Used Machining Center for sale (70,812)

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Codpfjyan Rcsx Alborg Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Deckel Maho DMC 103V Vertical Machining Center The machine is in good condition and can be inspected while powered on at any time. Technical data: Year of manufacture: 2003 Control system: Heidenhain TNC 426 / 43 Travel ranges: X: 1000 mm Y: 600 mm Z: 600 mm Cedpfjzw U Rcex Alberg Spindle: 10,000 rpm Tool holder: SK40 ATC with 24 positions Table: 1200 x 600 mm Weight: approx. 6,750 kg Dimensions: 410 x 242 x 275 cm Accessories and options: Coolant tank Electronic handwheel with 3D path control Cooling system with compressed air Operating mode 4 Documentation

Condition: good (used), Year of construction: 2008, Ref. -No.: 10660 Manufacturer: DECKEL MAHO Type: DMC 835 V Year of construction: 2008 Type of control: CNC Control: Siemens 840D mit Shopmill Cjdpfx Aszw Txfjlberg Storage location: Halberstadt Country of origin: Germany X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Main spindle drive power: 14 kW Table Dimensions (Lengthxwidth): 1000 x 560 mm Table Load: 800 kg Tool Taper: SK 40 Numbers Of Tools In Magazin: 20 Turning Speeds: 10000 RPM Max. Workpiece Weight: 4,5 t Further information: - Chip conveyor - Handwheel The machine can be inspected while powered on by prior arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Crodpfjzw Tw Usx Albjg Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 409 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, table width: 375 mm, table length: 1,060 mm, table load: 250 kg, spindle speed (max.): 6,000 rpm, Machine type: Vertical machining center Travel in X: 450 mm (17.7") Travel in Y: 310 mm (12.2") Credezau T Repfx Albsg Travel in Z: 409 mm (16.1") Table size: approx. 1060 × 375 mm Max. table load: approx. 250 kg / 550 lbs Spindle speed: 6,000 rpm Main drive: 3.4–5.5 kW Tool changer: 8-position ATC Rapid traverse: up to approx. 12 m/min Control system: Heidenhain Machine weight: approx. 2,100 kg Dimensions: approximately 1.9 × 1.88 × 2.22 m

Condition: used, Year of construction: 2007, X-axis: 500mm, connected load: 30.8kVA, length: 1624mm, width: 1560mm, height: 2829mm, weight: 2.4t, operating hours: 8,840h, power-on time: 89,352h, total operating hours: 28,840h, an on-site inspection is possible. Credozytcpopfx Albeg

Condition: used, Year of construction: 2008, machine/vehicle number: 0-250-19-0287, functionality: fully functional, input voltage: 415 V, input current: 125 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,500 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 60 mm, actuation type: electric, total height: 2,760 mm, total length: 5,280 mm, total width: 7,150 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, The PROFI BHT 500 drilling center is equipped with 2 upper tool heads. Each head includes: a) two sets of vertical drills with a 32mm spacing: 17 spindles in the Y-axis, 15 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 5kW and an ISO30 chuck. The machine also features two horizontal drilling units, each consisting of: two units equipped with 9 spindles with a 32mm spacing, and 2 glue guns for applying adhesive and furniture dowels. Codpfx Aozyp Tkolbjrg Belt conveyors at the infeed and outfeed points allow for manual loading of parts, and the machine can also be operated in a production line.

Condition: used, Year of construction: 2015, operating hours: 38,504 h, functionality: fully functional, torque: 200 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,935 h, number of spindles: 1, number of slots in tool magazine: 60, DMG MORI DMC 1450 V Vertical Machining Center | Year of Construction 2015 | SK40 & 60-position Magazine For sale is a robust and precise vertical machining center from the manufacturer DMG MORI, model DMC 1450 V. This machine, built in 2015, is extensively equipped, including with internal cooling, a direct path measuring system, and a 10,000 rpm spindle with 200 Nm of torque. In 2021, the spindle was professionally replaced after an incident. General Machine Data Cjdpfozypzzjx Albsrg * Manufacturer: DMG MORI * Model: DMC 1450 V * Year of Construction: 2015 * Machine Number: 14595607194 * Operating Hours: 38,504 h * Spindle Hours: 12,935 h * Machine Weight: 9,900 kg Control System * Type: Siemens 840D solutionline Operate 3D control system Spindle * Speed: 10,000 rpm * Torque: 200 Nm * Tool Clamping: SK40 * Note: Spindle replaced after incident in August 2021 (according to service history) Tool Changer * Magazine Positions: 60 positions * Tool Clamping: SK40 Coolant & Disposal * Internal coolant supply (IKZ): Basic package 3 * Blow-through air through the spindle center * Coolant/air switching * Flushing gun for chip flushing * Oil and emulsion mist separator (mechanical) Additional Equipment & Measuring Technology * Path measuring system: Direct path measuring system X, Y, Z * Measuring probe: Infrared TS649 DMG * Enclosure: Operating mode 4 * Software: DMG Netservice - client Excerpt from the Service History * 10/2022: Complete replacement of the X-axis bellows * 03/2022: Replacement of the Y-axis roof * 12/2021: Replacement of the left-hand blind * 10/2021: Timing belt renewed * 08/2021: Spindle replacement after incident * 2020/2021: Work/replacement on the OP019 TFT 19" screen From an insolvency proceeding, sold as is. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on Cjdpfxezypt Ro Alborg The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Cjdpozyptdefx Alborg Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.

Condition: good (used), Year of construction: 2010, functionality: fully functional, The machine is in good technical condition. Travel in the X-axis: 1100 mm Travel in the Y-axis: 650 mm Travel in the Z-axis: 600 mm Max. spindle speed: 8000 rpm Credpfjzypnuex Albeg Number of tools in the magazine: 40 Dimensions of the work table: 1300 x 650 mm Inspection during operation is possible upon agreement.

Condition: used, Year of construction: 2008, machine/vehicle number: 97457, functionality: fully functional, input voltage: 380 V, input current: 52 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, number of slots in tool magazine: 120, actuation type: electric, total height: 2,600 mm, total length: 6,500 mm, total width: 7,500 mm, overall weight: 12,000 kg, Equipment: CE marking, documentation/manual, FTT Insider R8 drilling center with transverse feed, equipped with 4 upper tool heads. Csdpfxozypnbe Albsrg Each head features: a) two sets of vertical drills with a 32mm spacing: 18 spindles in the Y-axis, 14 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 3.8 kW and an ISO30 chuck. The machine also has two horizontal drilling units, each consisting of two units equipped with 18 spindles with a 32mm spacing. The machine is equipped with two chain-type tool magazines for vertical drills: 60 positions each. Belt conveyors at the inlet and outlet allow for manual loading of parts; it is also possible to operate the machine in a production line.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Codpfxjzypmqe Alborg Made in Germany.

Condition: good (used), Year of construction: 2006, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Manufacturer: Flott Type: BC 40 Super Year of manufacture: 2006 Tool holder: BT 40 Crjdpfxet H Rv Tj Albeg Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: used, Year of construction: 1980, machine/vehicle number: 403006, power: 15 kW (20.39 HP), input voltage: 380 V, Centering and end machining machine WMW Fritz Heckert FXLZD 160, manufactured in the 1980s Condition: functional, in operation Year of manufacture: approx. 1980 (1980s) Location: West Saxony Price: upon request Cedpfx Aszyl Rlolborg Technical data: Manufacturer: WMW Fritz Heckert Model: FXLZD 160 Manufacturing number: 13600 Rated voltage: 380 V Control voltage: 24 V Connected load: 15 kW Rated current of the machine: 40 A Description: We offer this used WMW Fritz Heckert FXLZD 160 centering and end machining machine, manufactured around 1980. The machine is used for the simultaneous end machining (facing and centering) of shaft ends as preparation for machining between centers. The machine is functional and currently in operation. Inspection and functional testing at the location in West Saxony are possible by appointment. If you have any questions or require further information, please send a message or call. Price: upon request Other machines available from site liquidation Site takeover negotiable

Condition: used, Year of construction: 2012, operating hours: 25,742 h, functionality: fully functional, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, Used 3-axis machining center with Heidenhain control. Currently still in operation. Will be replaced by a larger machine. Inspection possible by appointment. Crodszyl Nnspfx Albeg Available at the end of 2026.

Condition: used, Year of construction: 1999, operating hours: 27,168 h, functionality: fully functional, controller manufacturer: SIEMENS, controller model: 840D, rotary table diameter: 800 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 6,300 rpm, spindle speed (max.): 6,300 rpm, coolant supply: 20 bar, spindle motor power: 11 W, spindle nose: SK40, number of slots in tool magazine: 32, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, - Siemens 840D CNC control, simultaneous, TRAORI - Swiveling milling head (horizontal / vertical) - NC rotary table (C-axis) - 32-position tool changer Colombo - Chip conveyor Fames - Electric handwheel - Coolant system (IKZ 20 bar) Knoll / modified - Blum tool measurement - Renishaw workpiece measurement - Work area extraction system Martin Walter Cjdpfxjzyludj Albsrg - Oil temperature control Cosmotec - Hydraulic system Rexroth - Linear scales and rotary encoders Heidenhain Travel in X-axis (longitudinal) 1200 mm Travel in Y-axis (cross) 600 mm Travel in Z-axis (vertical) 700 mm C-axis rotary table 360° B-axis milling head +/- 90° Rotary table size 800 mm Spindle taper SK40 Spindle speed (2-steps) 20-6300 rpm Number of tool positions in ATC 32 Spindle drive power 100% ED 11 kW Machine weight approx. 9000 kg Supplier

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm Crjdpfxezw N E Is Albeg control FANUC 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Codpszm Ub Hefx Alberg Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 712 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens und Heidenhain, workpiece height (max.): 400 mm, workpiece diameter (max.): 540 mm, workpiece weight (max.): 200 kg, total height: 3,360 mm, total length: 4,040 mm, total width: 2,770 mm, table load: 200 kg, rotary table diameter: 410 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Machine available with Siemens 828D Technical data 5-SIDE MACHINING • B/C-axis encoder • B-axis +30° to -120° • C-axis 360° • Media preparation table TOOL MAGAZINE CAPACITY • 60-position magazine (chain) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel X: 712 Y: 540 Z: 515 • Swivel diameter 540 mm • Workpiece weight 200 kg • Workpiece size ⌀540 mm x 400 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good access to the machining area and tool magazine EQUIPMENT • CNC control Siemens 828D (15") or Heidenhain TNC 640 • MPG handwheel • 60-position tool magazine Cedpfszlhvhox Alborg • 12,000 min⁻¹ (taper #40), coupling • Spindle cooler • Air blow-through through the spindle • 20 bar coolant supply • CAN filter for chip flushing/ring cooling • Automatic central lubrication system • Media preparation table (6 connections) • Glass scales X, Y and Z axis • Chip conveyor • Direct path measuring system C/B axis • Deublin rotary union • CE specification

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Cedpoy S U Duefx Alberg

Condition: excellent (used), Year of construction: 2007, operating hours: 41,759 h, functionality: fully functional, machine/vehicle number: NH502GC0313, Equipment: chip conveyor, documentation/manual, CNC controller: MSX-701iA Axes X-axis travel mm: 630 Y-axis travel mm: 600 Crjdpozyfyyefx Albeg Z-axis travel mm: 670 B-axis travel degrees: 360º (indexing 1º) Number of pallets: 2 Table dimensions mm: 500x500 Spindle Spindle speed rpm: 14,000 Tooling system Tool holder: BT40 Number of tool positions: 120 (60+60) Equipment Chip conveyor Warning light Knoll system, 750 liters Internal coolant supply

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions Cedeyfgzdepfx Alborg 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, machine/vehicle number: 008595, X axis working area: 4687 mm Y axis working area: 260 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 4 axes Total number of tool changer positions: 44 Crodpfx Aloy Stvvsbsg

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel Crjdpfx Aezw Dcnelbeg - Machine hood - Chip conveyor