Measuring microscope video measuring system

OGP Smartscope CNC 250

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Ijdpfx Ahoxf Ikfeyobc

Year of construction: 2017, condition: ready for operation (used), A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible. Ijdpfjzg Itiox Ahyjbc

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Ibedpfx Ahjuz If Njysc Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Iedpfx Ahsglp Nqeysbc Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL Ibedpsuhatpjfx Ahysc * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Ibodpfxox D Nhpe Ahyec Application Types Turning

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Isdpfoxgk Nmox Ahyjbc Taper : BT40 ATC 30

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: 
Wet grinding device
 surface planer device machine light
 pneumatic workpiece clamping Iodpfjg Rw Ntjx Ahyjbc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] Ibsdpfx Ahoyq Nyysyec INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III Very good condition, only 6000 operating hours TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, axis X1: 24,000 mm/min Rapid traverse rate, axis X2: 24,000 mm/min Rapid traverse rate, axis Z1: 32,000 mm/min Rapid traverse rate, axis Z2: 32,000 mm/min Rapid traverse rate, axis Y1: 15,000 mm/min Rapid traverse rate, axis Y2: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm Resolution of axis C: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm Iedpfxozp D Uuo Ahysbc Resolution of counter-spindle axis C: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool head: 8 Number of positions in the turret 1: 5 Number of driven positions in the turret 1: 3 Speed of driven tools in the turret 1: 8,000 rpm Number of secondary machining positions: 8 Number of driven secondary machining positions: 4 Speed of driven tools in secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg