Used Matec for sale (31)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Gkodpfx Ajx D Ix Tek Ujb Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Rota S Plus 800 chuck by Schunk. Gkodpfx Akjxn Ikdj Ujb The operating hours counter is defective.

Year of construction: 2014, condition: like new (used), Matec 30 HVK Working range X 1300 (1500) mm Working range Y 600 (800) mm Working range Z vert. 675 (975) / hor. 800 (1100 at Y=800) mm distance spindle nose / table vert. 0-675 (975) / hor. 175-975 (1275) mm Gjdpfol D Nc Tjx Ak Uskb Working spindle - DIN 69871 (HSK 63A) 15.000 rpm drive power 16 (30) kw at 40% ED Torque max. 100 (190) Nm at 40% ED rapid traverse 30 (48/100 with linear drive) m / min. Machine weight 15 tons Control Siemens

Condition: reconditioned (used), Year of construction: 2007, operating hours: 21,990 h, functionality: fully functional, machine/vehicle number: 0903, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, rotational speed infinitely variable, Travel: 3000 x 800 x 1100 mm (X-Y-Z) Heidenhain iTNC530 control Handwheel 48 tools in the chain Motor spindle: 12,000 rpm / 30 kW / 198 Nm Tool holder HSK63 Direct measuring systems on all axes ICS 20 bar with band filter system, capacity 450 liters Mounted NC rotary table for H/V, diameter 500 mm 3D measuring probe Renishaw Tool setting probe Renishaw New motor spindle, new X-axis ball screw, geometry aligned, completely serviced. Gksdpfx Akjyqx N Dj Uob

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment 3D wireless probe Gkodpfx Akex Sv A So Usb

Year of construction: 2005, condition: ready for operation (used), DESCRIPTION: Control: BOSCH – 3osa TFT color screen TECHNICAL SPECIFICATIONS Machine has double spindles, these can be moved in height independently of each other. 4 x hydraulic chucks diameter 300mm 2 x left, 2 x right with partition for pendulum operation - if required, the partition can be removed to process long parts Workspace: X axis 3500mm Y axis 600mm Z axis 700mm Drive power (40% ED) 32 kW Speed ​​range 20 – 9000 rpm Tool holder SK 40 Number of tools 2 x 36 EQUIPMENT/ACCESSORIES • Workroom full encapsulation with roof, completely closed work space; the loading doors are designed in such a way that loading with a crane is possible when open • Double work area lighting •Safety fence attached to machine •Coolant filter system •Internal coolant supply through the spindles, 20 bar •Flush gun •Chip conveyor •Oil central lubrication •Oil suction •Control cabinet cooling •Direct measuring systems (all axes) •3D probe with radio •Installation elements •Documentation Gkodpfx Aksi Ikyts Ueb The machine listed here is very powerful and is designed for quantities for milling and drilling work and can be inspected under power.