Used Manual Screw Press for sale (29,318)

Condition: used, TECHNICAL DETAILS Same as on photos Ibsdpfxsuhaiqs Ahyoc

Condition: used, TECHNICAL DETAILS Iedpfx Ajuhaiwjhyjbc Same as on photos

Condition: used, TECHNICAL DETAILS Same as on photos Iedpouhaikofx Ahyobc

Condition: used, TECHNICAL DETAILS Same as on photos Iedpouhaidsfx Ahysbc

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) Iodpfxezx Sr Hs Ahysbc complies with CE standards manufactured in 2025, NEW

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements. The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost lossless operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox makes these systems ideal for use under the harshest operating conditions. Ideal for very high compressed air demands Robust drive unit with high power reserves Almost lossless concept with an efficiency of > 98% Maintenance- and service-friendly drive concept ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Ibodpfx Ahettv Ibsysc Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivered volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Iedpfxettucge Ahyobc Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 4-51 1992 Characteristics: Capacity 8.60 bar Ibsdsvyrnzopfx Ahyec Power 250 kW Voltage 500 V Running hours at last maintenance: 57957

Condition: used, Year of construction: 1970, pressure 1 t Isdpfx Asv Td Erjhyjbc Stroke 315 mm

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Serial No: N12533 -max. inlet pressure: 2.9 bar g Ibjdpfx Ajy Snk Uohyjc -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) -place of manufacture: Glasgow, G52 1BE

Condition: used, BOGE Screw compressor / industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Technical data: Manufacturer: BOGE Type: C 9 Device type: Screw compressor Year of manufacture: 2017 Volume flow rate: 1,060 m³/min Compression end pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel ELMED HELIO-STROB BETA A2: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Mains connection: 115 / 230 V AC Mains frequency: 50–60 Hz Max. power consumption: 80 VA Equipment: BOGE base control control unit Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Scope of supply: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures BOGE operating display shown in the switched-on state ELMED HELIO-STROB shown in the switched-on state Type plates are present Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Transport data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of devices: approx. 219 kg plus cable and operating manual Ibjdpfezxpi Nox Ahyoc The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Ibsdpfx Aez Iy Nishysc Price: €14,500.00 net €17,255.00 gross This is a used item. DESIGN Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press Isdpfszu Aibsx Ahyebc

Condition: used, Year of construction: 2016, machine/vehicle number: CD10024721001, Article description Version: V2 Ibodjz Szq Repfx Ahyjc Compressor unit serial number: FK0767480 Order number: 3821761 Volumetric flow rate: 1.87 m³/min Pressure: 7.5 bar Motor power: 11 kW Speed: 3000 rpm Power supply: 400 V / 3-phase / 50 Hz Full load current: 24 A

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Ibjdpfxovmivcj Ahysc System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: new, Screw compressor AIRCRAFT ACS DUO 3.5-10 2x100 KK - Exhibition model - ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery rate approx.: 380 liters, Iodpfxsu R S A De Ahyjbc Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (L x W x H): 1,200 x 900 x 1,250 mm, Weight: 201 kg - New exhibition model -

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm Ibodpfx Ajz Spa Nshysc * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts Ibsdpfeyy U Shsx Ahyec for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Screw Compressor Brand: Alup Model: SCK 15-8 Year: 2008 Free Air Delivery: 1.7 m3/min Pressure: 8 bar Motor Power: 11 kW - 380 Volt Load Hours: 14,242 Operating Hours: 42,034 Ijdsxcybdepfx Ahyebc Length: 1,530 mm Width: 620 mm Height: 900 mm Weight with pallet: 230 kg

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no Ijdpfoz Eap Dex Ahyebc DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2015, COMPAIR C115-12 mobile compressor (DLT1303), fully serviced machine with air dryer (aftercooler). Very good condition. REGISTERED IN POLAND. Compressor registered in Poland. Technical specifications: capacity: 11.5 m3/min; operating pressure: 12 bar; year of manufacture: 2015; engine: CUMMINS; operating hours: 2988. Iedpfx Ahsw Rb Aaeyebc Compressor is fully functional. Link to video below.

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: refrigerant dryer, Renner screw compressor RS-Top 7.5, including refrigerant dryer and compressed air tank We are offering a used Renner screw compressor RS-Top 7.5 for sale, including a refrigerant dryer, automatic condensate drain, and compressed air tank. Screw compressor Manufacturer: Renner Iedez Irpnepfx Ahysbc Type: RS-Top 7.5 Delivery rate: 1,060 l/min Year of manufacture: 2014 Operating hours: 15,256 h Refrigerant dryer Manufacturer: Hankison Type: HHD101 Year of manufacture: 2022 Additional components: Beko automatic condensate drain Schneider compressed air tank, 270 liters If you are interested or have any questions, or if you require further technical information, please do not hesitate to contact us.

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Iodpfxowiwqfe Ahyobc

Condition: used, Screw compressor RefComp -Type: 134-S-160-LZ -Volume: 640 m3/h -Cooling capacity for R134a: 298 kW at -5°C/40°C, 365 kW at 0°C/40°C -Items in magazine: 3 -Reference number: S259 Ibsdpfx Asz E Nmxshyjc -Condition: Used in very good condition, ready to work

Condition: excellent (used), S017062 PROD. ATLASCOPCO TYPE GA26 Plus Ibodoz Iz Igspfx Ahyoc S/N API310087 YEAR 2008 POWER (kW) 26 CAPACITY (m3/min) 4.79 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 22740/23509 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED