Table mill

SAC TS 110

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 Rjdpfx Adev Im Swsrow 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, Used machine Rodpfeza I Tkex Adrew Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 1998, SAC milling machine €2,000 Redpfjx Av Aqox Adrjw Set of 20 cutter tools €2,000

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 Rsdpewrh Hvjfx Adrew - S/N 9813 - Year 1998

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Rjdpsy Emf Rofx Adrsw Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical specifications: - Surface planer table width: 410 mm - Surface planer table length: 2,650 mm - Cutter block: 4x strip planing knives Rodpfxeykcymo Adrow - Motor: 3 kW - Planer fence can be tilted up to 45° The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Availability: short-term Location: 63934 Röllbach

Condition: used, Width 500mm 4 irons Tree protector 5.5hp engine Rjdpfjr Iqiqex Adrsw 380V

Condition: excellent (used), Year of construction: 1984, Working width 600 mm Planing height 200 mm Jointer table length 2100 mm Number of planer knives: 4 pcs. Feed speed 7 + 14 m/min. Machine weight approx. 1100 kg - Aigner auxiliary fence on the jointer fence - Machine stand in cast iron design - Thicknessing table with 4-way guide - Handwheel adjustment Rjdpfx Asy Db Rxodrjw - Bridge guard Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. Rjdpfxsy Egmuj Adrew (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Rodpfx Asyvt Exsdrow Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.