Coordinate measuring machine

Mitutoyo Crysta Apex 121210

Condition: used, Year of construction: 2008, x-travel 800 mm Lsdpsw Df A Ssfx Agzehc y-travel 700 mm z-travel 600 mm control SIN 840D Powerline spindle turning speed - stepless 1 - 8.000 U/min power capacity at 40 % load 28,00 kW spindle diameter in front bearing 80,00 mm spindle taper HSK-A100 B-axis 187 ° feed X/Y/Z-axis 15.000 mm/min rapid traverse X/Y/Z 50,00 m/min feed force X/Y/Z axis 10.000 N rapid traverse B-axis 11,20 U/min size of pallet 800 x 630 mm table load 0,80 t c-axis 360,000 x 0,001 ° table turning speeds 1 - 500 U/min toolpiece magazine: chain magazine 120 Stück tool diameter 100 mm tool diameter with 2 vacant positions 160 mm tool length - max. 350 mm weight of tools max. 10,00 kg total power requirement 60,00 kW weight of the machine ca. 13,00 t dimensions of the machine ca. 7,40 x 5,30 x H3,50 m With Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system, 2 pressure levels (40bar / 80bar), chip conveyor, operating mode 4, exhauster.

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. Lhjdpfxoxlza Hj Agzsc The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Year of construction: 2000, condition: used, x-travel 1000 mm Ljdpfx Aot Hw Nyegzshc y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Ljdpfx Ageipq I Ijzehc Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Lhodpfx Aexyaf Djgzsc Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, ZEISS ACCURA measuring machine 12/10/10 automatic Measuring range: 1200x1800x1000 Head: ZEISS RDS CAA Sensor: ZEISS VAST XXT - TL3 Probe changer: 3 stations Controller: ZEISS C99 Lodpfxjxq R R Ee Agzshc Software: Calypso 2011 Year of manufacture: 2011 Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition

Condition: good (used), Year of construction: 2000, 5-axis machining centre DECKEL MAHO DMU 200 P, No. 1099 000054 3, year of manufacture 2000 (complete overhaul in 2024), machine hours: 22,852 (spindle: 77,915), travels XYZ = 1,800 x 2,000 x 1,100 mm, HEIDENHAIN control, tool changer, with filtration system. Lodpfx Agoyhqzmezehc

Condition: good (used), Year of construction: 2006, 2006 Deckel Maho DMU 125 FD duoBLOCK 6-Axis Universal Turn/Mill Machining Centre with Siemens Control 'T' Slotted Table Ø1,250 x 1,100mm (11 'T' Slots). Maximum Table Load 2,000kg. Axis Travel 'X'=1,250mm, 'Y'=1,000mm, 'Z'=1,000mm, 'A'= +180/-30°, 'B'=360°. Rapid Traverse 60m/min. Table Turning Speed Range 20-500rpm. Maximum Spindle Speed 10,000rpm (59kW Motor). 60 Position ATC. Spindle Taper HSK A100. S/No.1163 000011 3 (2006). The machine is available due to new capital investment and must be removed by 27 April 2026. Please note that the buyer will be responsible for providing suitable lifting and transport brackets for removal. Lhedpsyim H Esfx Agzoc With Dual Auger To Chip Conveyor, Spindle Inspection Probe Interface, Blum Laser Tool Setter, Paper Filtration Through Spindle Coolant System, Chiller Unit, Losma Darwin 3000 Mist Extractor Unit & Handwheel.

Condition: ready for operation (used), total width: 2,011 mm, NIKON-Metris X: 1000 – Y: 2500 – Z: 800 mm Het LK V-SL- model beschikt over een revolutionair ontwerp dat de beste scan- en inspectieprestaties levert van alle werkende CMM's op de markt. De multisensor LK V-SL coördinatenmeetmachine onderscheidt zich door zijn unieke karakter en voldoet aan de eisen van de automobiel- en lucht- en ruimtevaartindustrie. Dankzij de mogelijkheid om zeer nauwkeurige metingen uit te voeren (HA – High Accuracy), versterkt dit systeem als referentie-CMM voor metrologielaboratoria en biedt het een submicronnauwkeurigheid voor toepassingen die de hoogste meetnauwkeurigheid ingewikkeld. Laatste kalibratie: 19 Renishaw-besturingssysteem: -Probekopcontroller: PHC 10-2 -Interfaceselector 191-2 -Probe-interface PI 200 -TP 200 Renishaw-meettaster Laserbesturingssysteem. LC60DX De LC60Dx is ontworpen voor 3D-laserscanning met hoge snelheid en een gemiddeld bereik op coördinatenmeetmachines (CMM's). Het apparaat biedt uitstekende prestaties bij het scannen van grote onderdelen, zoals mallen, autopanelen of structurele componenten, met een nauwkeurigheid tot 9 micron. Renishaw PH10M - Gemotoriseerde indexerende meetkop Rotatie-assen: A-as: ±180° B-as: 0–115° Indexeringsstap: 7,5° → wat een totaal van 720 positieve positieve positieve resultaten oplevert Interface: Autojoint/M8-aansluiting (compatibel met modulaire testsystemen zoals Renishaw TP200, SP25M of Nikon/Metris laserscanners) Maximaal stylusgewicht: ca. 300gr Maximale styluslengte: tot 300 mm Positie herhaalbaarheid: ±0,4 µm (0,0004 mm) Toepassingen: Meting van onderdelen met complexe vormen (turbinebladen, mallen, behuizingen, enz.) Wordt gebruikt in combinatie met probes zoals Renishaw SP25M, TP200 of Nikon/Metris LC15Dx Compatibel met de meeste CMM-merken (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - snelwissel-klemsysteem voor gebruik op CNC-machines. Het is bedoeld voor het vastzetten van pallets, het opspannen van werkstukken op de machinetafel met een zeer hoge positioneringsnauwkeurigheid (tot 0,005 mm). Fabrikant: SCHUNK (Duitsland) Model: VERO-S NSE plus 90 Type: Snelwisselklemmodule Modulediameter: 90 mm Bedrijfsdruk: 6 bar Klemkracht: tot 25.000 N (25 kN) Materiaal: gehard roestvrij staal Bediening: Pneumatische bediening met mechanische zelfvergrendeling Ledpfxsxl Hxus Agzehc Positioneringsnauwkeurigheid: ≤ 0,005 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Lodpfx Agex U Sv Hszshc Geopack Cosmos 2.3 software PH 10 probe head TP 200 Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.