Used Measuring Column for sale (11,052)

Condition: repair required (used), functionality: not functional, measuring range X-axis: 700 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 450 mm, Mitutoyo BH706 coordinate measuring machine. Mechanically in very good condition, it operated and performed high-precision measurements until the hard drive failure. Klodpfxeyvq Aue Ahvop The machine is being sold as non-functional, intended for refurbishment or upgrade. Note: The photos of the machine were taken when it was still operational. Currently, the machine is dismantled and packed for loading.

Year of construction: 2007, condition: used, Dimensions (LxBxH): 325 x 201 x 351 cm Quick coupler system: Yes Serial number: IN 64931/07 X-axis: 2500 mm Y axis: 1000 mm Z-axis: 800 mm Machine length: 3259 mm Machine width: 2011 mm Machine height: 3510 mm Model: LK V-SL Renishaw control system Probe head controller: PHC 10-2 Interface selector: 191-2 Probe interface: PI 200 Laser scanner accuracy: 9 µm Renishaw PH10M motorised indexing measuring head A-axis rotation: ±180° B-axis rotation: 0-115° Indexation step: 7.5° Total positions: 720 Maximum stylus weight: 300 g Maximum stylus length: 300 mm Position repeatability: ±0.4 µm SCHUNK - quick-change clamping system for use on CNC machines. For securing pallets, clamping workpieces on the machine table with very high positioning accuracy (up to 0.005 mm). Manufacturer: SCHUNK (Germany) Model: VERO-S NSE plus 90 Type: Quick-change clamping module Module diameter: 90 mm Operating pressure: 6 bar Clamping force: up to 25,000 N (25 kN) Material: hardened stainless steel Operation: Pneumatic operation with mechanical self-locking Positioning accuracy: ≤ 0.005 mm Last calibration: 19-09-2024 Renishaw control system: Probe head controller: PHC 10-2 Interface selector 191-2 Probe interface PI 200 TP 200 Renishaw probe Laser control system. Renishaw PH10M - Motorized indexable measuring head. Rotational axes: A-axis: ±180° B-axis: 0-115° Indexing step: 7.5° → giving a total of 720 positive positives Interface: Autojoint/M8 connector (compatible with modular test systems such as Renishaw TP200, SP25M or Nikon/Metris laser scanners) Maximum stylus weight: approx. 300gr Maximum stylus length: up to 300 mm Position repeatability: ±0.4 µm (0.0004 mm) Measurement of parts with complex shapes (turbine blades, molds, housings, etc.) Used with probes such as Renishaw SP25M, TP200 or Nikon/Metris LC15Dx Compatible with most CMM brands (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) Dryer IDH6 Machine was prepared for sale by an authorized technical service company Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. Kodpeyvqf Aofx Ahvelp The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By...

Condition: used, Year of construction: 1995, machine/vehicle number: 7900505, travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, position of the milling head: horizonthal, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, pivoting range: 3 °, type of input current: three-phase, total width: 4,455 mm, total height: 4,200 mm, total length: 7,470 mm, table length: 6,120 mm, table width: 1,000 mm, spindle motor power: 22 W, Equipment: CE marking, documentation/manual, Heidenhain TNC-426 CNC control ATC 60 ISO 50 total weight 28000 kg Kedpjyvpzpjfx Ahvolp Machine is working daily till end of March. Machine is located in Estonia right now. Price is without demontage. Demontage and loading to truck/container possible for extra cost.

Condition: used, Year of construction: 2015, Travel distance: approx. 15,000 mm Kedpfxjyt Nylo Ahvjlp With CNC milling unit!

Condition: ready for operation (used), With this offer, you are purchasing a used Keyence WM-3000 mobile coordinate measuring system. Item for sale: 1 x Keyence WM-3000 with the following equipment: Includes camera tripod Includes laptop with measuring software Includes Messtatser battery Includes transport case Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Ksdpfexzn E Uex Ahvjlp The device has been tested for functionality. For more information, please feel free to contact us personally.

Condition: used, - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 Klodpowfpbbsfx Ahvjp - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Kljdsytyqzspfx Ahvep Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), total height: 3,850 mm, total width: 4,190 mm, total length: 11,300 mm, controller manufacturer: Heidenhain, empty load weight: 22,000 kg, CNC indexeerfreeskop (2,5°) spaantransporteur inbegrepen Optioneel: machine kan worden uitgerust met nieuwe Heidenhain 320-besturing Klodpfx Ahsytyquevep Longitudinal travel X-axe: 6500 mm Crosstravel Y -axe: 900 mm Travel Z-axe (Height): 1600 mm Dimensions clamping space - table: 8000 x 800 mm Power on spindle: 22/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 20 > 3000 rpm

Condition: good (used), INVER-PRESS Tar/S90 Eccentric Press Klsdsyvi Ivjpfx Ahvsp

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Manufacturer: Mitutoyo Klsdpoyvit Ssfx Ahvjp Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request!

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm Kedofxyh Rjpfx Ahvslp pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: Kljdpjk S Dt Tofx Ahvsp HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard Kledpfxsvvudke Ahvop The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: good (used), Year of construction: 2007, machine/vehicle number: 075912, Offer 26444 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 45 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 200 mm - Throat depth: 385 mm Ksdpfx Ahsyvhunevslp - Table with 2 T-slots, height adjustable via hand crank - Table size: 550 x 480 mm - Min./max. distance between table and drill spindle: 120 / 650 mm - Column diameter: 200 mm - Electromagnetic feed rates: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - With overload protection - Infinitely variable spindle speeds in 3 ranges: 60 - 1900 rpm - Drive: 400 V / 3 kW - Space requirement approx.: W 700 x H 2120 x D 1100 mm - Weight approx.: 700 kg - Equipped with: thread cutting device, coolant system, digital speed display

Condition: used, functionality: fully functional, measuring range X-axis: 380 mm, measuring range Y-axis: 450 mm, measuring range Z-axis: 280 mm, Equipment: type plate available, Manual Zeiss coordinate measuring machine with U-Soft and swivel probe Kljdpfx Aoyvhnzohvjp

Condition: good (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (min.): 4,000 rpm, year of last overhaul: 2017, Equipment: documentation/manual, SHW Powerspeed 5 Kodpfoyvgutox Ahvslp Year of manufacture: 2003/2017 overhauled Travel X = 3000 Y = 2100 Z = 1300 (1160) Spindle speed [rpm]: 4000 Control: iTNC 530 Tool holder: SK 50 Tool changer: 48 positions NCR table: 1600x1200 mm Acceleration X, Y, Z axes: 3.5 m/s² Swivel range milling head: 360x1 Swivel range milling head mounting: 1810x1 Internal coolant, chip conveyor, belt filter system Plate field: 4000x1000 mm

Condition: good (used), Column jib crane, overhead crane, workstation crane Ksdpfjyttpqox Ahvslp -Manufacturer: Steel, column jib crane, lifting capacity 2500 kg -Base plate: Ø 705 mm -Load capacity: 2500 kg -Chain hoist: SWF type CC 085.2P, year of manufacture 2013 -2x lifting speed: 4.0/0.7 m/min -Drive system: yes -Swivel drive: yes -Projection: 3040 mm (2000 kg at 4040 mm) -Total height: 4445 mm -Hook height: 3975 mm -Swivel range: 360° -Transport dimensions: 1200/4620/H1960 mm -Empty weight: 1320 kg

Condition: good (used), Calipers, calipers, calipers -Measuring range: 0-350 mm Kledpfx Aed N N Dnohvep -Price: per piece -Number: 1x calipers available -Dimensions: 385/127/H10 mm -Weight: 0.4 kg

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 6851350, Resolution (Z) 0.38 µm (175 mm) / 0.19 µm (350 mm); system: 0.04 µm Contact speed (Z) 0.1 – 1 mm/s Positioning (X/Z) X: 0.2 – 8 mm/s; Z: 0.2 – 10 mm/s Measurement speed 0.2 – 4 mm/s Measuring length (X) 0.2 – 120 mm Measuring range (Z) 50 mm Arms 175 mm, 350 mm Guideway deviation < 1 µm / 120 mm Stylus radius 25 µm Measuring force 1 – 120 mN Additional features Automation, protective elements, advanced calibrations, user safety Kjdjw S Egxspfx Ahvjlp

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Kodpfoyu T Dqjx Ahvslp

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Kledjxlqxfopfx Ahvsp Condition: good, workshop-tested, speed variator with new bearings

Condition: used, functionality: fully functional, Product Name: Universal Measuring Amplifier Manufacturer: Hottinger Baldwin Messtechnik Model: QuantumX MX840A Universal 8-channel measuring amplifier for precise acquisition, amplification, and digitization of mechanical, thermal, and electrical measurands. Item Condition: Scope of delivery as shown in the pictures: 1 x Power supply (1-NTX001) 8 x DSubHD 15-pin connectors with TEDS (1-SUBHD15-MALE) 1 x HBM catman Easy software Kodpfxeyu Sy Ro Ahvslp Please contact us if you have any questions Used item Shipping: The indicated shipping costs apply to deliveries within Germany Worldwide shipping (please inquire about shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to commercial customers, without warranty or guarantee. Deviations from technical data as well as errors in the product description may occur and are subject to change.

Condition: used, Year of construction: 2010, functionality: fully functional, Initial commissioning: March 2010 Kledpfx Aoytf H Ishvsp Control: Fidia with HPX21 handwheel X-axis: approx. 11,500 mm Y-axis: approx. 1,550 mm Z-axis: approx. 2,550 mm B-axis: ± 210° C-axis: ± 104° Spindle speed: max. 16,000 rpm Tool holder: HSK 50A Linear axis drives Feed rate for X, Y, and Z axes: 16 m/min

Condition: used, Year of construction: 2008, Offered here is a pillar jib crane (a total of 4 identical pillar jib cranes are available): Manufacturer: Abus Model: VS Rated for 3.2 tons Jib length: 5 m Year of manufacture: 2008 The offer includes a SWF electric chain hoist with trolley, rated for 3.2 tons. Location: Germany ____ Our terms and conditions apply; the seller is not liable for any typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The condition and wear of the offered items are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty. Ksdpfx Aoyu R R Iohvelp

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. Klsdpfx Asyu Nabshvsp - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.