Used Axis Module for sale (14,517)

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. Crjdpfx Aioz R I U Isiji ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. Codpfx Ajzvhlksiieri · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, - Year 2013 - Work hours: 6.044 uur - Lenght: 7,6 m • 4-axis machining (X/Y/Z and A), with a tilting range of 0–180°. • HSD milling spindle, 24,000 rpm, with HSK-63F tool interface. • Automatic tool magazine with 8 positions. • Machining enclosure that moves along with the gantry. • Control cabinet with an integrated cooling unit. • Minimum-quantity lubrication (oil mist) for the tool. Clamping and measuring • 8 pneumatic profile clamps mounted on motorized carriages, each with its own cable carrier. Since 2021, positions are entered manually. • Plastic clamping jaws . • Length-measuring system with a measuring plate and reference stop. Operation and safety • Mobile control console featuring a touchscreen, keyboard, and emergency stop, plus a handheld remote control on a cable. • Datalogic Gryphon GM4200 barcode scanner with charging station (2025). • Push-buttons for releasing the clamps (replaced in 2025). • 2 SICK light curtains, including foot pedals and signal lights. • Safety fencing around the machine: 13 panels and 6 posts. Software • EluCam control system. • eluCad/elusoft with CodeMeter license modules: 5ax, ncx, spm, and dgx (4 licenses). Csdpfx Aijz Eqxcsisri Tooling • 7 HSK-63F tool holders (with tools) in the magazine, plus 3 additional loose holders. • Approx. 30 milling cutters and drill bits, approx. 14 collets, a mounting block, a collet wrench, and a device for inserting and removing collets. • Spare clamping jaws, spare barcode stickers, and fuses.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Crjdpezhaqcjfx Aiisi

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Crodpfxezh U Sbs Aiiei Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Crjdjzh U Tfspfx Aiiei Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Cjdpfxoz Hc T Uj Aiisri Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: used, Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automates the isolation of nucleic acids within one hour. Viral RNA from 96 nasal swab samples can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput isolation of nucleic acids (DNA/RNA). It utilizes a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and re-suspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Cedoyk Uu Njpfx Aiisri Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: The particles are re-suspended by rotating the metal rods at up to 2,000 rpm, which enables high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled via the chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Cross-Contamination Protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic Dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Rod Heads: 96 Sampling Volume: 10 - 400 μL Number of Samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Structure Base machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (in the fully expanded configuration with rail system). Total space requirement: A fully configured system can occupy up to 2000 x 740 x 800 mm (L/W/H). You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Equipment: 3rd hydraulic function, Complete line for the production of stator and rotor packages, and an assembly line for assembling finished electric motors. The stator line consists of a manual workstation for producing packages, inserting slot insulation, inserting wedges, wire winding on a winding machine, a control machine, and a dielectric strength testing machine. The rotor line consists of a manual workstation for making rotor packages, a machine for applying insulating plastic, a machine for manual collector installation, a winding machine for wire winding, a manual workstation for rotor inspection, and a machine for rotor varnishing. Crodpfx Ajz Epz Noiioi Also included is an assembly line for assembling complete electric motors. The lines are sold in working condition and are ready for operation.

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT Cjdpozk Rdxsfx Aiisri SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: used, Year of construction: 2004, Matsuura MAM72-3VS 5 Axis Multi pallet Machining Centre (2004), Traverses X Y Z: 680 x 394 x 625mm, B axis -110/+ 65 degrees, C Axis 0.001 degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Fanuc G-Tech 16I Control, Through Spindle Coolant and Swarf Conveyor. S/No. 15738. Country of Origin: Japan Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Cedpo Ah Hcwofx Aiiori

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Specifications: Crsdpfx Ae Ahn N Usiisi Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Machine in very good condition, ready for production. From the original owner. This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system. Crodjz S Uptepfx Aiisi

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Cjdpfxs Ah T Nno Aiiori Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, FEELER VMP-1100 CNC Vertical Machining Centre with NIKKEN CNC202 FA 4th Axis Year 2012 Control FANUC 0i-MD Table size 600 x 1200 mm Travels XYZ 1100 x 610 x 600 mm Spindle nose to table 137 - 735 mm Spindle centre to column 660 mm Spindle speeds to 10000 rpm Spindle taper BT 40 Spindle motor 18.5 kW Number of tools 30 ATC Rapid traverse X & Y 36 m/min, Z 24 m/min Weight 6800 kg Supplied with: BLUM Tool Probe, Swarf Augers, Rear Swarf Conveyor, Spindle Chiller, Filtermist FX5002, Tooling Package. NIKKEN CNC202 FA 4th Axis complete with 200 mm Diameter Faceplate, 135 mm Centre Height, 115 mm Riser Block, Tailstock and Mounting Sub Plate/Table. Crsdpfoz R Tn Hsx Aiisi For sale with Jet Machinery Ltd Jet Machinery Stock No: #27003 Machine Serial Number: VNJ1074 Cost: £34,950.00 + VAT

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 901014, total height: 350 mm, total width: 400 mm, total length: 1,000 mm, overall weight: 250 kg, 5-axis rotary table HAAS TR160-H We have noticed that the table is losing air pressure. Codpfx Ao Ahpl Ejiiori The table always blows some air for the clamping function, but it blows too much. It could be a valve, which we have already ordered, but it could also have another defect. Otherwise, the table functions properly. We have occasionally used the table as a positioning axis. For sale due to business closure. Videos of the positioning process, etc., can be created via WhatsApp.

Condition: good (used), Year of construction: 2014, Spinner MVC1000 machining center, with 4.axis Year: 2014 Technical details: Travel X/Y/Z: 1000mm/500mm/570mm Table dimensions X/Y: 1200mm/500mm Max. workpiece weight: 800kg Csdpez Rvixsfx Aiieri Distance from spindle nose to table: approx. 120-690mm Tool holder: SK40 Max. spindle speed: 10000rpm Tool magazine: 24 positions Max. tool diameter: approx. 80mm Max. tool length: approx. 300mm Max. tool weight: approx. 7kg Rapid traverse X/Y: 24m/min Rapid traverse Z: 20m/min Control: Heidenhain TNC 620 Space requirements X/Y/Z: approx. 2700mm/2550mm/2770mm Machine weight: 5100kg Accessories/options: - 4.axis rotary table - Blum measuring system ( touch probe is missing ) - documentations - Swarf conveyor - Through spindle coolant - Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: like new (used), Year of construction: 2019, Various spare parts for Chiron BAZ Rotary tables Axles Credpfxoz I T Acj Aiiei Ball screw and more

Condition: excellent (used), Year of construction: 2022, operating hours: 8,703 h, functionality: fully functional, machine/vehicle number: G2713-0032, overall weight: 6,800 kg, Hello. I have a 5-axis CNC milling center, a HYUNDAI KF3500/5A, for sale. The machine is connected and operational. It is in perfect technical condition!!! Low operating hours!!! Only 8703 hours. I have owned the machine since it was new!!! I am the first owner!!! _ Type: 5-axis Milling Center Manufacturer: HYUNDAI Wia Model: KF3500/5A _ 5-Axis Control: HYUNDAI WIA FANUC i Series _ SMART Plus Country of origin: South Korea Year of manufacture: 2022 _ Crodpfe Adqltox Aiioi Machine parameters: – Number of axes: 5 – Work table dimensions (length x width): Fi-400 x 335 mm _ 250kg – Maximum spindle speed: 15,000 [rpm] – Tool magazine: 30 pcs. BT40 – Tool measurement probe – Workpiece measurement probe – Spindle power: 18.5/11 [kW] – Axis travel (X/Y/Z) mm: 600/655/500 – A-axis travel = 150° – C-axis travel = full 360° – Rapid traverse speed (X/Y/Z) [m/min]: 36/36/30 – Total power: 25 kVa – Total weight: 6800 kg – Chip conveyor – Oil mist separator

Condition: like new (used), Year of construction: 2021, operating hours: 5,100 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,175 mm, controller model: Heidenhain 640 control, overall weight: 37,500 kg, spindle speed (max.): 30,000 rpm, operating hours of spindle: 5,100 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 120, We offer in good condition Grob G750 Gen1 from 2021 with only 5100 spindle hours. X-Axis travel: 1000 mm Y-Axis travel: 1100 mm Z-Axis travel: 1175 mm With following options: HSK-A63 120 tools ATC 30.000 RPM Spindle Internal coolant 80 bar Touchprobe Heidenhain TS460 Blum Laser Kinematic quick set Crsdpfx Aij Af Uxusioi including LANG Vices

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. Crsdps Agnz Njfx Aiisi An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Year of construction: 2013, condition: good (used), Ref. -No.: 10717 Manufacturer: POSMILL Type: H 800U Year of construction: 2013 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Credpfx As Ahw R Njiiji Machine number: 2013xxxx X-Travel: 700 mm Y-Travel: 820 mm Z-Travel: 600 mm Tool Taper: HSK-A 63 Tool places: 96 Spindle Speeds: 18.000 RPM Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 25072, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: DELSY EASYCOM, controller model: EASYCOM 4AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,900 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm -Thickness plate roll 6 mm Credo Ahgwijpfx Aiioi -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital position readout of the 4 rollers for automatic programmable control and/or manual bending use by operator. Opening hydraulic drop-end machine front for the unload of fully round bending. Variable working speed fast-slow controlled Safety installation with emergency stop. Instruction manuals for operation and service.

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Code Ah Uabjpfx Aiiori Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: used, Year of construction: 2018, controller manufacturer: Heidenhain, controller model: TNC 620, _____ Description: Year of manuf. : 2018 Control : Heidenhain TNC 620 Speed : 12000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK 40 In General: Year of manufacture:2018 Control system:Heidenhain TNC 620 Travel ranges X/Y/Z:500/450/400 mm Spindle speed:12,000 rpm Tool holder:SK 40 Spindle: Technology:Inline direct drive Credpfx Aio Ah Ndcsisi Speed:12,000 rpm Power:13 kW Torque:83 Nm Tool holder:SK 40 NC swivel table: B-axis:+110°/ -5° C-axis:360° Clamping surface:630 x 500 mm Max. table load:200 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:30 Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Position Sensors:Direct scales on all axes Chip Removal:Chip conveyor Coolant Supply:Internal cooling, 12 bar Workpiece Measurement:Renishaw PP40 infrared probe Tool Measurement:Renishaw TS27R tool probe Kinematics measurement:3D quickSET Setup mode:Electronic handwheel