CNC press brake 3200 mm x 125 to

NOVAKRAFT PBS-H 125-3200

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm Hnodpjhzbipjfx Ai Nsk - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2004, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 350 mm max. opening beam/table 620 mm Hnsdpfxexyzzae Ai Njk C-recess 420 mm traveldistance X1+X2 cnc programmable 700 mm Z1+Z2 axes controlled by cnc 0-2000 mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 24000 h length 3380 mm width 1800 mm height 2750 mm weight 6100 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools Hsdpexabnyefx Ai Njnk - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, Spot Welding Machine Type KAP10 CE certified Operated: Pedestal Power at 50% ED 10kVA, Continuous power 7.1kVA Hnsdpfx Aiokwcbyj Nok Welding Capacity: 1.5+1.5mm steel sheet Transformer Construction: -Primary winding: Copper wire -Secondary winding: Copper flexible foil sheet -Core: Silicon steel EI core Mains Connection: 220V/400V (50Hz) Protection Fuse: 220V-40A / 380V-25A Power Level: 5 Arm Length: 500mm Arm Diameter: 40mm Electrodes: Adjustable electrode stroke Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 380mm x 1000mm x 1050mm Weight: 110Kg Warranty: 1 years (+10 years spare parts support)

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment Hnodpfxew T Sc Aj Ai Njk • Support table A good selection of tooling, segmented and full length

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Hsdpfx Aisu U Hm As Njnk Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Hodow Tcncspfx Ai Nenk Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Hnedot Hw Iiopfx Ai Nek total power requirement 45 kW weight of the machine ca. 5.500 kg

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Hsdpfxonqy Hae Ai Nenk

Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control Hedpfehc Uvmex Ai Njnk - Emergency stop - documentation - 400V