Used Metal Working Machine for sale (90,420)

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: Knodpfxoxuu Dks Ag Ajd 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw Knsdpfjgmi U Dox Ag Aod dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: not inspected (used), 41 Series WRD untested, available at a low price. Kedpfoxwbb Usx Ag Asnd

Condition: used, AUTOMATIC SHEET METAL BLANKING AND BENDING LINE – USED – CE CERTIFIED Brand: CIMSA – Made in Italy Material Specifications • Material: Fe P01 – galvanized – pre-painted • Thickness: 0.6 – 2 mm • Maximum dimensions: 1000 x 2000 mm Line Dimensions Kodpexv Th Rjfx Ag Aend • Total length: 25 meters + robot • Maximum width: 6.8 meters Line Composition • Motorized decoiler model SMC 100 • Straightening unit model CR 1000 • Electronic feeder model AP3 1000 • Punching unit consisting of 13 cylinders and 18 punching groups controlled by CNC • Tool change device • Press 60 tons, width 1000 mm, 50 kW, complete with: - die insertion trolley - sheet metal support - scrap evacuation conveyor belt • Blade change system on the shearing station • Platform with piece translation and tilting system • Transfer station adjustable in width by handwheel • Flipping device for piece turnover • Longitudinal positive/negative bending station • End positive/negative bending station Automation: ABB robot for automatic piece unloading

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 54 h, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, overall weight: 3,550 kg, Hydraulic shear for longitudinal and cross cutting of sheet metal for sale. Suitable for sheets up to 0.8mm thick and up to 1250mm wide. Digital control – numerical definition of cutting length and number of pieces. The machine is as new! Kodoxv Sfhepfx Ag Asnd

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: Knedpfx Agow Dp Eks Aod * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ksdpsv Hnpzofx Ag Asnd Ultra-Large Format Single-Platform Sheet Cutting Machine Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system

Condition: new, Fully automatic roof tile machines with metal presses in tile appearance in desired sizes; Please contact us for additional information and technical documents. Kedpef Nqi Ijfx Ag Aond

Year of construction: 2024, operating hours: 150 h, condition: ready for operation (used), This Crippa BASIC 42.1 was manufactured in 2024. It is a robust tube bending machine capable of handling steel tubes up to 40x1.5 mm and aluminum, copper, or other tubes up to 42x2.5 mm. It features a maximum bending radius of 170 mm and can accommodate tube lengths up to 4650 mm. Consider the opportunity to buy this Crippa BASIC 42.1 tube bending machine. Contact us for more information about this machine. Knjdpfx Agextq U Nj Aod Application Types Other Sheet Metal Machinery

Condition: new, Year of construction: 2024, functionality: fully functional, coil width: 1,250 mm, Material width 1250 mm Coil weight 5 t Material thickness 0.5 – 1.5 mm Coil inner diameter 490 - 560 mm Kjdpfswur Ebex Ag Aend Number of feed rollers 3

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Knjdpfx Agew Ed Uvj Asd Conveyor Feed Unit Conveyor motor power: 0.75 kW - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Kjdpfxsrkl Uns Ag Asnd Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: reconditioned (used), Year of construction: 2015, operating hours: 2,900 h, functionality: fully functional, working width: 1,350 mm, working height: 160 mm, Great deburring machine/surface finisher for dry finishing and one-side processing. Units: C25 + XRS-130 + C25 Working width: 1350 mm Belt length: 2620 mm Material thickness: 0.8 - 160 mm Unit description: - C25: Top sanding belt unit with roller diameter 250 mm - XRS-130: Orbital brush unit, brush diameter 130 mm - C25: Second top sanding belt unit with roller diameter 250 mm - SB-18: External Scotch Brite brush at machine exit (3 kW, diameter 180 mm) for surface finishing Controlled via PLC-Vision B control panel. The machine is in good condition, with low operational hours (only 2,900 hours total), and is supplied with full documentation. Machine is sold complete with dust extraction unit and spare parts (belts). The machine has been inspected and refurbished by an authorized Costa service partner. Knedpfx Agexvb Tue Aed Approximate weight: 4,800 kg.

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Knsdpfx Agjudb R Is Aed Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: used, Year of construction: 1986, working width 50 mm Knjdpfevn Al Tjx Ag Aod wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: - round: 255 mm Kedpfexup Ttex Ag Aend - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Year of construction: 2025, condition: new, functionality: fully functional, 3 & 4 Edge Sheet Metal Cleaning Machine Model: CBP-3 Single-person operation Stainless steel, mobile design Maximum sheet size: up to 600 x 800 mm Extendable collection tray underneath Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of this tray/sheet cleaner is also evident in its ability to process 4-edge trays with edge heights of up to 24 mm. Contaminants collect under the cleaner on a pull-out, easy-to-empty tray. The unit is fully mobile and can be effortlessly moved to any desired location after work. The entire construction is shot-blasted, ensuring the smoothest and most hygienic possible surfaces. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand new equipment With warranty + spare parts service Quality from a specialized workshop! Benefit from over 35 years of experience! Options: • Sheet cleaning up to 600 x 1000 mm Knedpfx Agow S Slnj Aed • Greasing/oiling for sheets • Service package • Delivery service • Commissioning & instruction Visit us!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: CYBELEC, controller model: CYBTOUCH 15 2D, working width: 3,100 mm, throat depth: 450 mm, number of axes: 4, type of crowning: CNC-controlled, overall weight: 7,600 kg, total length: 4,360 mm, total width: 2,760 mm, total height: 1,745 mm, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Hydraulic Press Brake / HYBRID COMFORT PLUS 135T 3m: Pressing force: 135T Bending length: 3,100 mm Distance between uprights: 2,600 mm Stroke: 265 mm Ksdpfx Agoxukbro Asnd Throat depth: 450 mm Maximum opening: 470 mm Ram height: 925 mm Descent speed: 190 mm/s Return speed: 140 mm/s Working speed: 10 m/s Machine dimensions: 4,360 x 1,745 x 2,760 mm Weight: 7,600 kg Motor power: 11 kW Standard features: 4-axis (Y1, Y2, X, R) motorized backgauge for precise and fast positioning Cybelec CYBTTOUCH 15 2D CNC controller Monoblock welded steel frame ensures rigidity and durability Promecam quick-release tool clamping system for tool changes without downtime High-precision linear guides for consistently accurate bending FIESSLER AKAS front and rear laser safety system for safe operation Integrated standard tooling: 85° punch and Multi-V die along the full length LED lighting for optimal visual comfort Premium European hydraulic components by Höerbiger Motorized crowning for consistent bending across the entire length Two front sheet supports included Available options: High-precision hydraulic crowning Pneumatic or hydraulic tool clamping systems (compatible with your existing tooling) Motorized bending aids for easy handling of long or heavy parts Extended rear backgauge for oversized workpieces Rear backgauge with up to 6 or 8 axes for increased flexibility Wide lower table suitable for multi-V tooling Additional fingers for rear backgauge Offline programming interface for job preparation from a PC Full robotic automation for bending processes to maximize productivity Machine manufactured in Turkey. The machine can be viewed and tested by appointment at our facility in Bréal-sous-Montfort (35). We can also provide demonstration videos or organize a live video presentation to show the machine in operation. Feel free to contact us for any additional information. Price on request. Delivery, unloading, and commissioning available on request.

Year of construction: 1980, condition: good (used), functionality: fully functional, Guillotine machine sheet metal thickness - max 2mm lenght max. 1600mm Year of production 1980 Kjdpfx Astz T Tdjg Aond weight 1500 kg machine ready to work in good condition

Condition: new, Sheet metal deburring machine similar to Timesaver Kjdpfx Aext Dvysg Aend

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) Kjdpfxsu Ng Hbj Ag Aond version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever *

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm. Knsdpjwb E Uvsfx Ag Asd

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Knsdpfxsrxt Axo Ag Aod Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Knodpfxjrxt Hqj Ag Aod Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale Kodpfxowbhtns Ag Aend With Spare Belts Ideal for sheet metal boxes