Used Mh 700 for sale (14,457)

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, mobile workbench -Mobile workbench: solid design -Width: 1500mm -Depth: 700 mm -Height: 840mm -Base: 4 swivel castors -Weight: 145 kg Prjdpfx Ajud Uugsdned

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm Psdpfxsxgwbpj Adnjrd This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter Prjdovy Ig Hepfx Adnsd DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Condition: used, Year of construction: 2007, Turning length 700 mm Max. turning dia. 460 mm Spindle speeds 4000 rpm X/Z travel 260/795 mm Turret w/12 stations Control: MSX-850 III Pedpfxsxdhxts Adnjrd Equipped with: Various tool holders

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Prsdpfxsim S Hqo Adnod Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: new, 6 St. 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Prjdow U U Rfopfx Adnjd Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheel -Solid rubber tires: with rim 2 pieces -Tire size: 21x7x15" / (534x178x381) -Rim: Type MH -Hub: cone Ø 68-74 mm -Hole circle: Ø120 mm M8 / Ø300 x 11 mm -Sprocket: Dimensions see photos / technical drawing -Price/Delivery: complete -Dimensions each: Ø 534 x 205 mm Prjdpsxd Ttcofx Adned -Weight: 91 kg/piece

Year of construction: 2022, condition: ready for operation (used), Main Drive Number of spindles 1 Spindle speed range 4000 This DMG MORI NLX 2500 Y / 700 was manufactured in 2022. A robust horizontal turning machine, with Y axis and live tooling, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500 Y / 700 horizontal turning machine. Contact us for more information. Pedpfx Aoxb E H Asdnsrd Application Types Turning

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm Prsdpju Hq Rlefx Adnsd max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor Pedpfx Adow Uqmpsnord outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: good (used), Diameter: 630 mm Inner diameter: 135 mm Rear mount: 110 mm Pjdpfxsbptn Ao Adnerd Mounting: 4 Allen screws pitch circle 220 mm

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Pjdpfxew El Nhs Adnsrd

Condition: good (used), workbench, work table, assembly bench, assembly table, work table Prjdpfx Adexbyzhjned -Workbench: with drawers, solid construction -Width: 3000 mm -Depth: 700 mm -Height: 900 mm -Drawers/cabinet doors: 2x each, lockable / without lock/key, see photos -Weight: 206 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Psdpfx Ajxamqmodnerd Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification Prsdev U Dn Nspfx Adnod General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm Prodpfx Ast Hf T Hsdnsd weight ~10 t

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Prjdpfowxwiaex Adned

Condition: excellent (used), Year of construction: 2009, operating hours: 61,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 45 mm, clearance between the columns: 560,510 mm, column diameter: 90 mm, injection pressure: 2,106 bar, injection weight: 325 g, mold height (min.): 200 mm, ejector force: 42 N, ejector stroke: 190 mm, overall weight: 9,000 kg, Press currently in production. Excellent for packaging. With inverter. Prsdpfxeww En Io Adnod

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm Predpfx Asw Dccvodned -Weight: 207 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm Prodewqc T Uspfx Adnsd - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: new, Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Psdpfx Ajd Av Dmednsrd Dust port diameter 2 x 100mm

Condition: like new (used), Year of construction: 2021, General parameters: Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Intended use: Industrial edge processing with high precision Key features: Automation of basic functions for easy operation by one person Massive frame construction for high stability Electronically adjustable upper pressure path Two-band pressure belt for safe guidance of short parts IMA quick glue change system Program-controlled feed speed Multi-profile technology possible with automatic profile change Touch control via 21.5" industrial PC Technical parameters: Part thickness: 8–60 mm Pedpfjv D Rhuex Adnerd Minimum part length: 150 mm Minimum part width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Strip thickness: 0.3–3 mm Working speed: 20 m/min Machine equipment: Pre-milling unit with diamond tools Cutting unit with automatic tilting (15° inclination) Milling and copying units with automatic adjustment Edging system with PUR glue option Upper and lower spray system for cleaning and maintenance of the part Rounding and polishing units for final edge treatment ICOS open control system with touch screen

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design -8 drawers: division/height see photos -lockable: without key -Dimensions: W 525/700/H 850 mm Pedpfx Adswxti Njnsrd -Weight: 110 kg

Condition: used, Workbench, work table, assembly bench -Workbench: with drawers/cabinet door, solid design -Width: 1240mm -Depth: 700mm -Height: 850mm Prodpfxjrg Iu Ej Adnjd -Drawers: 3 -Cabinet door: 1 -Weight: 102 kg

Condition: used, cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm Prjdpfxoux Sb Ae Adnod -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg