Used Metal Cutting Saw for sale (41,897)

Condition: new, Bernardo Manual Metal Cut-off Saw CS 315 H Technical Specifications Saw blade diameter 315 x 40 mm Speed 19 / 38 RPM Maximum clamping capacity (open) 150 mm Working height 920 mm Motor output S1 100% 0.75 / 1.5 kW Motor input S6 40% 1.0 / 2.1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight approx. 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Pipe, round 90°: 80 mm 45°: 70 mm Profile, square 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Profile, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head for slotting, swivels 90° to the left and right Removable coolant tank integrated in the robust base frame Gearbox with hardened and ground worm shaft and bronze worm gear Safety guard opens automatically during cutting Fpsdod Id Ugjpfx Ah Ejp Precise, 4-way guided, self-centering double clamping vice Ergonomically shaped handle with push-button for fatigue-free sawing Low saw blade speed (19 / 38 RPM) ideal for cutting solid materials Reduction gearbox runs quietly in an oil bath Scope of supply Coolant system with filter Self-centering vice Base frame

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: Fjdpfxeyfnpij Ah Espp • 1st gear: 11 m/min • 2nd gear: 22 m/min

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Fpsdpsz R Uvxsfx Ah Ejp 350 mm, with numerous frame saws and grinding machines.

Condition: ready for operation (used), Year of construction: 2012, BANDSAW TEBA 310 -CE marking -Year of manufacture 2012 Fpedpfoz Di Sljx Ah Esp -Maximum cutting capacity 310 mm -Conventional / Semi-automatic -Miter cutting device -Coolant system -Cutting speed / Infinitely adjustable -Total power 3 kW -Saw blade dimensions 3990x27x0.9 mm -Approx. 20 spare saw blades Dimensions: L x W x H 1.7 x 1.2 x 1.9 meters / Weight approx. 1100 kg Errors and omissions excepted.

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and marking defects (using fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm Fpedpfx Aezryupjh Ejp - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 1 pneumatic ejector - Control system: OptiCom Pro

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1966, Wagner metal band saw - Control unit with analog counter - Band length 5,000 mm - Front-mounted guide rollers - Semi-automatic tensioning device Fpedpfx Ahe Adz E Rs Ejp - Chip conveyor

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008 Fsdpfx Ahszwhdpe Ejpp

Condition: ready for operation (used), Mössner Rekord SSF/1050 Vertical Bandsaw, Metal Bandsaw Roller diameter Ø: 500mm Fpsdpfx Ahoz E Hpws Esp Overhang: 1050 / 485mm Workpiece height: 300mm Cutting speed: 15-940m/min Bandsaw blade length: 3920-4050mm Dimensions: approx. 2100mm x 1000mm x 2100mm (L x W x H) Weight: approx. 1800 kg Welding machine: Ideal You are welcome to come by for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm Fpodpfxoztzc Ds Ah Eop - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8151 Technical specifications: - max. blade diameter 800mm - spindle diameter 30mm - hydraulic clamping system also functions as a blade guard - hydraulic blade stroke - max. cutting width 700mm - max. cutting height (at the center) 250mm - max. cutting height (full width) 150mm - main motor 11kW - diameter of dust extraction nozzles 2x130mm Fedpfxs Aiubps Ah Eepp - table dimensions 640x1000mm - table height from the base 900mm - roller tables 2 pcs - roller dimension 590mm table dimensions: - length/width 2040x650mm - length/width 1740x650mm - machine dimensions length/width/height 1200x1000x1430mm - total weight 600kg ADVANTAGES – 2 roller tables – hydraulically adjustable blade – used saw, very good condition Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7065 Fodszulu Tspfx Ah Eepp TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of the sawing unit spacing - min. cutting length at 90° 220mm - max. cutting length at 90° 2820mm - cutting width 110mm - cutting height at 90 degrees 90mm - 2 pneumatic clamping devices - control pedal - material support - main motor 2 × 1.6kW - dimensions (L/W/H) 3620x1100x1250mm - weight approximately 500kg - unpainted - tilting sawing units - used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° Fpjdpfxszqtrfo Ah Esp - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: excellent (used), Catalog number 7807 TECHNICAL DATA - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table dimensions 1900x790mm - height from base to table 830mm - top - 2 rows of pawls/ejectors - 2 smooth, metal feed rollers - saw arbour - 2 feed rollers, pressure rollers - bottom - guide strip - pawls/ejectors - track - electric height adjustment of the machine body - central lubrication - stepless speed adjustment via frequency inverter - feed motor 4kW - main motor 75kW - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 2050x1800x1800mm - weight approximately 3500kg ADVANTAGES - German-made - DTR documentation available - used multi-blade saw - very good condition Net price: 58900 PLN Net price: 13700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Fsdszwwvzopfx Ah Eepp

Condition: good (used), Year of construction: 2009, Panel saw or solid wood saw with a cutting height of up to 170 mm. Fpjdpfsz Ic Saox Ah Ejp Maximum cutting width: 2010 mm.

Condition: used, Metal band saw Hans Schreiner MBS270FH, very good condition, 1.5 kW, 260 mm cutting length, 140 mm cutting length, 227 kg Fsdpfxex H Ui Ts Ah Espp Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of Fsdpezrmk Rsfx Ah Espp hydraulic lifting of the saw frame.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm Fpsdpjy R Ablsfx Ah Eep - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Type: WJ2010-1Z-SJ-S Fpedpfjz A Aa Hox Ah Esp Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request.

Condition: new, Year of construction: 2026, operating hours: 818 h, machine/vehicle number: S-MD 315, saw blade diameter: 315 mm, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 80 mm, sheet thickness aluminum (max.): 100 mm, total height: 100 mm, cutting range round steel at 45°: 80 mm, cutting height (max.): 315 mm, overall weight: 350 kg, input voltage: 380 V, year of last overhaul: 2026, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 100 mm, cutting diameter: 315 mm, saw blade bore: 32 mm, power: 380 kW (516.66 HP), Equipment: CE marking, PNEUMATIC DOUBLE VISE PROFILE AND METAL CUTTING MACHINE Fedpfxey Aw Sps Ah Eopp

Condition: new, Year of construction: 2026, functionality: fully functional, The semi-automatic circular saw TL-600-A is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its easy operation, quick and convenient material changes, and simple miter angle adjustment. Fjdpfx Ahs Aft Rhs Eopp The TL-600 A has a continuously adjustable miter range to the left and right up to 20° (swivel range of two times 70°). Technical data: • Cutting range: 90° round: 230 mm / square: 200 x 200 mm / rectangular: 500 x 50 mm 45° L/R: round: 230 mm / square: 160 x 160 mm / rectangular: 250 x 100 mm • Drive power 4.1 KW / 400 V / 50 Hz • Speed 3000 RPM • Cutting speed 55 m/sec • Blade dimensions 600 x 50 mm • Working height 970 mm • Max. cutting height 230 mm • Dimensions 1300 x 1220 x 1635 mm • Weight 500 kg Equipment: • Double miter 20° – 90° – 20°, large support plate, powerful drive motor • Two-button control for initiating the sawing cut (optionally also available as a single-button control) • Clear control panel • Adjustable blade/cutting feed • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic lifting of the saw blade, with oil level indicator • Fixed material support can be moved to the rear to increase cutting performance • Large protective cover, covers the entire work area • Minimal lubrication system with a 2-liter reservoir • Air gun for cleaning the machine • Saw blade ø 600 mm

Condition: used, Year of construction: 2020, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Fsdez Szgfspfx Ah Espp Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° Fpsdpfx Ahoz Ny Ddj Ejp - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Fsdpez It Ewefx Ah Espp Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return.

Condition: good (used), Year of construction: 2004, I sell the automatic pneumatic end cutting saw OMGA T521 OPT 6600, year 2004. Input table automatic feeding 6,60m (pusher system) Outut table 3,00m Total length: 10,50m Fedpfxez Suzpj Ah Ejpp Optimising with automatic cutting sequence modes. Fluorescent chalk sensor reader. Available immediately. CE version. Documentation included.

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm Fjdpfx Ahepgmkye Ejpp round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cutting speed 32/ 66m/min Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted.