Used Minarcmig Evo 170 for sale (7,139)

Condition: reconditioned (used), total length: 2,650 mm, total width: 2,760 mm, total height: 7,510 mm, Modernized machine with new LTG-StoreControl LL control system External dimensions: Height 7510 mm Width 2760 mm Depth 2650 mm 40 beams, each with a payload of 170 kg with clear usable dimensions: W = 2448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 9,000 kg Start of the service opening 900 mm above the top floor, then 750 mm high Color: GRAY/GRAY, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Itjdpfx Aedpd Sceffer Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Bongard deck oven Orion (electric), type 602/4.160 (approx. 8 m²), year of manufacture end of 2021, has only been used for approx. 3.5 years, incl. loader / loading table (manually height-adjustable, for left and right), 4 decks 120 x 160 cm, each with approx. 18 cm interior height or approx. 23 cm for the top oven, with Bongard "Intuitive" computer control of the current design. Electrical connected load: approx. 52 kW / 100 A 380 / 400 V. Including steam function for excellent baking results. Dimensions: Outside: approx. 188 cm width + 2 x 10 cm for loader (left and right), depth: approx. 265 cm, height: approx. 225 cm + 35 cm for steam fan, total weight: approx. 2.5 tonnes Space under loader in top position: approx. 190 to 215 cm The oven was professionally installed and commissioned by the local authorised dealer at the end of 2021. Sufficient space and a large door opening of approx. 190 x 220 cm are available for dismantling. This can be reached at ground level by van / lorry. Itsdjxzr Duopfx Affjr The loader and the outer panelling including insulation must be removed during dismantling, the oven core can remain in one piece. In any case, the stove should be carefully dismantled by a specialist and the dismantling should also be documented by labelling, photos, etc., ideally by the person who will later reassemble and commission the oven. This must be organised by the buyer. The original documents, drawings etc. are available. We will be happy to send you technical data sheets and further photos. The new price was over 60,000 EUR net.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. Isdpfjw Nyt Iox Affjtr The machine is fully operational and can be inspected during operation.

Condition: good (used), functionality: fully functional, power: 97.6 kW (132.70 HP), fuel type: diesel, overall weight: 38,730 kg, Year of construction: 2023, operating hours: 1,050 h, Mobile 3-deck screening plant | 4 fractions | Oversize discharge to the left Year of manufacture: 2023 Operating hours diesel engine: approx. 1,050h Theoretical feed capacity: up to 500 t/h Feed hopper 8 m³ with folding grate Dosing gate at feed hopper Foldable/bar grate MSW100 (radio-controlled) Feed conveyor GB= 1,200mm, smooth belt Screen box with spacer frame Currently without screen media Screen equipment available according to requirements for an additional charge Screening area upper deck: 6,100×1,550mm, cross-tensioned Screening area middle deck: 6,100x1,550mm, cross-tensioned Screening area lower deck: 5,400×1,550mm, length-tensioned Screen inclination: 20-30° Vibration amplitude adjustable: 6 – 10 mm (depending on frequency) 3 material brakes on the upper deck Fine material conveyor discharge height: up to 4,500mm (depending on screen angle) Oversize side discharge conveyor (upper deck, left): discharge height 5,000mm Middle deck side discharge conveyor (right): discharge height 5,000mm Lower deck overflow side discharge conveyor (left): discharge height 5,000mm Radio remote control for folding grate Line coupling Pneumatically assisted scraper on fine material conveyor Dust suppression system with water pump Stockpile monitoring via ultrasonic sensor Hardwired control panel for plant operation Lighting mast with 3xLED Itedpsxqf Ulsfx Affsr John Deere diesel engine 4045 EWS with Stage V turbocharger Power: 97.6 kW Service at 1,000 operating hours = new WITOS Fleetview Transport dimensions (LxWxH): 18,310×3,200×3,400mm Machine weight: 38,730 kg

Condition: new, bending length: 1600sheet thickness: 8upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 1.650,-- Isdpsd Ab Nqsfx Affotr - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!

Condition: used, mileage: 126,022 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 09/2020, CO₂ emissions: 214 g/km, emission class: euro6, color: grey, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fog lights, immobilizer system, navigation system, parking sensors, power assisted steering, seat heater, sliding door, = Additional Options and Features = - Android Auto - Apple CarPlay - Front electric windows - Electrically adjustable exterior mirrors - Euro 6 emissions standard - Driver airbag - Remote central locking - Wooden loading platform - Wooden interior panelling - Height-adjustable driver’s seat - Height-adjustable steering wheel - Height-adjustable front seats - LED daytime running lights - Centre armrest - Multifunction steering wheel - Front and rear fog lamps - Front and rear parking sensors - Radio with DAB+ - Reversing camera - Left-hand sliding side door - Driver’s seat heating - Start/stop system - Immobiliser - Bluetooth telephone connectivity - Heated windscreen = Further Information = Iedpfsxzh Sbox Affetr General Information Number of doors: 2 Model year: 2025 Cabin type: single cab Technical Information Number of cylinders: 4 Engine capacity: 1,995 cc Transmission: 6-speed manual gearbox Dimensions Length/height: L3H2 Weights Unladen weight: 2,226 kg Payload: 914 kg Gross vehicle weight: 3,140 kg Interior Interior colour: black Consumption Average fuel consumption: 6.8 l/100km Maintenance, History, and Condition Service booklets: Available APK (General Inspection): Valid until 09/2026 Number of keys: 2 (2 remote transmitters) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, machine/vehicle number: 8044, Year of construction: 2017, operating hours: 13,250 h, load capacity: 3,000 kg, lifting height: 5,950 mm, free lift: 1,820 mm, fuel type: gas, mast type: triplex, construction height: 2,650 mm, .: 8044 Device details: Year of manufacture: 2017 Load capacity: 3000 kg Lifting height: 5950 mm Operating hours read: 13250 h Free lift: 1820 mm Mast type: Triplex Mast height: 2650 mm Length/width/height: 2740 / 1340 / 2210 mm Operating weight: 4760 kg Itsdpfx Afetw Axisfor ---- Equipment: * Protective roof * 3rd valve * 4th valve * Half cabin * Full free lift * Heating * Front work lights * Rear work lights * Non-marking tires ---- Further device information: ---- The operating hours are generally hours read. We would be happy to offer you the right transport. Another 250 - 300 forklifts, attachments and sweepers available for you immediately. Also available for rent, of course! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Prior sale and errors in this offer are expressly reserved. In the dealer's shop, the device is sold in its current condition, not refurbished. All information is provided without guarantee, errors and changes reserved.

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 1754, Arjes Impaktor 250 EVO II with a set of paddle shafts - ONLY 200 OPERATING HOURS!!! Discharge height: approx. 3300 mm Belt width: approx. 800 mm Hopper capacity: 2.25 m³ Shaft length: 1500 mm Weight without options: approx. 13.5 t Details: Drive - Volvo Penta diesel engine ---> 129 kW Crawler chassis Hook lift Shredding unit: Paddle shafts for wood, plastic, commercial waste, etc. Tool shaft length approx. 1500 mm Shredding unit open Fixed hopper Remote control Colour RAL 2004 - 7015 ---> orange-grey Water spray system Optional: Used concrete shafts Itodpfx Afsxzcizefor THE MACHINE HAS BEEN USED EXCLUSIVELY FOR PAPER PROCESSING!!!

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01165, Year of construction: 2020, operating hours: 13,652 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,800 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386X01165 Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery type: PzS Isdpfx Asxy Tr Rsffetr Battery year: 2020 Battery condition: 60 - 80% Description: Workshop inspected with UVV approval Clamp fork, sideshift, fork positioner Attachment with shorter/longer forks can be configured as needed 3rd valve, 4th valve, rear work light, front work light, roof cover, CE certificate Front & rear work lights, BlueSpot rear, side safety bars

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,593 h, load capacity: 2,000 kg, lifting height: 4,150 mm, free lift: 1,389 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Ijdpfx Afexy Tp Asfstr Transmission: Single-pedal control Condition: Ready for operation and fully functional Technical Condition: Good Front Tires Type: Superelastic Front Tires Size: 200/50-10 Front Tires Condition: New Rear Tires Type: Superelastic Rear Tires Size: 16x6-8 Rear Tires Condition: New Battery Voltage: 48V Battery Capacity: 750 Ah Battery Manufacturer: Hawker Battery Type: PzS Battery Year: 2022 Battery Condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection logbook. For further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide leasing & financing offers as well as affordable delivery options. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Displayed operating hours are as of listing date. Subject to prior sale, changes, and errors. Clamp Fork, Side Shifter, Durwen Clamp Fork, 3rd valve, 4th valve, rear work lights, front work lights, half cab, safety light, single-pedal.

Condition: new, bending length: 3100sheet thickness: 4upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 1.650,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- Itjdpfx Afsd Ab Nmsfor We have many references!

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Itedpfxjuv Euds Affer Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1998, condition: used, Max. saw blade diameter: 420 mm Iodpfx Afsxwylxjfotr Cutting height: 170 mm Miter range swivel with digital display: 45°-90°-25° Miter angle tilt with digital display: 90°-45° Hydraulic forward brake Pneumatic material clamps Saw blade spraying device Hand crank for tilting

Condition: used, Year of construction: 1990, functionality: fully functional, cutting height (max.): 170 mm, rotational speed (min.): 2,800 rpm, power: 2 kW (2.72 HP), pivoting range: 45 °, Equipment: double-sided, Graule ZS170N Itodjxy Nrtepfx Affor Used condition, including base, 2x2m roller conveyors, and stops. Without saw blade. Hydraulic return brake should be serviced. VAT can be shown separately.

Condition: used, functionality: fully functional, Year of construction: 1987, load capacity: 20,000 kg, fuel type: diesel, construction height: 2,960 mm, total length: 5,000 mm, drive type: Diesel, tractive force with load: 20,000 N, construction width: 2,450 mm, Terminal tractor Condition: Ready for use and fully functional Technical condition: very good Front tires type: Pneumatic Front tires Size: 12-22 5 Iodpju Dzucsfx Affetr Rear tires Type: Air Rear tires size: 12-22 5 Description: In addition to this Terberg model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this 170-20 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Heating,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,404 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Single-pedal control Condition: Refurbished, sold without warranty Technical Condition: Good Front Tyre Type: Superelastic Front Tyre Size: 200/50-10 Front Tyre Condition: New Rear Tyre Type: Superelastic Rear Tyre Size: 16x6-8 Rear Tyre Condition: New Battery Voltage: 48V Battery Capacity: 930Ah Battery Manufacturer: GNB Itsdpfx Afsxy Auhofor Battery Type: PzS Battery Year: 2019 Battery Condition: 60–80% Description: Delivery with new FEM 4.004 inspection including inspection booklet. If you have further questions, feel free to call us. Besides this model, we have approximately 150 other industrial trucks in stock. Visit our homepage at fleischmann-foerdertechnik. We are happy to offer leasing and financing as well as delivery on favorable terms. We also accept trade-ins of Linde equipment, regardless of whether you purchase another unit from us. The stated operating hours were read at the time of posting. Subject to prior sale, changes, and errors. Sideshift, Integrated sideshift, 4 valves to the fork carriage, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windscreen, safety light, single-pedal operation, seat heating,

Condition: new, bending length: 2100sheet thickness: 6upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 1.650,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- Ijdpfx Aod Ab Npeffstr - Profile rolls EURO 1.190,-- We have many references!

Condition: used, Zeiss Type: EVO 50 XVP The instruments of the EVO product family combine powerful scanning electron microscopy with an intuitive operating concept that is equally well suited to experienced users and novices. Thanks to its extensive options, EVO can be precisely tailored to your requirements, regardless of whether you work in the life sciences or materials science or in routine industrial quality control and failure analysis. Scanning electron microscope EVO 50 XVP, EDX from Oxford Xplore 30 SDD detector without N cooling 05/2021 Isdpfx Afovvtnbofstr Dimensions: DxLxH 930 x 1930 x 1600 mm 30mm 2 sensor size / resolution 129MnKa at 100,000cps From boron - califonium Software AZtec lite on Windows 10 With drift correction Analyser quali-quanti-analysis Point ID Mapping Line scan Damping system included each container carries 116kg/bar Operating hours approx. 11,500 hours PC upgrade to Windows 10 05/2021 The scanning electron microscope is fully functional. Weight 750 kg + 385 kg +150 kg Condition: used (Changes and errors in the technical data, information are reserved!) Please ask about the transport options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2024, operating hours: 100 h, Automatic wooden pallet production line. Manufacturer - STORTI  Year - 2024 Capacity - 4-5 pallets/min. Isdpfjxwl Daex Affjtr The pallet legs (logs) are fed automatically on a chain conveyor belt, then the upper elements are positioned in the molds by the operator. It moves to the first nailing machine where the upper part of the pallet is assembled. It is automatically rotated 180 degrees and prepared for the assembly of the lower part of the pallet in the second nailing machine. The corner chamfering, longitudinal milling and stamping of the pallet are then automatically performed. The newly formed pallet enters the automatic stacking installation with 90 degree rotation and turning function. NOTE : Line is instaled in 2025 and make 100 hours !   New line just put into operation!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 20 h, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Ijdpfx Ajxwmb Hoffstr Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 76,000 h, functionality: fully functional, Equipment: documentation/manual, The machine is powered and can be inspected and tested by appointment. Iedpfx Aexyp Sajffstr A current video is available upon request. Location: Neu-Ulm

Condition: used, mileage: 96,945 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 06/2018, fuel tank capacity: 80 l, CO₂ emissions: 187 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking sensors, sliding door, trailer coupling, = Additional Options and Equipment = - Rear parking sensors - Right-hand side sliding door - Heated exterior mirrors - Passenger airbag - Bluetooth hands-free kit - Roof rack - Front electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Rear doors - Wooden cargo floor - Height-adjustable steering wheel - Front center armrest - Multimedia compatible - Radio/CD player - Radio with MP3 support - Reversing camera - Front side airbags - Immobilizer - Partition wall = Further Information = Availability Reserved: This vehicle is reserved for a customer (sold subject to confirmation). General Information Number of doors: 5 Model range: July 2016 – Oct. 2019 Cab type: standard Technical Information Torque: 380 Nm Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: 6-speed automatic Maximum speed: 160 km/h Dimensions Length/Height: L2H2 Dimensions (L x W x H): 555 x 207 x 250 cm Weights Unladen weight: 1,918 kg Payload: 1,582 kg Gross vehicle weight (GVW): 3,500 kg Interior Interior: black Consumption Average fuel consumption: 7.2 l/100km Urban fuel consumption: 7.8 l/100km Extra-urban fuel consumption: 6.9 l/100km Maintenance, History and Condition Logbooks: Available APK (Technical Inspection): valid until 12/2026 Isdpfx Afswixkajfetr Number of keys: 2 (2 remote fobs) Financial Information VAT/Margin: VAT deductible Product Safety Manufacturer: Oostland Automobielen Wasaweg 22, 9723JD GRONINGEN, NL

Condition: new, bending length: 2600sheet thickness: 5upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Itjdpfjd Ab Nnsx Affer Options: - Lower roll powered by electric motor EURO 1.650,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U Isdpfx Afew S T Rlofjtr - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), mileage: 176,925 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,950 mm, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 3,210 mm, loading space width: 2,150 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, power assisted steering, soot filter, traction control, trailer coupling, General information Number of doors: 4 Cab: double Registration number: M55846 Technical information Number of cylinders: 4 Engine capacity: 1.995 cc Drivetrain AdBlue system: Yes Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 2450 kg; Tyre profile left inner: 80%; Tyre profile left outer: 40%; Tyre profile right outer: 80%; Tyre profile right outer: 40% Measures Dimensions (LxBxH): 659 x 220 x 235 cm Weights Empty weight: 2.541 kg Carrying capacity: 959 kg GVW: 3.500 kg Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information VIDEO: Very nice and neat Ford Transit 2.0 TDCI 170 HP Euro 6 B Flat bed van / Pick up DC Double cabin 6 seats 176000 km Fully dealer maintained GVW 3500 KG / Driving license B Air conditioning / Cruise control / Tow bar Itjdpfovz U Utex Affor Towing weight: 2800 KG Technically and optically in good condition