Used Metal Cabinets for sale (37,300)

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Blodpeyma Nwsfx Aa Esd Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 8 drawers Blodpfx Ajx Hf Tpja Ejd -Width: 2040 mm -Depth: 780 mm -Height: 2150 mm -Drawers/shelves: See photos for layout/height -Door: lockable, without a lap -Weight: 603 kg

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 Bsdpfeynwx Sox Aa Ejld For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Bsdpfx Aaoynwxxs Eold Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Bledpfx Ajgmhxaoa Ejd Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: excellent (used), functionality: fully functional, working width: 2,040 mm, bending angle (max.): 180 °, sheet thickness (max.): 2 mm, 6-way programmable control 2040 x 2 mm Bledpfx Aeynwiqsa Ejd

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet Bsdpsyl Rxyofx Aa Eeld – 9 drawers – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 350 mm, total length: 1,020 mm, total height: 1,850 mm, total width: 810 mm, overall weight: 371 kg, type of input current: three-phase, rotational speed (min.): 37 rpm, rotational speed (max.): 74 rpm, input voltage: 400 V, IMET Sirio 350 3 Phase 400 Volt 2-speed motor runs flawlessly. Pneumatic vice with double clamping system. 37 & 74 RPM. Miter cuts possible from -45 to +60 degrees. Maximum clamping capacity: 180mm Maximum saw blade diameter: 350mm Current blade diameter: 315mm Coolant pump mounted in the machine base. Emergency stop switch. Splash guard. Bljdpfxeynugaj Aa Eod Made in Italy. Year of manufacture: 1997 Overall dimensions: 102x81x185cm Weight: 371 KG Overall good condition! Contact us for shipping options! € 2,150.00

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS based in Sindelfingen. Device features: RAS Folding Bench Capacity: 2.5mm steel – more for aluminum Bljdpfx Aoxqpiyja Eed Bending length: just over 2 meters Front-adjustable depth stop, also excellent as a sheet support Hand and foot switches The machine comes from a reputable company and was professionally inspected again prior to sale Weight: see picture Optionally, there is also a segmented clamping beam from RAS in stock Invoice with VAT shown separately Shipping by freight forwarder can be arranged if desired Free loading as shown in the pictures Viewing and testing possible by telephone appointment. Payment in cash upon collection – if there’s anything else I can do for you, please give me a call – thank you. Collection should take place within 8 days after the auction ends. Location: 97261 Güntersleben

Condition: used, Safe - Strongroom STRACKE Security level / resistance grade III 1 key lock VDS class 2(B) 1 mechanical code lock 2(B) with reinforced keyhole protection Bjdewki A Aopfx Aa Eeld Internal dimensions: W=650 mm, H=1300 mm, D=445 mm Interior with partition wall and collecting device - Bolt system with 3-way locking - Key lock with one key (2 keys available) - With deposit chute Ø 160 mm - 19 deposit containers made of plastic Ø140 x 270 mm - Operating manual External dimensions: W=790 mm, D=675 mm, H=1440/1800 mm Weight: 1330 kg

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck Bodpfx Aaoiv A U Ee Eeld space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: used, Guillotine Shear LOTZE Type HSS 20 / 7 Machine no.: Year of manufacture: 1957 Cutting length: 2050 mm Cutting thickness: 7 mm Bedpfxelmry Eo Aa Eold Back gauge: 450 mm (adjustment range) Working height: approx. 800 mm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with handwheel adjustment and mechanical position indicator - Gauge adjustment via trapezoidal threaded spindles - Mechanical sheet holder - Simple left angle stop 680 mm - Two front table extensions 650 mm - Mechanical foot switch Space requirement without front table extension (L x W x H): 3040 x 1700 x 1740 mm Space requirement with front table extension (L x W x H): 3040 x 2350 x 1740 mm Weight: approx. 6 t

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel Bledpfx Aaoifu Aye Ejd - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts Bodpfxeif Sg So Aa Eold - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm Bodpfx Aasifu Ano Eeld weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Simple backgauge: 500 mm Blodpfx Aelpkcnja Eod Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Blodpfephvl Tjx Aa Eod Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition Bljdpshwt H Aofx Aa Ejd The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Blodpfsdzqblex Aa Eed Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Blsdpjwkvi Nsfx Aa Esd Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm Bljdpsdzqaaofx Aa Eed bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Bodpfxjquzd Rs Aa Esld Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Fortress Technology Phantom metal detector / Driver Southall DS300 checkweigher combi unit with air-blast reject into lockable bins. Fitted with the following fail-safes - Reject confirmation, Bin-full monitoring and Low-air monitoring. Fortress Phantom serial number - EM1384. Driver Southall serial number - F4330. Date of manufacture - 2012. Metal detector aperture - 350mm W x 200mm H (133mm H useable). Weigh platform - 500mm L x 250mm W Loadcell - 5 kg (up to 3000g maximum weight). Belt dimensions - 3250mm long x 245mm wide. Operating height - 890mm high. Medium frequency - 153 kHz. Overall dimensions - 3250mm long x 1100mm wide x 1930mm high. Bljdeynkpwjpfx Aa Esd Electrical requirements - 230 V / 50-60 hz / 1 phase. Notes - can be fitted with spacing / metering conveyor which measures an additional 400mm long.

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Blsdpfxjynhudj Aa Esd

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3615 102 087, saw blade diameter: 350 mm, New Price KASTO radial U10 good as new Blodpfx Ajvwm Ecsa Eed A lot of new saw blade, (see pictures)