Used Material Feeder for sale (18,857)

Condition: good (used), D-1035-Double bulk feeder with weight Used Stainless Steel double bulk feeder with weight. Lajdpfsn Nxqwjx Abzeg Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger belt: 460 mm, Small belt 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: used, functionality: fully functional, Year of construction: 2000, color: red, Material / tool or workshop container with 3 aluminum roller shutters on each side, and a tailgate at the rear. Various drawers, pull-out tables, and ramps. In good, well-maintained condition. Loading possible. Ledpezv Dy Dofx Abzjag

Condition: used, power: 155 kW (210.74 HP), fuel type: diesel, color: yellow, mast type: duplex, Year of construction: 2018, operating hours: 11,999 h, Year of manufacture: 2018 Drive: Wheeled Number of cylinders: 4 GVW: 46,000 kg Body manufacturer: LIEBHERR LH 50 LITRONIC CE marking: yes LIEBHERR LH 50 M LITRONIC MATERIAL HANDLER YEAR 2018 TOTAL WEIGHT 46,000 KG REACH 20.0M CE MACHINE ENGINE D934 A7-04 POWER 155KW / 210 HP WHEELBASE CM GROUND CLEARANCE CM WIDTH OF THE UNDERCARRIAGE CM 4-POINT OUTRIGGERS HYDRAULICALLY RAISABLE CABIN 3RD AND 4TH HYDRAULIC LINE INDUSTRIAL STRAIGHT MONOBOOM Z INDUSTRIAL STICK, STICK END WITH ANGLE 5-TINE GRAB MULTI-TINE GRAB CAPACITY 1.10-1.70M3 CRANE IS READY FOR WORK Lajdpsy T Rdgsfx Abzsg WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, mileage: 1,163,000 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Payload: 10742 kg * Height: 3950 mm * Width: 2550 mm * Length: 5960 mm * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 7500 kg * Type | Second axle: Michelin R * Tire size | Second axle: 315/70 R22.5 * Tire tread depth outer left | Second axle: 20% * Tire tread depth inner left | Second axle: 20% * Tire tread depth outer right | Second axle: 20% * Tire tread depth inner right | Second axle: 20% * Maximum axle load | Second axle: 11500 kg * Wheelbase: 370 cm * Cabin: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes Lasdpszv A Rnsfx Abzog * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional features: * 27 MC / CB * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Automatic climate control * DAB radio * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Electronic Stability Program (ESP) * Cruise control * Homepage * Air conditioning * Refrigerator * Air suspension * Air-sprung front axle * Particle filter * Retarder * Disc brakes * Side skirts * Auxiliary heater * Auxiliary air conditioning * Xenon lighting Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. Ljdjif Ug Eopfx Abzsag 2 Component Follower Plate System.

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Ledpoy U H Hmjfx Abzsag Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: used, mileage: 678,000 km, power: 331 kW (450.03 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania S450 4x2 tractor unit * Euro 6C * Automatic transmission * Retarder * Leaf-air suspension * Long-distance cab with 2 bunk beds * ACC adaptive cruise control * Lane departure warning system Lsdpfx Ajzvubljbzeag * Emergency brake assist * Differential lock * Alcoa aluminium rims * 2 tanks, 1200 liters (700/500) * Stationary air conditioning * Automatic climate control * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * Electric windows * 1st owner * ADR EXII EXIII FL AT

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 820 kg, total length: 2,560 mm, total width: 1,700 mm, total height: 1,820 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO Bunker-BC enhances material handling efficiency for quarries, recycling plants, and construction sites. Ideal as a standalone unit or an add-on to the SD Compact system, it boosts throughput by up to 50%, ensures continuous material feeding, and reduces downtime for higher productivity. Key Features: • Robust, high-performance drum bunker for long service life • Bidirectional hopper belt for flexible material flow • Quick-change hopper belt for minimal maintenance • Fully electrical control with frequency converter Tech Highlights: Lodpsw Afdajfx Abzeag W 1.70 m · L 2.56 m · H 1.82 m · Qmax 90 m³/h · Power 2.2 kW (400 V) · Bunker belt W 0.6 m · Filling H 2.16 - 2.66 m · Weight 820 kg

Condition: like new (used), functionality: fully functional, Of the total 24 material containers, 8 units are currently still available. All containers are offered without material conveying devices. Only 4 units feature an extraction box beneath the container. External dimensions are 120 x 120 x 200 cm (length x width x height). Laedpfowpp Ebsx Abzeg Capacity is approx. 1,250 litres. The containers are in very good condition and originate from a cleanroom production environment where only PP material was processed.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion. Lasdpfx Asu Ailgjbzeg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Ljdpfx Abev Im Ulezjag

Condition: excellent (used), Board feeding system for pallet nailing machines. The board feeder is under reconditioning so there is possibility to choose if it should feed boards from right or left side of the machine. Ljdpfx Abozvc S Sezoag

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Ljdpfx Abjzvbldozjag Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: used, Log feeder for medium-sized logs Lajdpfx Ajy Szwzjbzeg 6 chains 3 carriers

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 The machine is fully operational and functional – with new electrical installation and control system. The set includes feeders, conveyors, and operator cabin – all visible in the photos. Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Ledpoyivhnofx Abzsag Main motor power: 55 kW Exact dimensions are shown in the drawing attached in the photos.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Power connection: 230 volts, 50 Hz - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Good condition Lodozrzygspfx Abzoag A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Lodpfxoy N Dvbe Abzoag Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: new, Year of construction: 2026, functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. 360° mounting possible. Laedpfx Aoqgdkbebzeg All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 41,000 kg, Year of construction: 2015, operating hours: 16,952 h, Year of manufacture: 2015 Ledpozu Nwlofx Abzoag 140 kW 16,952 operating hours Permissible total weight: 41,000 kg Without attachments

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters Lajdpfoy Hldnex Abzjg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Lasdpfoy Hlv Rjx Abzeg Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: repair required (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - For parts or repair - some spares with the machine and basic wiring details. READY TO SHIP WORLDWIDE Laedpfxoxyyz Ej Abzsg Export documentation and shipping available

Condition: used, functionality: fully functional, Equipment: CE marking, type plate available, Used Colortronic material dosing system with control cabinet, 5x CSK 5 vacuum receivers, small mixer unit, 30 pieces of aluminium pipes – 6 m length, diameter 50 mm, bends made of stainless steel, mixing station. Lasdpsy Smg Ijfx Abzsg

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Lajdpfxozimgtj Abzeg Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Ljdpfozra Rqox Abzjag Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.