Used Machine A Sac Papier for sale (31)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm Rbsdpfew U Dxfsx Ahzst • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: excellent (used), Technical data: Working width: 960 MM 1 Combination unit Shaft diameter: 160 MM Height of processed material: 160 MM Grinding belt dimensions: 990x1800 mm Rsdpfxet Iv Aze Ahzsbt Extraction spigot(s) diameter: 140 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Rsdjvt Ttljpfx Ahzjbt Height of the machine approx. 2500 mm Panhans band saw guide above and below Saw blade length 5700 mm

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Redpfx Ahovyd Dbjzsbt

Condition: used, Year of construction: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial number: 9304 Year: 1993 Model: F5 Serial number: 93030 Rbodsrx Tcgepfx Ahzot Year: 1993 Machines visible in our workshops CHARACTERISTICS : - Cutter rotation speed: 6000 rpm

Condition: excellent (used), THICKNESS PLANER model SAC SUERI RS 53 S second hand machine Rodpfx Aoglp Nishzsbt CE mark : Yes Technical details : Useful working width mm. 530 Maximum (minimum) working height mm. 300 (3) Maximum removal mm. 8 Variable feed speed by inverter m / min. 4 ÷ 16 Motorized table positioning with electronic reading n.4 knives "Tersa" Main motor power Hp 5,5 volt. 380/50

Condition: used, Year of construction: 1980, Spindle swivels: No Sliding carriage: Yes Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Height indication: Scala Swivel angle display: - Milling stop display: Scala Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 motor power: 5 kW Motor brake: Yes automatic Redek Eakcjpfx Ahzebt Suction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Weight: 600kg

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Rbodjyffxzjpfx Ahzst Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: excellent (used), Year of construction: 1998, For sale is this SAC bandsaw. It operates flawlessly and can be inspected and tested on site. Machine details: Year of manufacture: 1998, wheel diameter: 600 mm, cutting height: 435 mm, cutting width: 580 mm, motor: 1.5 kW. Accessories: spare blades, 2 stops. Rjdpoyc Ntdsfx Ahzebt

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Table length mm 2900 Rjdsx S Ivkepfx Ahzsbt Infeed table mm 1550 Outfeed table mm 1310 Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Motor power HP 4 Required space mm 2900 × 700 × 960 Weight kg 475 Condition: function tested

Condition: good (used), SAC spindle moulder with sliding carriage and power feed Rbedpsx Sw Szofx Ahzjt 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Spindle diameter 40 mm 7.5 kW motor with brake CE mark Technical documentation included Machine tested, fully functional, ready for work

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale Rjdpfxsx Nrvve Ahzebt

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each Rsdpfox Riccex Ahzjbt - Volt 400/50 - S/N AA0985 - Year 2001

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg Redpfx Aow I T N Hshzobt

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. Rbedpfxjudxche Ahzet - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere Rbjdpfx Ahotyv Aajzet 5,5 kw Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, total length: 1,050 mm, Weight: 820 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Rjdjwnhyzjpfx Ahzobt Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, SAC F4 window making tenoning machine Technical condition: good, the machine is in working order. The price of the machine includes a large set of spare parts. Technical data: Min. workpiece height: 30 mm Max workpiece height: 90 mm (105-130 mm) Min. workpiece width: 30 mm Max. workpiece width: 600 mm Min. workpiece length: 200 mm (measured inside the pivots) Max. workpiece length: 3000 mm Max. tenoning depth: 130 mm Rbedjrzvkcjpfx Ahzet Max. trimming width: 1000 mm Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Vertical stroke: 290 mm Zero tool diameter: 300-350 mm Stumpfstoßsäge (keel saw) Horizontal stroke: 130 mm Positioning with continuous axis Tool diameter: 400 mm RPM: 3000 rpm Motor power: 3.2 kW Zapfenschneidwelle (journal cutting shaft) Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 3500 rpm Profilschneiden (profile cutting) Min. workpiece height without guide on the left side: 20 mm Max. workpiece height: 140 mm Min. workpiece width: 45 mm Min. workpiece length: 200 mm (measured inside the pivots) Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Tool diameter in zero position: 110-140 mm Maximum tool diameter: 240 mm First profile cutting shaft: Motor power: 5.5 kW (7.5 or 9.25 kW) Speed (clockwise and counterclockwise): 6000 rpm Second shaft for profile cutting: Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 6000 rpm Tenon cutting carriage: Work surface dimensions: 750x900 mm Motor power: 1.1 kW Working speed: 3-10 m/min Positioning speed: 45 m/min Number of splinter guard positions: 4-8 Scale positioning with continuous axis up to 3000 mm Angular guide ± 60° Saw for glass weld unit: Motor power: 2.2 kW Saw diameter: 200 mm RPM: 6000 rpm Profile milling feeding device: Motor power: 0.75 kW Feed speed (from ... to ...): 4-20 m/min Number of rollers: 16 Diameter of rollers: 145 mm Groove cutter for metal fittings (on request) Motor power: 3.3 kW (5.5 kW) Maximum tool diameter: 190 mm Spindle diameter: 30 mm RPM: 6000 rpm Horizontal movement: 70 mm Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4300 kg

Condition: ready for operation (used), Year of construction: 1985, Thickness planer SAC RS/530 electric height adjustment under-table roller separate feed motor Planing width: 530 mm, Number of knives: 4 pcs, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Redpfox Dylrjx Ahzebt Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg Price: 3200.- Year of manufacture: 1985

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Rodpfsuy H Nwjx Ahzebt Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Redpfexran Njx Ahzobt Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: excellent (used), functionality: fully functional, SURFACE PLANER machines . different models second hand machines n.4 knives Rbedpfx Aewt T Hdshzjt volt. 380/50

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table Rodpfxoxdxk Te Ahzobt • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES Redswrh Hvepfx Ahzjbt - Working table mm. 2400 - Volt 400/50 - S/N 9813 - Year 1998

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 Rsdpjhwwlpefx Ahzjbt S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked