Used Mechanical Clamping System for sale (13,721)

Condition: used, length 800 mm Hfodjtv Icujpfx Afijn width 500 mm height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/ea

Year of construction: 1983, condition: used, sheet width 1250 mm plate thickness 3,0 mm distance between columns 900 mm power requirement 2,2 kW dimensions 3,27 x 1,69 x 1,29 m weight of the machine ca. 1,6 t Hfedpfenwr Dtex Afisn used compact mech. guillotine shear - strokes per minute: 50

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Measurements depth 3000 mm Machine weight 95000 kg This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Hodpfsxg Unajx Afiefn Stamping

Condition: used, functionality: fully functional, SCHUNK GFT-X270 Clamping Force Measuring Device & M3 Measuring Head Gripping Force: - Handheld device GFT-X - Power supply via USB, 5V - Measuring range/clamping force F - Display in kN or lbf – switchable, - Graphical bar display in %, where 0....80% green, 80....95% yellow, 95...100% of measuring range in red - Measuring range/rotational speed rpm, display in 1/min (can be switched on/off) - Dimensions 220x100x50mm - Weight 460g - PC/Laptop interface USB 2.0 - Interface/charging cable 1.5m - Measuring head charging cable 1m - Receiving frequency 433.92 MHz - Measuring head M3 - Power supply internal energy storage - Energy storage capacity approx. 1.5 h at 50% duty cycle - Measuring range/clamping force F 0...180kN (2-jaw) / 0...270kN (3-jaw) Hfjdpfx Aow Eb Nqefijn - Measuring range/rotational speed rpm up to

Condition: good (used), total length: 2,000 mm, total width: 1,200 mm, Size: 2000x1200x200mm Hsdpfxour N Sds Afisfn Hole size: 1300x500mm

Year of construction: 2022, condition: excellent (used), Item description: Mechanical vacuum lifter VACULIFT U02-E 270 kg Load capacity: 270 kg Dead weight: 22 kg Minimum load: 10 kg Year of manufacture: 2022 ----- Condition of the item: The item comes from a company liquidation. Hsdpfx Aoxl Enbsfiefn Fully functional. Good condition.

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2495mm -Width: 1500mm -Plate thickness: 40 mm -Plate: with supporting ribs (without straightening blade, not included) -Transport dimension: 2495/1500/H810 mm Hfedpfeikn N Rsx Afijn -Weight:2370 kg

Condition: used, diameter 250 mm Hsdpfx Afot Nzfqeijfn

Condition: excellent (used), Reversing clamp Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Bore 65 mm Hedpein Ef Rofx Afiefn Outer diameter 315 mm Further: Profile rail guide RUE 45 4 centering and clamping units Integrated chip guide

Condition: used, functionality: fully functional, Sacma 3000x6 mechanical guillotine shear, motorized back gauge, throat depth 500 mm, dimensions: 390x195x200 (h) cm, weight: 9900 kg Hsdpfxewn Hfco Afisfn

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg Hedpfxopbwdlj Afisfn ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 Hfsdpfstk N E Aox Afijn The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal.

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Opening width: 177 mm Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Weight: 26 kg Good condition Hfodpfx Asxf U Ahjfion

Condition: used, Technical details: Hfsdpfxjwfrq Sj Afisn width:: 400 depth: 335 mm height: 500 mm 2 pieces available (price per piece) Cast steel material Slot transverse:Quantity 4 Size: a=22mm, h=41mm, b=37mm ,c= 15mm Number of clamping holes: 8 Size 4x22mm/4x26mmm *

Condition: like new (used), Zero point clamping system Hedpfxshlu Nzj Afiefn For rotary table: Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm. For clamping plate: Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Condition: used, sheet width 2000 mm plate thickness 3 mm Hjdpfsxfwdzjx Afisfn rear stop von Hand, 750 mm

Condition: good (used), Clamping towers for horizontal milling center. Different types. Hjdpfx Afjxfugtsiefn

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer Hfsdped Ehfmefx Afien -Quantity: a 2nd plate is still available ID21154 -Clamping plate with: a carriage with clamping device -Car dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Plate thickness: 35 mm -Plate height: 300 mm -Plate with: support ribs -Groove width: 52 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Hfjdjxf Uxcspfx Afion

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm Hjdpsxflftefx Afiefn - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Plate thickness: 25 mm Thickness stop surface: 30 mm Condition: very good Hfodsnpxnmjpfx Afisn

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Quantity: a 2nd plate is still available ID21153 -Width: 1465 mm Hfeded Ehflspfx Afien -Length: 4930 mm -Working height: 860 mm -Plate thickness: 35 mm -Plate height: 315 mm -Plate with: support ribs -Groove width: 51 mm -Groove spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Hodpfx Afexf Uwloisfn Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Plate thickness: 25 mm Thickness stop surface: 30 mm Hjdponpxnijfx Afiofn Condition: very good

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Hfjdpfxjxf Utas Afisn Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition