Used Golf Course Maintenance for sale (7,999)

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, machine/vehicle number: 173072, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex plus Viper 12 Robot Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control system: CC200 Fully functional Condition: very well maintained Machine comes from its original owner in Germany Extras: - Handling Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core puller: 1x - Highly wear-resistant screw and cylinder - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm - Approved for use up to 350°C - Tool nozzle control, 1-fold hydraulic - Injection unit, swiveling - Screw S8, highly tempered, wear-resistant / thermoplastic - Screw length L/D20 - Hydraulic system HV1 for sequential movement - Interface for coloring Fgedpfx Asz Ng Rwoh Eji - 4 sockets 10A/16A, mold closing side - Interface for ejector lock - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased to 2183 bar Injection volume: 618 ccm Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar spacing: tie-bar-less Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Maximum distance between plates: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Weight: 19,400 kg Dimensions: 7.06 x 2.13 x 2.45 m ✅ Available immediately from our warehouse in Hanover/Germany or with delivery costs covered. Worldwide delivery possible. The machine is our sole property. ✅ The requested machine is available in our warehouse in Hanover and will be offered after functional testing and can be inspected while powered on. For information about the machines we offer and our company: - We only sell our own machines, which we have purchased from ongoing production, from our warehouse in Hanover. - All machines offered are checked and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT intermediaries who trade in third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be inspected in our warehouse.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Fedpfxov Nv Tao Ah Ejgi Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 Fgsdpjyhwrcefx Ah Eei - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M6 Endermolab 1I or optional 2I Beauty and therapy device Body and facial device (new) Endermo lift (Ergo lift) Newest world patent for the face Tested by training instructors (beauty and therapy) Completely refurbished and revised Fresh maintenance performed New hose Reconditioned roller head KM80 from 2013 New roller head KM70 or therapy head TR50 New roller head KM50 New controller from the previous owner Device has been freshly refurbished New valves, new seals, new hose New capacitors, new filters, etc. New price: 39,980 Euros net Suitable for Endermologie body and Endermologie face Optional upgrade to Ergo lift patent 2014, plus 2,000 Euros Fgsdpjcgy Hdjfx Ah Eoi Lipo massage and Endermolift technology can be performed Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual specifications Optional starter kit (bodywear, filters, caps, flyers) A high-quality device in the upper class of the medical beauty league! Not junk like ultrasound or radio frequency from China. Ergodrive, Ergo lift 12 months warranty from the date of purchase, valid only in conjunction with a 2-day training course and final exam Start your Endermology season now. A 100% natural mechanostimulation ensures a painless but intensive treatment. The treatment is highly addictive. Customers come with the goal of strengthening and firming connective tissue, reducing cellulite, and men wanting to tighten their stomachs. My customers typically lose 2 clothing sizes and, scientifically proven, it promotes metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This procedure is patented and has the quality of a Swiss watch movement. I have been treating and trading with older LPG used devices for 18 years, and the results of the latest generation have prompted me to support the new Integral and sister model Endermolab as well as the Alliance. We will also support you with user questions after the purchase. Facts about LPG 40 years of experience World market leader in the medical beauty segment European company 175 verifiable clinical and scientific studies 80,000 devices produced Presence in 100 countries 12 million treatments performed 200,000 treatments per day Leasing possible through our in-house bank, e.g. 399 Euros per month. Pictures are similar, we constantly have new devices on offer YOU are important to us even after the purchase! Nationwide references available Doctors, therapists, cosmetologists, etc.

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft Fodpfx Ajz Sngash Esgi * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: used, fuel type: electric, fuel: electricity, Manufacturer: Clubcar US Fgodpfx Aezni Rfjh Eei

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Fjdpfx Ahoxqhuuj Eogi Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains Fgodpfxszb I Iwo Ah Eei - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Fgodpfx Ajwi Smuoh Eei Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, fuel type: electric, fuel: electricity, Year of manufacture: 2022 Year of construction: 2022 Fgedozvpqbopfx Ah Eji Manufacturer: Clubcar heulweg 44 2295 KG KWINTSHEUL, US

Condition: used, fuel type: diesel, fuel: diesel, Year of manufacture: 2015 Year of construction: 2015 Manufacturer: JCB GB Fgodezu Sb Hepfx Ah Eei

Condition: used, fuel type: electric, fuel: electricity, Year of manufacture: 2022 Year of construction: 2022 Manufacturer: clubcar heulweg 44 2295 KG KWINTSHEUL Fgjdpezwgl Sjfx Ah Eoi

Condition: used, functionality: fully functional, color channels: CMYK, Weiß, Gloss/Klarlack, Primer, number of print heads: 4, year of last overhaul: 2026, type of input current: AC, input current: 2 A, input voltage: 100 V, Equipment: brochure finisher, documentation/manual, For sale is a Roland VersaUV LEF-300 UV flatbed printer including a BOFA extraction system and a primer configuration. Extensive investment – 4 new original Roland print heads A major advantage of this machine: significant investments have already been made in important components. All 4 print heads have been replaced with new original Roland print heads. In addition, 8 dampers, 4 cap tops, a dust filter, and other maintenance and wear parts have been renewed. A total of €7,227.12 gross was invested in these works, including the four new original print heads, other components, materials, and technician services. The corresponding invoice is available and can, of course, be viewed upon serious interest. Primer configuration Fedpfx Ahez Eazge Esgi Approximately €700 was also invested in reconfiguring the machine for primer application. Instead of a second clear coat/gloss channel, primer is now directly available via the machine. This is particularly interesting for applications where additional surface preparation is required to improve adhesion. The machine is equipped with CMYK/color, white, gloss/clear coat, and primer. BOFA extraction system included The offer also includes a BOFA extraction system. This means that not only the printer itself is offered, but a comprehensively equipped complete package. Inspection & test print possible Especially when purchasing a used professional UV printer, one should be able to personally inspect the machine before buying. Therefore, inspection and test printing on site are expressly possible. The existing invoices and documentation regarding the work carried out and the replacement of the print heads can also be viewed. Why is the printer being sold? I acquired the Roland specifically for my own production and subsequently invested extensively in the machine. However, in practical use, it has become apparent that I need a different production process for my very specific application and my requirements for the final product. Therefore, I am restructuring this production area and selling the Roland. Location & shipping Location of the machine: 3730 Austria Collection and inspection on site are possible. Alternatively, the machine can be shipped throughout the EU by a forwarding agent. The transport costs depend on the respective destination and can be clarified in advance. Price €16,900 net (negotiable) An interesting complete package for commercial enterprises looking for a Roland VersaUV LEF-300 with four already renewed original Roland print heads, a primer configuration, and a BOFA extraction system. Please feel free to contact me if you are seriously interested. Inspection and test printing are possible by appointment. Weight: 144 kg Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.1 A Number of phases: 1 φ Printing area: 770 × 330 mm Max. workpiece/media size: 800 × 360 mm Max. object height: 100 mm Max. object weight: 8 kg Printing resolution: max. 1,440 dpi

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. Fgedpjxw N S Iefx Ah Eei We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 13902, Equipment: low noise, Groninger MFCS 201 RH – Filling, closing, and labeling machine – Year of manufacture: 2021 – Like new For sale is a high-quality, fully automatic filling, closing, and labeling machine from the German manufacturer Groninger GmbH & Co. KG. Type: MFCS 201 RH, machine no. 13902, year of manufacture 2021. The machine was installed and put into operation at our location in Solingen in 2022. The machine has been used very little and is in almost new condition. In total, only approximately 300,000 containers have been filled with it. For the majority of the time, the system was idle and not used in continuous or multi-shift operation. Individual components, in particular the integrated labeling system, were not used at all in our production facility. The verifiable new price of the machine without laminar flow was €630,000 net. The machine is sold without the laminar flow unit. The system is designed for a capacity of up to 60 units/min or approximately 3,600 units/hour. The existing format is designed for micro-screw caps. The documented filling volume is approximately 0.3 ml. The existing container has a diameter of approximately 11 mm and a height of approximately 43.9 mm; the screw cap has a diameter of approximately 13 mm. Other formats are possible; however, format parts would then need to be manufactured. The machine features a Groninger peristaltic/hose pump filling system with a filling needle and automatic filling needle movement. The containers are automatically fed via a vibrating hopper and sorting unit and transported through the machine via a timed conveyor. The screw caps are also sorted and fed fully automatically. The system features pre-closing and final closing stations, closure control, and automatic good/bad part sorting. Integrated is a fully automatic all-round labeling station with a servo-motorized CAB labeling system. In addition, a Markem thermal transfer printer is integrated for variable markings such as batch and date, as well as a check for "print present." The system also features recipe management, user management, diagnostics and service functions, a piece counter, alarm/event displays, and remote maintenance capabilities via a VPN router. Fgodpfx Ahez R A Sge Eji An original Groninger EC/EU declaration of conformity is available. The machine complies with, among other things, Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU. The complete, extensive Groninger original documentation is available, including operating, maintenance, and repair documents, spare parts and wear parts lists, format documents, pneumatic and layout plans, and FAT documentation. The machine has been professionally disassembled by us and is currently stored safely. The disassembly was documented in a video. We can support the buyer in reassembling the machine and explain the operation and functionality of the machine. Alternatively, Groninger can, of course, be brought in for assembly, commissioning, and service. There is also an existing order for this machine that the new buyer can fulfill if the client wishes. The client is from Switzerland and has an order volume of €60,000 per year. Location: 42699 Solingen, Germany. Inspection possible by appointment. We will gladly provide further technical documents upon request from a seriously interested buyer.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel Fedpfx Asxbpgtjh Esgi 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: excellent (used), Special opportunity – also ideal for aid organizations and crisis areas! From government stock, we can offer you this top-condition Evita 4 intensive care ventilator, a world-renowned product from "Dräger," as a complete system! The Evita 4 is one of the most widely used systems worldwide for medical intensive care ventilation and is particularly distinguished by its compact design and robust technology. It supports almost all ventilation types and operates fully automatically. Furthermore, it is ideal for both adults and children and can also be operated temporarily using the built-in batteries. The device sets were specifically designed for use in mobile field hospitals and hospitals and are stored in special Zarges boxes, including all accessories. They are in top condition and were generally only put into operation for testing purposes – no commercial use has taken place; everything is in perfect, undamaged condition – see pictures. All devices have been tested for functionality, pass the self-test without restrictions, and are equipped with functioning or new batteries. Scope of delivery: - Dräger Evita 4 intensive care ventilator - Device trolley - Medication nebulizer - Breathing air humidifier - Power supply Fsdpfjzdt Dbox Ah Eegi - Hoses and spare parts - Documentation in three languages - Zarges aluminum box (approx. 120 x 80 x 75 cm) For the sake of good order, we would like to explicitly point out that, in the case of professional use, the legally required maintenance/inspections, e.g., MTK/STK, must be carried out again. The following ventilation modes can be selected: - Volume-controlled ventilation PLV and AutoFlow - Sigh - SIMV - ASB - BIPAP - BIPAPAssist - APRV - MMV - Flow measurement - CPAP - IPPV / IPPVAssist - IRV - BTPS The total weight of the system, including accessories and pallet, is approximately 140 kg! Insured shipping via a forwarding agency is possible for an additional charge. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly not permitted! The price refers to one system each, including all items listed in the scope of delivery – see pictures. The goods are sold with the exclusion of any guarantee or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body and health. Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Vertical injection molding machine with rotary table – complete maintenance history (documented annually) Manufacturer: Engel Type: Insert 200H/70 Fsdpfx Aoy Ir Nyjh Eogi Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control: CC 200 Language: German, English Fully functional Condition: very well maintained Machine comes from a German first owner xxxxx without the depicted peripheral devicesxxxxx Extras * Light grid / light curtain * Freely programmable inputs and outputs * 9 freely programmable inputs can be programmed depending on the station * 9 freely programmable outputs * Handling interface Euromap 67 * Charge amplifier for internal pressure-dependent pressure switching, including the corresponding graphics pages * 3 potential-free monitoring inputs for monitoring peripheral devices such as temperature controllers * Euromap 63 interface for connection to a machine data acquisition system * Hot runner control / shut-off nozzle control * Complete maintenance log * Language: German - English Injection unit Screw diameter: 30 mm Injection weight: 89 g/PS Injection pressure: 1451 bar / increased 2205 Injection volume: 99 ccm Clamping unit Clamping force: 70 tons / 700 kN Diameter of rotary table: 1200 mm Opening stroke: 305 mm Ejection stroke / force: 105 mm / 20.1 kN Clamping unit: fully electric - Available immediately and can be loaded free of charge onto the buyer's truck at our warehouse in Hanover/Germany or free delivery to your location against reimbursement of freight costs – worldwide delivery possible - The machine was tested before disassembly - The machine is our sole property - The requested machine is available immediately in our warehouse in Hanover and is offered in working condition and can be inspected under power. For information about the machines we offer and our company: - We only sell machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before disassembly. - We do NOT sell insolvency goods - we are NOT an intermediary that deals with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: like new (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,900 mm, Here, we offer the following well-maintained, used injection molding machine for sale as part of our injection molding machine trading business. We also purchase well-maintained injection molding machines, with a focus on models manufactured from 2010 onwards. We have been a wholesaler of used injection molding machines and peripheral equipment for injection molding applications for over 27 years. Handling unit in top condition. Manufacturer: Geiger Type: Midliner 3.O V5.0 Year of manufacture: 2011 Operating hours: approx. 20,000 hours Dimensions: X-axis, ejector stroke: 300 mm Y-axis, vertical stroke: 1000 mm Fgjdpez Spq Ssfx Ah Eji Z-axis, traverse stroke: 1900 mm Includes programming unit: HT320Z Tried-and-tested line-based programming PC interface via USB Program assistant - Available for immediate loading onto the buyer's truck from our warehouse in Hanover/Germany, or available for delivery to your location with shipping costs covered – worldwide delivery possible. - The machine was tested before dismantling. - The machine is our sole property. - The requested machine is available in our warehouse in Hanover and will be offered after a functional test and can be inspected while powered on. For information about the machines we offer and our company: - We only sell machines that we have purchased from ongoing production and that are stored in our warehouse in Hanover. - All machines offered are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT an intermediary that deals with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.

Condition: excellent (used), From government surplus, we can offer you this top-condition, complete HD7 system from the world-renowned brand "Philips," complete with all accessories! The HD7 is one of the best-selling systems worldwide and is particularly distinguished by its versatile applicability and robustness. Thanks to the Zarges metal box (cabinet) specially made for these devices, it is perfectly housed, and all components are protected from dust and water. The devices were specifically acquired by the Bundeswehr (German Armed Forces) for use in mobile field hospitals and clinics and were never used commercially; their use was generally limited to annual inspections and test runs. All systems are in very good condition, both visually and technically, with no significant damage. Minor scratches or discoloration on the housings may be present but do not in any way affect their use – see images! Scope of delivery: - Philips HD7 ultrasound device - Printer - Philips C5-2 Convex Array probe - Philips L12-3 Linear Array probe Fsdpfx Ahezzblbe Esgi - Zarges box, software, documentation For the sake of clarity, we explicitly point out that, in the case of professional use, the legally required maintenance/inspections, such as MTK/STK, must be carried out again. The total weight of the system, including accessories and pallet, is approximately 200 kg! The device can be picked up at our premises during regular opening hours by prior arrangement. Insured shipping via a freight forwarder is possible for an additional fee. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option to purchase the device "on behalf of a customer"; a direct commercial sale to private individuals will not take place. The price refers to one system each, including all items listed in the scope of delivery – see images. All devices are in comparable condition to the system shown in the images; the images are representative of all offered systems. The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, or for any injury to life, body, or health. Please feel free to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine: We also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection molding machines for over 25 years. Manufacturer: KraussMaffei Type: KM EX 80-380 (fully electric) Serial Number: 61013142 Year of Manufacture: 2009 Operating Hours: 35,808 h Control System: MC 5 Fully functional Condition: very well maintained Fedpfx Ajyrd U Uoh Eogi Machine comes from a German original owner xxxxx without robot / without temperature control unit xxxxx Extras: - Needle-gate nozzle, pneumatically operated - Pneumatic valve 1 on back wall adapter plate (BWAP) - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Defect sorting chute - Nozzle protection door - mold opening protection door, hinged - Euromap interface 18 on front wall adapter plate (FWAP) - Ejector plate, electrically operated on BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection molding circuit - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8-way - 8 x temperature control points for hot runner - Extrusion injection circuit with position point control - 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QS package, cycle time analysis, cycle memory, event log - BluePOWER package – display of energy consumption - Graphics analysis package, trend graph - Interface for temperature control unit - Cycle time analysis, cycle setpoint optimization Main language: German Injection Unit Screw diameter: 40 mm Injection weight: 186 g/PS Injection pressure: 1860 bar Injection volume: 204 ccm Clamping Unit Clamping force: 80 tons / 800 kN Tie bar distance: 420 x 420 mm Platen dimensions: 655 x 670 mm Tool installation height: 250 mm Maximum distance between platens: 750 mm Ejector stroke / force: 100 mm / 22 kN Clamping unit: fully electric Warranty Warranty until first commissioning - Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe. Worldwide delivery by container or box is also possible. Organization of customs clearance included. - The machine was tested before dismantling. - The machine is in our sole ownership. - The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power. For information about the machines we offer and our company: - We only sell our own machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Fjdjw N Iz Hepfx Ah Ejgi Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering a top-quality Jungheinrich forklift; it underwent a complete "5-Star" refurbishment by Jungheinrich in 2021 and has logged only 45 hours since that time. The paintwork is original and has not been repainted or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspections (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 Safety inspection (UVV) valid until: 10/2025 Operating hours: 7,792 (7,744 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-Star refurbishment: 03/2021 (complete), including Kaup fork positioner T466 Load capacity: 4,000 kg Fsdpezn Uv Tsfx Ah Eegi Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex mast including full free lift Equipment: Solo-Pilot control, road-legal lighting (StVZO), LED lighting (2 front and 2 rear work lights), front/roof/rear cab windows Steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics (2 functions) Kaup fork positioner (NEW): 4.8T 466B The vehicle has run for only 45 hours since its refurbishment; all safety inspections and maintenance work have been carried out. Please feel free to contact us if you have any further questions!

Condition: good (used), From the inventory of the Cologne Fire Department, we can offer you this emergency ventilation system from the world-leading brand "Weinmann," model Medumat Standard, complete with oxygen module, Lifebase III carrying frame, and transport bag – sold as a complete system. All devices are in good visual and technical condition; there are no significant damages. Scratches or color changes to the housing may occur due to previous use, but these do not affect functionality in any way. The Medumat Standard is one of the most widely used systems worldwide, operating extremely reliably under all conditions and is nearly indestructible. It is especially suitable for use in areas where a reliable power supply cannot be guaranteed, as it operates largely independently of electricity. As the system functions almost entirely mechanically, there is no need for complex maintenance of electronic components—only the built-in batteries need to be replaced regularly, approximately every two years. The included Lifebase III carrying system and transport bag ensure safe handling and protection, making the system ready for use within seconds. Scope of delivery: - Weinmann Medumat Standard - Weinmann Oxygen Module - Weinmann Lifebase Carrying System - Weinmann Transport Bag The total weight of the system including accessories is 10 kg. Shipping via DPD is available for an additional fee. Alternatively, you are welcome to pick up the device during our regular business hours. The sale is strictly limited to commercial customers; you will, of course, receive an invoice, but no VAT will be shown, as the device originates from a public institution. Private buyers can acquire the device "on behalf of a customer;" direct commercial sales to private individuals are expressly excluded! - The listed price refers to one ventilation device with accessories as described - For commercial use, all required tests according to MTK / STK regulations must be carried out anew before commissioning! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. Fsdpfex Dmz Tjx Ah Esgi If you have any questions regarding pricing or technical specifications, please do not hesitate to contact us at the address provided.

Condition: new, functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at the smallest angle: 14 Strokes per minute at the largest angle: 8 Fsdpozrgf Uefx Ah Ejgi Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of manufacture: 2010 Delivery and installation at your location are, of course, possible; delivery costs and any additional charges will be agreed upon. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.