Used Mitutoyo Toolmakers Microscope for sale (138)

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,200 mm, total width: 1,100 mm, total length: 1,100 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 520 kg, input voltage: 230 V, operating temperature: 1,626 °C, pressure: 4 bar, Very nice and visually appealing 3D CNC measuring machine at a very attractive price. Three-dimensional measuring within three microns! Fully meets its specifications. Inspection and demonstration are possible. Fjdpfx Aeywd Eljcwjga Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Resolution 0.0001 mm CNC speed 520 mm/sec Maximum acceleration 0.23 g Can be loaded with workpieces up to 180 kg Height 220 cm Width 110 cm Length 115 cm Air-bearing axes (5 Bar supply) Operates on 230 Volt to controller (CMM itself is low-voltage) Includes PC, monitor, mouse/keyboard Software MCOSMOS-1 v3.0 (upgrade possible)

Condition: repair required (used), functionality: not functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 450 mm, Mitutoyo BH706 coordinate measuring machine. Mechanically in very good condition, it operated and performed high-precision measurements until the hard drive failure. Fgedpfoyvq Ausx Acwja The machine is being sold as non-functional, intended for refurbishment or upgrade. Note: The photos of the machine were taken when it was still operational. Currently, the machine is dismantled and packed for loading.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Fodpfxoyvit Ss Acwjga Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request!

Condition: ready for operation (used), Year of construction: 2001, This 3-axis Mitutoyo Quick Scope QS-250Z was manufactured in 2001. It features a measuring range of X=200 mm, Y=250 mm, Z=100 mm, and a maximum travel speed of 80 mm/s. The machine includes a 1/3" CCD color camera and various lighting options, enhancing visibility and precision. Ideal for detailed component analysis, consider the opportunity to buy this Mitutoyo Quick Scope QS-250Z CMM machine. Contact us for more information about this machine. Additional equipment • Software: QSPAK Version 3.1 / Operating system: Win10pro Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 465 mm x 815 mm x 663 mm / weight (kg): 76 kg Fsdpsx Nr Tbjfx Acwjga • Max. Workpiece weight: 10 kg • Table glass dimensions: 269 mm x 311 mm

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Fjdpjx D D Absfx Acwega Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip

Condition: ready for operation (used), Year of construction: 2004, total height: 2,730 mm, product length (max.): 1,470 mm, CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details. • Accuracy: MPEE = 1.9 µm + 4·L/1000 (with Renishaw TP200 probe) • Temperature compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning card) Fsdpfx Aoyhgbpecwjga Additional equipment • Probe head: Motorised Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probing system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Stylus set: Basic stylus set (5 pcs) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning Probes, Laser Probe Support, Export Status Information • Computer system: Industrial PC with Windows 10 operating system

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, overall weight: 2,947 kg, number of axes: 3, This 3-axis Mitutoyo Crysta-Apex S9166 was manufactured in 2018. It features a comprehensive measuring range with X-axis at 900 mm, Y-axis at 1600 mm, and Z-axis at 600 mm. Equipped with CNC control and MCOSMOS-3 CNC V4 software, it includes a Renishaw PH10MQP R2 indexing probe head and SP25M scanning probe system. Additional equipment includes eco-fix CMM fixturing systems and a high-capacity CEE power cable. Consider the opportunity to buy this Mitutoyo Crysta-Apex S9166 CMM machine. Contact us for more information. • Control & software: CNC control; MCOSMOS-3 CNC V4 • Probe system: Renishaw PH10MQP R2 indexing probe head; SP25M scanning probe system; multiple stylus holders (SH25-2); starter probe kit (M3); ceramic calibration sphere Ø20 mm (with factory certificate) • Option: Gear measurement option purchased in 2021 • Condition/usage: Machine was in the quality control room for final inspection • Mounting plates: All aluminum mounting plates installed on the measuring machine Additional equipment • Workstation (PC, keyboard, mouse) • 2× HP 23" monitors (1920 × 1080) • USB dongle / Wibu-Box license • eco-fix CMM fixturing system (kits S and L) • Quick-rail base kit • J/S Box-M Type A • High-capacity CEE power cable Fodpfx Acsydm Hkewjga • Various buttons, 5-10 pieces (6 adapter plates)Height-adjustable desk1 tool trolley with contents3x large aluminium plates 800x40030 small aluminium plates with various fixtures. 250x250Centre clamp vice / 3-jaw chuck, etc.

Condition: used, functionality: unexamined, Ferwood Code: RU0011952 – Manufacturer Code: PJ-300H – Condition: Used – Functionality: Not tested – Compatible Machine: – If interested, we offer an overhaul service, please contact us. 140KG 120X80X115 Fodpfx Acoyrplrewsga

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Fjdpowqrvlsfx Acwega Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2012, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, overall weight: 579 kg, Immediately available. Nationwide delivery (Germany) within a maximum of 7 days after order. General machine data: Machine type: Quick Vision APEX QV-T1404 Year of manufacture: Mid 2012 Manufacturer: Mitutoyo Measuring range: 400 x 400 x 250 mm Control: Mitutoyo QV Remote Box Operating manual: Available Hardware and software equipment: Fgsdsw Hqx Ropfx Acwsa PC/CPU: Brand new Monitor: Brand new Software: Mitutoyo QVPAK V13.2 Probe holder: Renishaw PH-6 with PI200-3 Probe: Renishaw TP200 Power supply: Mitutoyo Power Supply Unit 600 Additional accessories: Objectives - 02AKT250 1x & 02AKT300 2.5x This Mitutoyo Quick Vision Apex CNC from mid-2012 is designed for versatile measurement applications. Equipped with modern hardware and the latest Mitutoyo software, it offers high precision and reliability. The comprehensive range of accessories, including the Renishaw probe and calibration sphere, enables diverse measurement tasks. Kneissl Messtechnik GmbH is a trusted partner of Mitutoyo. Thanks to our close cooperation, we can respond individually to customer requirements and make specific adaptations to the Mitutoyo Quick Vision Apex.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V Fodpfx Aeyc H I Socwsga • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: good (used), functionality: fully functional, Purchase your coordinate measuring machine from the largest CMM specialist with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. Machine Data Machine Type: CNC Crysta Apex C776 Manufacturer: Mitutoyo Measuring Range: 700 x 700 x 600 mm Controller: UC-200 Accessories Renishaw PH-10M Renishaw TP200 Renishaw SCR200 Bilz vibration damping system Optional MRT320 rotary table As specialists, we are happy to provide you with individual consultation to find the right machine for your measurement requirements. Worldwide delivery available upon request! Fjdpfxsxqnywj Acwsga On request, we can also offer calibration or maintenance services. We are happy to advise you on all aspects of CMMs. If you are looking to sell your machine, do not hesitate to contact us. Leasing or hire purchase options are available by arrangement. We will find the right machine for you!

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Fedpoyhmg Sefx Acwega Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine (CMM) from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex C9168 Year of manufacture: mid-2006 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 800 mm Controller: UC-200H Operation manual: available Accessories: Probe head mount: Renishaw PH10MQ Probe head: Renishaw TP200 Additional accessories: Ceramic calibration sphere Renishaw change rack 1 x SCR-200 Fgodpfx Asxqnxaocwea We are happy to provide individual advice as specialists to find the right machine for your measuring task. Worldwide delivery available on request!

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Fgodpfsynkbasx Acwea Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Fodpfjyg Nl Usx Acwsga Probe: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Fodoyg Iryepfx Acwoga Machine type: Crysta Apex 9106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consulting as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta C Apex 9208 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 2000 x 800 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 Fjdpfxeyg Iy De Acwega We are happy to provide individual consultation as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 1200 x 3000 x 1000 mm Accessories: Fgedpfx Acjyg I Alowsa Probe head mount: PH10MQ Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a used machine that has been checked, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta Apex 9166 Year of manufacture: 2005 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 600 mm Fgsdpsyg Iubofx Acwsa Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer individual advice as specialists to help you find the right machine for your measurement application. Worldwide delivery available on request!

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 4000 mm z-travel 1200 mm Fsdpfxoxcbhxj Acwjga workpiece weight 3500 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: N93040010, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 500 kg, type of input current: DC, overall weight: 2,500 kg, Equipment: documentation/manual, type plate available, For sale: fully operational and working coordinate measuring machine (CMM) from the renowned manufacturer Mitutoyo. Currently in use in the quality control department within the machining industry. Ready for immediate operation without the need for additional investment. Technical specifications: Year of manufacture: 1992 Serial number: N93040010 Design: bridge type Measuring range (X/Y/Z): 700 / 1000 / 600 mm Software: MCOSMOS 3.0 (license assigned to workstation) Computer included The machine operates in a controlled environment: 🌡 20°C ±0.5°C (air-conditioned metrology room) Fgsdpsytccmjfx Acwja 🎯 Probe head and probing system: Renishaw PH10 head + spare PH10 Renishaw TP200 probe Mitutoyo probe rack – 6 positions (with a set of probes) Condition of heads and probes: very good Ideal configuration for precise measurement of machined components. 📋 Technical condition & documentation: Machine in continuous operation (quality control) Last calibration and service: 17.07.2025 Valid calibration certificate until 31.07.2026 (issued by an accredited calibration laboratory) Last service: complete replacement of pneumatic hoses (07.2025) Technical condition: very good The machine currently measures components requiring high precision. 📦 Additional equipment: Granite table Original documentation Possibility to inspect the machine in operation Contact details for a trusted service and training provider can be provided 📍 Location & sale: The machine can be inspected by prior arrangement. Sale with VAT invoice. Price: negotiable.

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos12 Manufacturer: Mahr Measuring range: 125 – 170 mm Scale division: 0.01 mm Pos13 Manufacturer: Unknown Measuring range: 195 – 220 mm Scale division: 0.01 mm Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100–125 mm Scale division: 0.01 mm Pos15 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos18 Manufacturer: PAV Measuring range: 250–275 mm Scale division: 0.01 mm Pos19 Manufacturer: Hommel Werke Measuring range: 200–225 mm Scale division: 0.01 mm Pos20 Manufacturer: Mahr Measuring range: 70–95 mm Scale division: 0.01 mm Pos21 Manufacturer: Unknown Measuring range: 100–125 mm Scale division: 0.01 mm Pos22 Manufacturer: Mahr Measuring range: 45–70 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos24 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos25 Manufacturer: Mitutoyo Measuring range: 0–25 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Fedpfxsyhmwqo Acwega Measuring range: 0–25 mm Scale division: 0.01 mm Pos27 Manufacturer: Mahr Measuring range: 195–220 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70–95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25–50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos31 Manufacturer: Mahr Messtechnik Measuring range: 195–220 mm Scale division: 0.01 mm Pos32 Manufacturer: Mahr Measuring range: 220–245 mm Scale division: 0.01 mm Pos33 Manufacturer: Mahr Measuring range: 245–270 mm Scale division: 0.01 mm Pos34 Manufacturer: Mahr Measuring range: 270–295 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120–145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150–175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175–200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250–275 mm Scale division: 0.01 mm Pos41 Manufacturer: PAV Measuring range: 275–300 mm Scale division: 0.01 mm Thread micrometers – Measuring micrometers Micrometer – Micrometer screw gauge – Measuring instrument e.g. for gear measurement – External measuring instrument – Disc

Condition: used, Technical details: measuring range Y-axis: Höhe: 0 - 600 mm interface: RS232 weight: 24 kg power consumption: 43 Watt Floor Space WxD: 0,237 x 0,448 x H: 1,013 m High-precision height measuring device Linear Heigth with a glass scale for high accuracy. With LCD display and keypad. This is a table-top device. The main unit can be easily moved in a semi-floating position on a measuring plate using a push-button (float switch). The carriage can perform both automatic and manual movements. incl. eccentric probe at the tip with a ball Ø 4.5 mm Data output RS-232C interface the measuring carriage is guided by roller bearings, motor-driven and/or manual Measuring system - glass measuring system (incident light method) Compressed air supply via built-in compressor Operation via control panel (with graphic display) with granite plate without table * Fsdpfx Asxcvqnocwsga

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks. Fgodpfsw Rdt Iex Acwsa