Used Linear Axis for sale (11,518)

Condition: used, Year of construction: 2014, CNC-controlled 5-axis machining center in gantry design for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC LED position display system for manual positioning of vacuum clamps and consoles. Positioning accuracy +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Cardanic 5-axis head for milling, drilling, and sawing at any angle. - Interface for HSK F 63 - Z-axis travel 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for maximum precision and long service life - Frequency inverter for electronic speed control 0–24,000 rpm - Maximum tool weight 6 kg incl. holder - Maximum tool length 230 mm from bottom edge of motor spindle - 18-position disc tool changer below Drilling head with 21 spindles, 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Total drill length: 70 mm Shank diameter: 10 mm Horizontal spindles: 4 One reinforced boring spindle with mount for grooving saw Ijdjxvaymepfx Ahvstd Max. drill diameter: 10 mm Total drill length: 70 mm Drill holder: 10 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller model: SIEMENS 840D, TECHNICAL DETAILS X-axis travel (longitudinal): 400 mm Iedpeyvq Sijfx Ahvetd Y-axis travel (cross): 250 mm Z-axis travel (vertical): 250 mm Resolution X, Y, and Z axes: < 0.1 µm Feed rate X, Y, and Z axes: max. 24 (48) m/min Rotary axis for workpiece (A-axis) Indexing mode resolution: < 0.0001° Speed range as rotary axis: max. 200 rpm Speed range universal rotary axis: max. 2,500 rpm Torque: max. 88 Nm Swivel axis for grinding head (C-axis) Swivel range: 225° Resolution: < 0.0001° Swivel speed: max. 360°/s Grinding spindle (motor spindle) Max. speed: 12,000 rpm Drive power: 15 kW Taper: HSK 50 E MACHINE DETAILS Control: SIEMENS 840D Drive technology: SIMODRIVE 611D Connected load: 30 A Number of axes: 5-axis EQUIPMENT GEA Multitron Junior air extraction system, year of manufacture 2008 Volmat FA-120S filtration system with cooling, year of manufacture 2008 Motoman MX100 industrial robot with control cabinet, 400V (not functional) Note: The machine has already been completely dismantled.

Year of construction: 2004, condition: used, Empty weight: 10.300 kg Serial number: 211/39 Weight: 10300 Kg X-axis 1100 mm Y axis: 600 mm Z-axis 600 mm Table: approximately 1300×600 mm Spindle with: ISO-40 take-up CNC control for precision milling Includes various parts and mobile workshop cabinet with contents Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Iedpfjyvqggjx Ahvotd

Year of construction: 2001, condition: used, Empty weight: 7.600 kg Serial number: 1050/67 Steering Gruppo Parpas AZ-102 Weight: 7600 kg X-axis: approx. 1050 mm Y-axis: approx. 500-600 mm Z-axis: approx. 500-600 mm Power: 15-22 kW Speed: approx. 4000 rpm Spindle mount: ISO 40 Table size: approx. 1000 × 500 mm Table load: about 800 kg Tool changer: approx. 20 positions Positioning accuracy: approx. 0.01 mm Repeat accuracy: approx. 0.005 mm Includes various tools, computer cabinet, mobile workshop cabinet, spare parts, manuals Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. Itodpfx Ajyvqgajhved The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2005, condition: used, Dimensions (LxBxH): 500 x 400 x 300 cm Equipped with hydraulic group Control D.Electron C15WRT 5 CNC axes simultaneously Linear motors and high accelerations X axis: approx. 1200 mm Y axis approx. 750 mm Z axis: 700 mm ATC tool magazine 30+ Including: mobile table Machine dimensions: approx. 5000x4000x3000 mm Siemens drives Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Itjdpfjyvqf Nox Ahvjd Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, XYZ CT 65LTY (Live Tooling & Y Axis) Siemens 828D Control Manufactured & Installed in 2022 Hydrafeed Multifeed Short Magazine Bar Feed Bar Support Unit VDI Live Tooling Holders Supplied Swarf Bin Supplied Machine Stroke: Max’ Swing 400mm Max’ Turned Dia’ 220mm Max’ Turned Length 490mm X Axis Travel 220mm Y Axis Travel 70mm (+/-35mm) Z Axis Travel 500mm Spindle: Spindle Nose A2-6 Spindle Bore (Drawtube Capacity) 65mm Spindle Speeds to 4,000rev/min Spinlde Motor 17kW Feeds: Rapids 20m/min Cutting 10m/min Slideway Type Hardened Boxways Turret: Turning Tool Shank 20 x 20mm Turret Type VDI 30 Power Turret No. Of Stations 12 Live Tool Max 4500rev/min Max’ Borning Bar Dia Ø32mm General: Tailstock MT4 Quill Dia’ 75mm Coolant Tank Capacity 80l Coolant Pump Delivery 30L/min Machine weight 4.4ton Footprint 3,300 x 2,270, 2,270mm/min Power Requirements 45amp Supplied with: Hydraulic 200mm 3 Jaw Power Chuck Hainbuch Collet Chuck & Collets Sauter ‘German’ VDI Turret Parts Catcher Through Tool & Flood Coolant Remote Electronic Handwheels USB Ports Networking Renishaw Automatic Tool Setting Arm Swarf Conveyor & Bin Programmable Hydraulic Tailstock For Sale Jet Machinery Ltd Jet Machinery Stock No: #79163 Machine Serial Number: STP20155 Cost: £72,500.00 + VAT Iodpfeyvqfpox Ahvstd Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2016, condition: used, Empty weight: 700 kg Dimensions (LxBxH): 465 x 589 x 341 cm Serial number: 62043 Applications: Milling, Turning (vertical turning function), Grinding, Drilling and tapping, Finish / deburring, Roughing of complex parts Chuck diameter: 700 mm Max turning diameter - passage: 1100 mm Power on main spindle: 40/30 kW: Control: Siemens Length: 4655 mm Width: 5890 mm Height: 3415 mm Weight: 17 ton Tool changer: yes Number of tools: 150 positions Cooling installation: yes X axis: 800 mm Y axis: 900 mm Z axis: 600 mm  Ijdpoyvqdrsfx Ahvjtd 5-axis movement: A-axis: -30° to +110° C-axis: continuous rotation  Multifunctional machining:: Vertical turning (turning) - maximum diameter 1100 mm, maximum workpiece weight 700 kg  Maximum turning capacity: Ø 1100 mm Maximum workpiece weight: 700 kg Table power: 40/30 kW Maximum table torque: 1500 Nm Maximum table rpm: 1000 rpm Hydraulic clamps on table Tool cone for turning: KM63 Tool magazine: 150 positions (24 positions for turning tools)  Spindle power: 55/40 kW Maximum spindle torque: 22 Nm Maximum spindle speed: 40 000 rpm (high-speed spindle) Tool holder for milling/grinding: HSK-E40 Tool magazine: 150 positions (126 for milling/grinding/drilling)  Controller: Siemens Sinumerik List of machine-mounted options: 40,000 rpm high-speed spindle table dia 700 mm with hydraulic clamping 150-position tool changer chip conveyor cooling system with recovery Coolant temperature control high pressure cooling (40 to 70 bar) by spindle fume extraction system chip collection box Pre-setting system and tool integrity: laser and mechanical probe for measuring tools Renishaw measuring head Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline...

Year of construction: 2016, condition: used, Empty weight: 16.500 kg Dimensions (LxBxH): 465 x 589 x 341 cm Serial number: 62044 Chuck diameter: 700 mm Max turning dia - passage: 1100 mm Power on main spindle: 40/30 kW: Control: Siemens Length: 4655 mm Width: 5890 mm Height: 3415 mm Weight: 17 ton Tool changer: yes Number of tools: 150 positions Cooling installation: yes Power: 90 KW X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 600 mm  Number of axes: 5 (X, Y, Z + A + C) controlled simultaneously A-axis rotation: -30° to +110° C-axis rotation: continuous Workpiece diagonal max: 900 mm diameter Max. distance spindle-table: 700 mm  Spindle intake: ISO/HSK-A63 Spindle power: approx. 40 - 54 kW Tool magazine: up to 150 positions  Table diameter: 700 mm Maximum table load: 1000 kg Hydraulic clamping: yes CNC controller: mostly Siemens Sinumerik Hydraulic group: yes Weight: 16500 kg Options fitted to this machine: 140,000 rpm high-speed spindle table diameter 700 mm with hydraulic clamping Tool changer with 3-150 positions chip conveyor cooling system with recovery Coolant temperature control high pressure cooling (40 to 70 bar) by spindle fume extraction system chip collection box Iodpfx Ahsyvqdljvetd Pre-setting system and tool integrity: laser and mechanical probe for measuring tools Renishaw measuring head Includes Online auction of a former tire mold manufacturing plant with high quality metalworking machines and tools (e.g. 3 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL forklifts), offices and other plant inventory, from the recent bankruptcy of Mecamold SA, the former Bridgestone tire mold plant in Herstal (about 10 minutes from Liège airport) in Belgium. The online auction opens Wednesday 4 February and closes Wednesday 25 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 12 March - Monday 23 March - Tuesday 24 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Isdpfxsyvqdfs Ahvjtd Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, total height: 2,570 mm, total length: 2,995 mm, total width: 2,190 mm, table width: 540 mm, table length: 900 mm, table load: 700 kg, rotational speed (min.): 8,000 rpm, GX- Performance VMC's Itsdpfxsyt Hnas Ahvsd Dr HeidenHain iTNC530 with HR 410 Handwheel  Coolant system Rigid sructure and superior reliability Central lubrication X - Travel: 800mm Y - Travel: 540mm Z - Travel: 540mm Table Length: 900mm Table Width: 540mm Table load: 700 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 20 Number of controlled axis:3 Chip conveyor: Yes Coolantsystem: Yes Length: 2995mm Width: 2190mm Height: 2570mm Weight: 4900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, Table size 320mm, Traverses X Y Z 400 x 560 x 400mm, Itodpfx Asyt Hd Iehvsd A axis +120/-30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, spindle taper BT40 24 station ATC, Siemens 828 control, swarf conveyor

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) Iodpsyvkuwofx Ahvetd - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system - Extraction unit

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 250,000 kg, overall weight: 400,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. Iedpfxeytrxke Ahvetd - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Year of construction: 2016, Manufacturer: EWAG AG Model: Laser Line Ultra Machine Type: 5-axis Laser Machining Centre Serial Number: 7195-0022 Release: 5 Year of Manufacture: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser Manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser Classification Machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating Voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Control Voltage: 24 V DC Rated Current: 17.3 A Connected Load: 12 kVA Max. Fuse Protection: 25 A (slow-blow) Wiring Diagram Number: 100211907 Extraction System: ULT LAS 200 Extraction System Documentation: complete Operating Hours: 35,788.02 h Note: Itjdpfx Ahjytrp Nsved Laser unit is defective and must be replaced Robot currently removed and being overhauled, optionally available Inspection under power possible

Condition: used, 1 unit 5-axis universal machining center MIKRON HBM 1350 with chip conveyor BÜRENER KFE 63/40-900 Z60, spindle and guideways worn in, self-dismantling required. Color: as shown, according to pictures and inspection. Condition: used. Storage location: production hall. Payment method: advance payment by bank transfer. Shipping: collection only from location in Regensburg. Isdeytqaajpfx Ahvetd

Condition: good (used), Year of construction: 2024, Linear Robot / Take-Out Robot SEPRO S5-25 med Manufacturer: SEPRO Robotique S.A.S. Model: S5-25 med Machine type: Linear robot / take-out robot for injection molding machines Serial number: R017622-01 Year of manufacture: 2024 Max. power: 1.5 kVA Weight: 100 kg Itodpfjytnxgsx Ahvod Voltage: 3×400 V to 3×480 V ±10 % Frequency: 50/60 Hz Short-circuit withstand: 10 kA Automation system manufacturer: SEPRO Robotique GmbH Automation project no.: R017622-01 G Customer installation no.: 6145 CE marking: present Location: Freiburg

Condition: ready for operation (used), The machine is ready for operation. Please refer to the video: The machine can be dismantled, loaded, and transported to your location for an additional charge. Basic Specifications Travel paths: X 710 / Y 520 / Z 520 mm Weight: approx. 5,500 kg Tool holder: SK40 or HSK-E50 Tool magazine: 24 positions (optionally 60) Spindle Standard: 12,000 rpm Option: 30,000 rpm Power: 10–15 kW (standard) / 15–20 kW (option) Axes & Feed Rapid traverse: 30 m/min Feed rate: up to 10,000 mm/min Resolution: 0.001 mm Itodpfx Ahsyu Tlzsvjd Positioning accuracy: 0.010 mm Tool Data Max. tool length: 315 mm (SK) Max. tool weight: 6 kg Magazine total weight: 80 kg (optionally 180 kg) If you have further questions, please feel free to send a message here, or contact us via WhatsApp or phone. The price is net, no warranty or returns, liability for defects is excluded, subject to prior sale and errors.

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm Ijdpfxoytha Do Ahvotd max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 Iodpfx Aeytcf Uohvjtd table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg • Tool magazine capacity: 60 pockets Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Technical Specification Iodpfxsyr Sc He Ahvotd Taper Size ISO 50

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 2,500 h, THIBAUT TC 625 – 5‑Axis CNC Bridge Saw (Used Machine) Description For sale is a THIBAUT TC 625 5-axis CNC bridge saw in very well-maintained condition. The machine is ideal for processing natural stone, quartz composite, ceramics, and similar materials, and is especially suited for kitchen countertop and interior fitting production. Technical Data Manufacturer: THIBAUT SAS (France) Model: TC 625 Machine Type: 5-axis CNC bridge saw Year of Commissioning: approx. 2020 Machine No.: 04.19 Voltage: 400 V / 50 Hz Spindle Power: approx. 13.2 kW Spindle Speed: 0 – 6,000 rpm Blade Diameter: 300 – 650 mm X-Axis Travel: approx. 3,970 mm Y-Axis Travel: approx. 2,300 mm Z-Axis Travel: approx. 500 mm Max. Material Thickness: approx. 200 mm Condition Machine powered – demonstration possible by arrangement Spindle hours: approx. 2,500 h Excellent technical and optical condition Iodpfx Asyuvhfjhvotd Regularly serviced Ready for immediate use Features 5-axis CNC control Tilting worktable 3,600 × 2,000 mm Table adjustment from 0° to 85° Additional unloading table 3,600 × 400 mm Digital camera for slab imaging Tool and material probing system Vacuum lifter up to 500 kg ACS plunge cutting system Tool water cooling Software T'CUT basic software Vacuum lifter manipulation module Vein matching module Contouring and trimming module CAD/CAM software eT'CAM Application Areas Kitchen countertops Bathrooms and washbasins Staircases Processing of natural stone and quartz composite Ceramics and similar materials Sales Information Price: on request Location: Germany Availability: by arrangement Inspection / Test Run: Machine is powered – test possible

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Iodpfx Asyr I Rtjhvotd Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, turning length: 2,260 mm, turning diameter over cross slide: 690 mm, turning diameter: 690 mm, spindle motor power: 40,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 115 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,260 mm, rotational speed (min.): 4,000 rpm, chuck outer diameter: 500 mm, spindle nose: A11, swing diameter over bed slide: 690 mm, tool length: 500 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 20,000 N, Equipment: rotational speed infinitely variable, Overhauled 5-Axis CNC Turning-Boring-Milling Centre WFL M60 Millturn / 2000mm with control Siemens Sinumerik 840D PL. YOC: 2004 The machine is completely overhauled, fully checked and fully working. The Turninmg -boring-milling und and the tailstock are completely refurbished. Milling spindle and spindle bearings are new. Cables and hydraulic hoses area also new. The machine geometry is within the original protocol values of a new machine (with measuring protocol). The machine is equipped with steady rest slide and tailstock (both with autom. Positioning and extremely rigid hydraulic clamping on the bed. Chuck and steady rest according to customer requirement (brand new items will be included). Chuck dia. Max. 500mm and steady rest max. 380mm opening dia. Tool system is HSK100 (external 90 station magazine with ATC). The machjine is equipped with glass scales for all linear machining axis. Furtthermore the machine is equipped with a 80 bar high pressure pump for deep hole drilling and 2t feed force for Z, X- and Y axis. The B-axis increment is 0.001° and is equipped with and additional indexing system with extremely high torque. Putting into operation and Training can be offered upon request. If rquired the outside colour can be adjusted according to customer requirements. Main spindle: 40kW (S1) Milling spindle: 25kW (S1) 4000rpm Tool system: HSK100 Magazin: 3x30 Plätze Itjdpsyuu A Ijfx Ahved

Condition: used, 1 piece 5-axis multifunction turning and milling center MAZAK INTEGREX 200Y with chip conveyor, tool holders, cutting tools, clamping devices, workbench 120x75x85 cm, 2 material cabinets, and various accessories, as per photos and inspection, self-dismantling required. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Storage location: production hall / left. Payment method: advance payment by bank transfer. Shipping: pickup only – no shipping offered for this item! Itjdpfx Aeyr H Taohvod

Year of construction: 2017, condition: used, 1 unit 5-axis machining center MAZAK VARIAXIS J-500 Travel X350 mm, Y550 mm, Z510 mm, with chip conveyor, workbench 130x70x85 cm, height-adjustable vise, work chair, tool holders, tool cabinet 50x50x100 cm, as per images and inspection, self-dismantling Color: grey/black Year of manufacture: 2017 Condition: used Isdeyr Htgopfx Ahvjtd Location of goods: production hall / right side Payment method: advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item!