Coordinate measuring machine

Stiefelmayer C-MAN

Condition: used, Measuring and marking plate cast steel gray cast iron heavily ribbed STIEFELMAYER from a measuring or scribing machine with hand-guided measuring arm Machine. No. 8530979 Year of construction approx. 1989 Kedpfedzqpzex Adqslt length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm panel thickness 70 mm throughout - surface machined laterally at a 90° angle 3000 x 360 mm - 6 height-adjustable feet - plus 1 measuring arm, mechanical and electrical without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm space requirement L x W x H 3000 x 2000 x 2500 mm weight approx. 5000 kg very good surface

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Kledpfeuzkwzox Adqjt Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Kjdpfx Adepwpxcsqolt Weight: approx. 2600 kg In good condition

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Kodpekdnwbofx Adqelt Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t Kodslp U Dpepfx Adqjlt

Year of construction: 1990, condition: excellent (used), machine/vehicle number: 432309901, Technical data Manufacturer: Stiefelmayer Type: C-MAN S/N: 432309901 Year of manufacture: 1990 Column cross section 160/160 cross arm 80/80 Measuring range X = 4400 mm Y = 1600 mm Z = 1800 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is intended exclusively for professional customers. Kodpfxohpza Uj Adqelt (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Kljdsh Ek Daspfx Adqst - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Fastech 3-roll round bending machine FRM 1250 x 90 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending roll length 1250 mm roll diameter 90 mm smallest bending diameter 130mm weight 500 kg dimension L-W-H 1950 x 900 x 1130 mm Motor:1.1 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device Kedehzq Dqopfx Adqslt asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Kledpfx Adeg Er Nlsqet Machine weight approx. 9,00 t

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Kledsw U Atbspfx Adqet Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Quality Control: Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.