Used Measuring Devices for sale (16,797)

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and handheld device Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting capacity (nominal load - kg): 2.5 kg Weight: 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V - 50/60 Hz - 3000VA Weight: 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Handheld device: Stäubli SP1 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Laedpfezdytvsx Anuoc We will be happy to answer any further questions you may have by phone.

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, ● Condition: Not tested Lodpsy Sawtsfx Anusac ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM3 Technical data: Measuring volume: 3000 mm Accuracy: 0.045 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness not guaranteed) ● With transport case Dimensions & weights: ● Setup dimensions (L x W x H approx.): 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional information: ► Transport to the destination can be offered upon request ► The quoted price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗The sale of the goods is strictly to commercial customers only❗

Condition: excellent (used), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature up to 80°C, regulated Measurement sensor on sample level XENOSENSIV E(300-400 nm) Ljdezdtkuepfx Anuoac Humidification / irrigation Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V ± 10 % 50-60 Hz Power connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp: 2200 VA Power of the xenon lamp: 2800 VA Rated current: 16A Lamp current max.: 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400 kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, • Type: DSH2/12V • Suction cup type: 150K • Year of manufacture: 2013 • Serial number: 84 • Lifting capacity: 900 kg vertically/horizontally • Lifting capacity per suction cup: 150 kg vertically/horizontally • Can rotate and tilt Lsdpfx Ajywi Dmonusac • Includes battery for independent operation on construction sites

Condition: good (used), Here we offer a Bosch Sigpack Systems unit with a Manz Aico pendant hand programming device. Bosch Sigpack Systems with Manz Aico pendant hand programming device Bosch Sigpack Systems XR31-3 with Manz Aico pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz hand programming device Type: 80017134 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax. Ledpfx Aezdrzrenuoac

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate Ljdpfx Ajy R A Aponueac calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, overall weight: 1,550 kg, Equipment: CE marking, documentation/manual, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Lsdpfer D Nmkox Anueac Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Design Design: Bridge measuring machine Guidance system: High-precision air bearing guides Ljdpfjzf H Eujx Anusac Measuring range X-axis: 700 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 1.7 + l/300 Vectorial acceleration: 1732 mm/s² Vectorial velocity: 519 mm/s Probing system Measurement technology: Tactile Type: PH10M / TP20 Equipment Probe changing system: Included

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) Lajdjzf E Hqjpfx Anuec - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard Ljdpfx Anszf E Dvousac - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: GX17020123, Equipment: documentation/manual, Digital caliper 2000 mm Workshop caliper – jaws 300 mm Ledjy Drxaspfx Anusac

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 13451500, STEINLE 1345 Digital Caliper Lightweight Design 1500 mm Workshop Caliper - Jaws 150 mm Both measuring jaws adjustable Laedsy Dq Hvopfx Anujc Product details Measuring jaws made of lightweight metal with oxide coating Left measuring jaw adjustable Hole starting point 20 mm, with extra large digits - Dirt wiper integrated in the slider - Battery operating time up to 3 years - Measuring speed 2.5 m/s (100?/s) - High-contrast LCD display, 20 mm digit height Functions ON/OFF mm/inch Preset A: 1500 mm B: 55 mm D: 150 mm E: 20 mm Deviation: 0.1 mm

Condition: used, Used power measurement module for integration into industrial laser systems. The device is used for power monitoring and process control in laser applications and features a PROFINET interface for integration into automation systems. Manufacturer: PRIMES Device Type: Power Measuring Module Model: PMM PROFINET Condition: used Year of Manufacture: 2017 Communication Interface: PROFINET PROFINET Revision: 2.3 GSDML Version: V2.3 Device Identifier: PRIMES-PMM-PN-Cu-20140815 Type Identifier: Cu-20140815 2 x RJ45 Ethernet port COM interface External voltage connection Status display: Link Tx/Rx Calibration service sticker present Version for copper interface Location: Kusel Laedpfx Anozdnixeuoc Quantity: 6 units available

Condition: used, length 800 mm width 500 mm height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each Lasdpfotv Icuex Anuoc

Condition: used, Year of construction: 1900, length 1800 mm width 430 mm work height max. 700 mm length in width 510 mm length in total 1920 mm total power requirement kW weight of the machine ca. 300 Kg Ledpfstwbrhjx Anueac dimensions of the machine ca. 1,9 x 0,5 x 0,7 m Measuring plate on 3 adjustable feet

Condition: excellent (used), Year of construction: 2000, length 5.000 mm width 2.000 mm Ledpfx Ast Smhvonusac Thickness 210 mm material Stahlguss control total power requirement kW Weight 6 t dimensions of the machine ca. m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots,

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Coordinate measuring machine with video-based system Ogp Smartscope MVP 300 Year of manufacture: 2012 In very good condition. Technical data: Travel ranges: X: 300 mm Y: 300 mm Z: 150 mm Scale resolution: 0.5µ Dimensions (depth x width x height): 815 x 710 x 800 mm Weight: 140 kg Lsdpfx Anjzfyzcousac Further technical data can be found in the photos. The measuring device can be inspected while powered on and in its operating environment.

Condition: excellent (used), Manufacturer: DEA Type: DEA record 2305 Year of manufacture: Control / measuring software: TUTOR for Windows Table surface: 3,050 x 1,600 mm Column gap: 1,680 mm Distance plate – bridge: 1,200 mm Distance plate – probe: 850 mm Travel paths x – y: mm Lsdpfx Ajwv Tvwenujac Condition: very good Weight: Dimensions: 4,300 x 2,350 x 3,000 + 1,000 mm

Year of construction: 1993, condition: good (used), Measuring Range X – axis 700 mm Y – axis 1500 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 800 kg Lasdpfx Anogvg I Tsusc base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1 manual, PH9 or PH10M as option Probesystem Renishaw TP200 Computer Windows XPP Workstation Software MCOSMOS-1 V2.4

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM2 Technical data: Measuring volume: 3000 mm Accuracy: 0.07 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness without guarantee) ● With transport case Dimensions & weights: ● Installation dimensions (L x W x H) approx.: 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional notes: ►We can arrange transport to the destination upon request ►The quoted price is net plus VAT Lasdsy Sav Nspfx Anuoc ►The goods are sold without any warranty ►Technical data subject to change and without guarantee ►Subject to prior sale ❗Sale is exclusively to business customers❗

Condition: good (used), Year of construction: 2017, functionality: fully functional, Dosing unit MOTAN Gravicolor 30 with GRAVInet Ledozdi Ngepfx Anujac Stock no.: 503694 Machine type/ Device type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 with GRAVInet Year of manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials with the highest recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications with throughput rates of up to 2200 kg/h. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and achieves the best possible operating point at all times through self-optimization. The highest level of recipe adherence results in the best and most consistent product quality.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Metering device Motan Minicolor V Stock No.: 503689 Machine type / Device type: Metering device Manufacturer: Motan Type: Minicolor V Year of manufacture: 2010 Laedozdi Iiopfx Anujc incl. VOLUnet MC Mono incl. HES 50-1ANC conveying unit

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories Laodpst Hwqkjfx Anuec

Year of construction: 1986, condition: used, x-travel 2400 mm y-travel 1600 mm z-travel 1800 mm total power requirement kW weight of the machine ca. 3300 kg dimensions of the machine ca. m Lodpfxet Hwxnj Anueac

Year of construction: 1995, condition: used, x-travel 9200 mm y-travel 1600 mm z-travel 2400 mm dia. of test piece mm working area mm dist. between centers mm control ZEISS C 99 total power requirement kW weight of the machine ca. 30 t dimensions of the machine ca. 10 x 3,6 m Lajdpjt Hwwkofx Anuoc