Used Minarc 150 for sale (9,909)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing Iedjx R N Urepfx Ah Notb and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production Ijdoxvb S Rspfx Ah Nstb – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar Iodpfx Ajya Dfieh Njtb -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle motor power: 15,000 W, spindle speed (max.): 34,000 rpm, number of axes: 5, This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Additional equipment • 2-zone pendulum operation • Angle milling head for bottom-side machining (optional) • Automatic length measurement • Barcode scanner • Label printer • Cycle time monitoring • Tool holders, collets, saw blades, tools included • eluCad (office software package for production optimization) Machine Benefits Technical Machine Benefits • Max. Machining length without profile end machining: 9220 mm • Max. Machining length with profile end machining: 8900 mm • A-axis swivel range: ±110°, freely programmable in 0. 1° steps • C-axis rotation range: ±182°, freely programmable in 0. 1° steps • Max. Milling cutter diameter: 100 mm • Max. Disc milling cutter diameter: 100 mm • Max. Saw blade diameter: 400 mm • Electrical connection: 400 v, 3-phase, 50 hz, 80 a • Compressed air consumption: approx. 200 l/min (with spray mist system) Extra Information All operations (milling, drilling, tapping, slotting, sawing) performed on stationary profile bars Ijdpfsyar Dtox Ah Notb 6-sided machining possible using optional angle head Tool magazine includes standard tools, special tools (e.g., angle milling head), and saw blade Direct-drive motors in all axes for fast positioning with low wear The machine is dismantled and ready for delivery Control Unit Windows-based control system with USB and network ports 3D graphical workpiece visualization Automatic clamp detection and positioning Controller 5-axis control for spatial machining

Condition: used, Year of construction: 1978, pressure 150 t Itodpfx Aovut Ursh Nob stroke fix 80 mm no. of strokes 30 - 150 /min distance between columns 930 mm dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 880x1300 / 1500x600 mm hole in the table 760 x 180 mm table height over floor 1270 mm ram surface 920x1000 / 1300x600 mm Weight 27,5 t dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder as is where is, WITHOUT putting into operation Price for commissioning (with new electric control) on request

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Itedjuddglopfx Ah Nob Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t Itodevxa Tpjpfx Ah Neb YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: ready for operation (used), Year of construction: 1996, controller manufacturer: FANUC, controller model: na, number of axes: 2, This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Distance between centers: 180–500 mm • Turning diameter: 150 mm • Swing over saddle: 430 mm Extra Information Machine still under power Iodpfx Asyalmzeh Netb

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Clamping force: 800 kn • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 Iedpfxjyaizpj Ah Njtb • Configuration: vertical

Condition: good (used), mileage: 98,160 km, power: 110 kW (149.56 HP), first registration: 08/2018, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 4,900 mm, total width: 1,900 mm, total height: 1,960 mm, loading space length: 2,450 mm, loading space width: 1,570 mm, loading space height: 1,310 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - None - Alloy wheels - Partition wall = Notes = Configuration: 4x2, Payload: 955 kg, Curb weight: 1845 kg, Gross weight: 2800 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (central axis): 2500 kg, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking sensors: Front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine output: 110 kW (148 HP), Fuel type: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Seats: 2, Seating arrangement: 1+1, Upholstery: Fabric, Seat adjustment: Manual, L1H1, DSG AUTO., EDITION version, air conditioning, parking sensors, alloy wheels, 98,000 km, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 Registration number: V-730-RR Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil springs Axle 1: Tire tread left: 7 mm; Tire tread right: 7 mm Axle 2: Tire tread left: 7 mm; Tire tread right: 7 mm Weights Unladen weight: 1,845 kg Payload: 955 kg Gross vehicle weight: 2,800 kg Functional Loading floor height: 55 cm Maintenance APK (Roadworthiness inspection): valid until 09/2026 Condition Technical condition: good Optical condition: good Damages: none Itjdpfxeyagr Sj Ah Nob Number of keys: 2 Financial Information Lease price: €309 per month (panel van, 72 months); Please ask for further information and terms.

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Itjdpfx Ajmpfwdoh Nsb Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Year of construction: 2021, condition: like new (used), As-new deburring and grinding machine Itsdpfxsyabrae Ah Njb Model: VKUE 150 Capacity: 150 liters Incl. grinding stone Year of manufacture: 2021 Incl. water filtration system

Year of construction: 2018, condition: good (used), Mould turner 10Ton Iedpjw Dtp Hofx Ah Netb Year : 2018

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Isdpfx Aowf D R Roh Njtb If you would like further details or a quote, please contact us.

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us. Itsdpowf D S Uefx Ah Nob

Year of construction: 2000, condition: used, ampere 29,5 protection P 31 fabric-no. 812122 Itedevu Hk Hopfx Ah Neb frequency 50 Hz weight 300 kg

Condition: used, Year of construction: 2012, fuel type: electric, Weights Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.515 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 785 m Max swing of platform in degrees: 175 Transport dimensions (LxWxH): 6,03x1,52x1,97 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Manitou Itsdjx Uwqvjpfx Ah Neb Model: 150 AETJC Year of build: 2012 Condition: Used Data: Max. working height: 15,15 m Max. platform height: 13,15 m Max. reach: 7,85 m Drive type: Batterie Total dimensions LxWxH: 6,03 x 1,52 x 1,97 m Length of transport position: 5,06 m Height transport position: 2,38 m Platform dimensions LxW: 1,21 x 0,95 m Max. basket load: 200 kg Swivel range: +/- 175° Overhang: 0,14 m Movable up to working height: 15,15 m Gradeability: 23% Wheel pressure max.: 36kN Ground clearance: 0,12 m Empty weight: 6.700 kg Special features: Rotating work platform, basket arm/vertical rotation angle +/- 70°, white tires, advantage: total height under 2 meters. Location: 41468 Neuss immediately available

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Motor power: 11 kW Stroke: 300 mm Clear distance between columns: 1,570 mm Itjdpfx Asd Ab Ndsh Nsb Piston Ø: 280 x 200 mm Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Weight: 2,100 kg

Condition: good (used), functionality: fully functional, “3 Pcs. Steinert NES 150 220 E 5009” for Sale Manufacturer: Steinert Type: NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) With new of good used Control-unit. Overhauled, sandblasted and painted. Isdpfou S Sbyjx Ah Netb

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm manual feed spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg Iodpfx Ahsihpl Rs Njtb

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Screw diameter: 25 mm Distance between tie bars V: 270 mm Ijdpfx Ahexl Hpgs Nstb Distance between tie bars H: 270 mm Type: Horizontal Drive: Hydraulic

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, LBK.150 LBK-150 LBK004 Worktable extension LBK005 Motor with 2 speeds 700/1400 rpm LBK008 Base for mounting feed unit Itsdeya H Nqjpfx Ah Neb

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) Iedpfxovf Dtyj Ah Nstb - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Iodpsxxrr Tjfx Ah Notb Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets Iodpjvcb U Ajfx Ah Notb -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven