can be indexed in 1° increments; Internal coolant supply with Knoll system; 120 tool stations; 10,000 rpm; Chip conveyor; Fanuc control; Machine can be inspected under power by appointment; Price includes machine disassembly! Loading and transport are not included in the price; Godoyrryrspfx Af Ujip

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Giedpfjym T I Tsx Af Uop Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), TECHNICAL DETAILS CNC Control: FANUC Series 31i-A5S X axis (mm): 500 Y axis (mm): 350 Z axis (mm): 510 B axis (mm): +160 to -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø350 Table load capacity (kg): 300 Cutting feed rate X,Y,Z (mm/min): 50,000 / 50,000 / 40,000 Maximum rapid traverse X, Y, Z (m/min): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool magazine capacity: 120 positions Max. tool diameter (mm): 90 Gedpfxeym Rt To Af Ujip Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant system Hydrajet WP10-1000: Included Electronic handwheel integrated into CNC panel: Included Coolant oil separator: Included MACHINE DIMENSIONS Length (mm): 2,339 Width (mm): 3,820 Height (mm): 3,250 Weight (kg): 9,400

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse speed: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw diameter: 36 mm Feed drives: FANUC AC, X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing increment: 7.5 degrees Indexing accuracy: + / - 2 seconds Repeatability: + / - 1 second Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamping time: 7 sec Max. tool diameter: 110 mm Gijdpfx Afst Rg E Sj Usp Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Workcompletion indicator with warning light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2013, CNC Control: M730BM X mm: 1,050 Y mm: 530 Z mm: 510 Worktable dimensions mm: 1,350 x 600 Table load capacity kg: 1,200 Distance spindle nose to table mm: - Gjdpfx Aeymxbfof Ueip Cutting feed mm/min X,Y,Z: - Max. rapid traverse m/min X, Y, Z: 30,30,30 Spindle speed rpm: 12,000 Spindle power HP: - Taper type: BT-40 Torque Nm: - Tool changer type: - Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 150 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: - Through-spindle coolant bar: - EQUIPMENT Chip conveyor Work light Electronic handwheel BT-40 taper

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS Gedpsymmqbofx Af Ueip HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter - mm turning length - mm control M 730 BM Additional information CNC control: Gjdpfxoyml Dmo Af Usip M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: like new (used), operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. Godpfxeyqu R Ds Af Usip * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 200 mm, turning diameter: 150 mm, spindle speed (max.): 5,000 rpm, spindle bore: 48 mm, bar passage: 45 mm, CNC MSC 501 CAPACITY: Maximum turning diameter: 150 mm Maximum swing diameter: 420 mm Maximum turning length: 200 mm SPINDLE / SUB-SPINDLE: Spindle / sub-spindle bore diameter: 48 mm Gsdpfx Ajyn Rm Njf Ueip Bar capacity (spindle / sub-spindle): 45 mm Spindle / sub-spindle nose: ASA 5 Spindle / sub-spindle speed: 5,000 rpm Spindle motor power: 7.5 kW Sub-spindle motor power: 7.5 kW Machine equipped with: Tool presetting on spindle and sub-spindle No. 2 motorized turrets, 12 positions each Instruction manuals and CE declaration Year of manufacture: 1999

Condition: used, Year of construction: 1999, turning diameter max. 900 mm turning length max. 2.000 mm control MSD 501 II turning diameter over bed 994 mm turning diameter over cross slideways 733 mm standard turning dia. 374 mm centre distance 2.300 mm turning speed range - main spindle 3 - 1.500 min/-1 power capacity - main spindel 43 / 37 kW Number of speed ranges 3 spindle bore 205 mm chucking diameter 500 + 500 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 65 mm x-axis 485 (450 + 35) mm z-axis 2.150 mm tailstock 2.100 mm diameter of quill 150 mm quill stroke 150 mm rapid traverse X: 20 / Z: 20 m/min Tipp feed 0 - 1.260 mm/min total power requirement 65 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 8,0 x 4,0 x 3,2 m CNC - Oil pipe Lathe MORI SEIKI - SL 600 B / 2000 CNC lathe with front and rear chucks Gjdpeylzv Njfx Af Uoip and high drive power for pipe machining Features: - Pneumatic front chuck 500 mm with 205 mm bore - Pneumatic rear chuck 500 mm with 205 mm bore Control Options: - Variable thread pitch - Program memory expansion - Tool correction expansion

Condition: like new (used), Year of construction: 2008, turning length: 1,542 mm, turning diameter: 660 mm, spindle speed (min.): 12,000 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 1,525 mm, workpiece weight (max.): 8 kg, total height: 2,900 mm, total length: 6,800 mm, total width: 3,200 mm, overall weight: 25,600 kg, CNC controller: FS-31IA5 (MAPPS 3) Capacity Z-axis travel mm: 1.550 + 100 Turning length mm: 1.542 Max. turning diameter mm: ø: 660 Swing over bed mm: ø: 730 Bar work capacity mm: 80 / 80 Turning diameter f. lower turret mm: 350 Distance between spindle centers mm: 1.862 Turn-mill spindle X-axis travel mm: 750 Y-axis travel mm: ±210 B-axis degree: ±120° (Index 1°) C-axis degree: 360º (0,001º) Speed spindle rpm: 12.000 Drive power kW: 18,5 / 11 (30min/cont) Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool length max. mm: 400 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Milling function: PROVIDED Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22 / 18,5 (30min/cont) Spindle bore mm: 91 Counter spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22 / 18,5 (30min/cont) Spindle bore mm: 91 Coolant system High-pressure bar: 28 Equipment Electronic Handwheel Chip conveyor Tool breakage probe Workarea light Blowing air outside the spindle Coolant gun Internal coolant supply Measuring probe Gantry loader LG-10; 10 Pallets, 10kg per Hand, pieces of Ø200 x 150 (W x H) Basic machine dimensions / weight Length mm: 6.800 Width mm: 3.200 Height mm: 2.900 Weight kg: 25.600 Gedpsylwx Tefx Af Ujip

Condition: excellent (used), functionality: fully functional, Driven Tools Machine: MORI SEIKI SL2000 Turret Manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request 1x→ No. 444-201 Double Turning Tool Holder For main spindle and sub spindle With 1 clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request 1x→ No. 444-210 Boring Bar Holder Giedpfx Asynb E Nef Uep Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Gijdoyk Hrgspfx Af Uep Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: like new (used), Year of construction: 2017, operating hours: 3,493 h, turning diameter over cross slide: 742 mm, turning length: 705 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, spindle motor power: 15,800 W, total height: 2,200 mm, total length: 3,350 mm, total width: 2,110 mm, swing diameter over cross slide: 742 mm, workpiece weight (max.): 500 kg, overall weight: 5,820 kg, bar passage: 80 mm, Year of construction: 2017 CNC controller: Mitsubishi M730UM mit CELOS Capacity Y-axis travel mm:±50 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 920 Swing over cross-slide mm: 742 Bar work capacity mm: 80 Upper turret X-axis travel mm: 260 Z-axis travel mm: 795 Number of tool slots St .: 12 Speed ​​driven tools RPM: 10000 Main spindle Speed ​​spindle rpm: 4000 Drive power spindle kW: 15.8/15 Spindle bore mm: 111 Chuck type: 10" Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Counter spindle Speed ​​spindle rpm: 6000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: 6" Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Gijdpfsykt Dcjx Af Ujp Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Working time hours Under power: 3493 Spindle 1: 1700 Rated power kVA: 45 Basic machine dimensions / weight Length mm: 3350 Width mm: 2110 Height mm: 2200 Weight kg: 5820

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm control Fanuc Gjdpfx Asxzk Rtjf Usip

Condition: ready for operation (used), Year of construction: 2009, operating hours: 27,745 h, functionality: fully functional, machine/vehicle number: NT320110134, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The offer includes a comprehensive tool package (see attachment; an Excel table can be provided on request)! An inspection checklist for 2025 is also included. TECHNICAL DETAILS Maximum workpiece swing diameter: 600 mm Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum machining diameter at tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Axes X-axis tool spindle: 685 mm Y-axis tool spindle: ±125 mm Z-axis tool spindle: 1,075 mm B-axis swivel range: ±120° Gisdpfx Afsyml Eqo Usp X-axis turret 2: 130 mm Z-axis turret 2: 970 mm Main spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Counter spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Tool spindle (Turret 1) Maximum speed: 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating Hours Power-on hours: 131,963 h Operating hours: 68,391 h Spindle hours: 27,745 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,709 h, functionality: fully functional, machine/vehicle number: NT320GE0052, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The machine's tool spindle was replaced in 2022! The offer includes a comprehensive tooling package (see attachment; an Excel tool list can be provided upon request)! TECHNICAL DETAILS Maximum workpiece swing diameter: 600 mm Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum turning diameter with tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Travel paths X-axis (tool spindle): 685 mm Y-axis (tool spindle): ±125 mm Z-axis (tool spindle): 1,075 mm B-axis (swivel range): ±120° X-axis (turret 2): 130 mm Z-axis (turret 2): 970 mm Main spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Counter spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Milling spindle (turret 1) Speed: max. 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating hours Power-on hours: 138,593 h Giodpfx Aeymlvvef Uep Operating hours: 66,865 h Spindle hours: 29,709 h