Used Lever Plate Shear for sale (14,856)

Condition: excellent (used), Guillotine shears Amada GPX 630 made in France Manufacturer: Amada Type: GPX 630 Condition: used cutting length max: 3050mm normal steel: 6,35 mm NC backgauge: 1000mm number of hold-downs: 16 housing dimensions: 3750 x 2000 x 1850 mm weight: ~ 6500kg Scope of delivery: guillotine shear Amada GPX 630 Itjdpfx Asxwmumoh Nob

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Itodpfxoxwmuge Ah Njb Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function Itsdpfx Ahoxz Hg Dj Neb - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Year of construction: 2021, condition: new, - Capacity 1350 x 3 mm - Manually operated back gauge - Foot-operated - Photocell protection of the back gauge - Raised arms - Illuminated cutting line Itjdpfx Aeg Tmz Uoh Nob - Brake motor - Emergency stop - Documentations - 400V

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Iedpfx Ahsu Utaio Netb Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm Itedpjxu Nrpsfx Ah Nob front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Itjdpfx Aoua Iuleh Nob Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm Ijdpfxenl D Tfe Ah Nstb sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Iodpfx Ahjxtpwvo Nstb Model: VS 430 6 Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Adjustable cutting angle

Condition: used, sheet width 2000 mm Iodpfxsxfwdzs Ah Netb plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter • Folding finger guard Itedpfxoxrtxus Ah Nsb • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 Ijdpfexrp Thjx Ah Nstb stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Isdpfx Ahsxrf Hwe Netb Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 12 mm distance between columns 3120 mm back stop - adjustable 20 - 750 mm true cutting angle adjustable 0,5 - 3,0 Grad cutting length 300 - 3000 mm connected load 22 kW weight of the machine ca. 10,5 t dimensions 4,1 x 2,3 x 2,1 m Hydraulic guillotine shears with: - Digital display for back gauge - Cutting gap adjustment - Cutting length adjustment - Emergency stop device - Angle stop and front sheet metal supports Itodpfx Asxwzc Eeh Nsb - 3 sets of spare blades - foot switch - documentation

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops - Support table with ball rollers Iodpfoxwvptjx Ah Njtb - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. Ijdpowd Ebzofx Ah Njtb If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. Itsdpfx Ahottv Ecj Neb If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1976, Hydraulic guillotine URSVIKEN with automatic backstop, fully functional. Specification: Model: URSVIKEN Year: 1976 Made in: Germany Working length: 2,500 mm Max cutting thickness: 6.0 mm Backstop: automatic Iedpfx Ahjwdvrwo Nstb Weight: 3,000 kg If you have any further questions, we will be happy to answer them.

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - throat 50 mm - Backgauge with ball screw 1000 mm - Plastic inserts for hold down (material protection) - 1 side stop L= 1500 mm, with scale & T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop - Table plates with ball rollers - Infinitely adjustable cutting length - manual cutting gap adjustment - automatically tiltable backgauge - cutting line illumination - upper knife can be rotated twice and lower knife four times special accessories: - Light curtain for finger protection - throat 350 mm - Throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Rear sheet guide - Back gauge 1250 mm - Hydraulic anti-rotation device for SBT 3016 and SBT 4013 - additional supporting arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot with vertical support - ball in side stop or in support arms - adjustable angle stop 0-180 - CNC controlled motorized cutting gap adjustment - laser cutting line - spare knives - 1 set of upper and lower knives - oil cooler - special painting - Control panel on the other side - oil heating - control panel air conditioning DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input Control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs Ijdpfx Aen Urhvjh Nstb - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: new, Standard equipment - EZM9910 control unit (standard on MS 2004, 2504, 3004) - 550 mm manual backgauge (standard on 1303, 2003, 2525) - 750 mm motorized backgauge programmable via control unit (standard on 2004, 2504, 3004) - plastic inserts for hold-downs (material protection) - 1 side stop and 2 sheet support arms - finger protection - portable foot switch with emergency stop - spring-loaded stop in T-slot of support arms (standard on MS 2004, 2504, 3004) - ball screw (standard on MS 2004, 2504, 3004) - Table plates with ball rollers (standard on MS 2004, 2504, 3004) - Upper and lower knife can be rotated twice (MS 1303, 2003, 2525) - Upper knife can be rotated twice and lower knife four times (MS 2004, 2504, 3004) Optional accessories: - D-Touch 7 touch screen CNC control unit - 750 mm motorized backgauge programmable via control unit (option on MS 1303, 2003, 2525) - 1000 mm motorized backgauge programmable via control unit - pneumatic sheet holding device - adjustable angle stop 0-180 - additional support arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support Isdpfxjn Tpifj Ah Njtb - Side stop extension L= 3 m with vertical support - Cutting line light (for MS 2004, 2504, 3004) - Spare blades 1 set of upper and lower blades - special painting control unit: EZM9910 control unit (standard on MS 2004, 2504, 3004) DURMA D-Touch 7 (option) - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - User friendly - Fast data input - Easy connection - Unlimited material types Are you interested in this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - CNC-controlled motorized cutting gap adjustment via upper knife (up to VS 4013) - CNC-controlled motorized cutting gap adjustment via lower knife (patented) (from VS 4016) - Plastic inserts for downholder (material protection) - variable cutting length adjustment via CNC - Cutting reel adjustment via CNC - Table plates with ball rollers - backgauge on ball screws 1000 mm - folding up finger guard to 1000 mm - 1 side stop L= 1500 mm, with scale, T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop (up to VS 3020) - 3 support arms L=1000 mm, with T-slot & tilt stop (from VS 4006 to VS 4020) - 5 support arms L=1000 mm, with T-slot & tilt stop (from VS 6006 to VS 6016) - Cutting line illumination - Upper and lower knife can be rotated four times (4 sides can be used) Special accessories: - Light curtain for finger protection - throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Sheet metal holding device with conveyor belt and scrap container - CNC material feeding system - rear sheet metal chute - backgauge 1250 mm - Hydraulically liftable backgauge - X1, X2 axis control - adjustable angular stop 0-180 - additional supporting arm L= 2 m with vertical support Iodpfx Ahjn Ut Stj Nstb - additional support arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot and vertical support - Ball in side stop or support arms - CNC front feed system for 3 meters - Laser cutting line - Spare knife (standard upper and lower knife) - Spare knife (upper and lower knife especially for stainless steel) - Oil cooler - Hydr. twist minimization for narrow sections - Central lubrication manual - Central lubrication motorized - Special painting - Control panel on the other side - Oil heating - Control panel air conditioning control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Itjdpfx Asxpuipoh Nsb

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Itodpfx Asxvinmoh Njb Please feel free to contact us for a quote.

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm work height max. 930 mm Itodpjxpi Dhsfx Ah Nsb

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm Ijdpfx Ajxpi Dbeh Njtb work height max. 880 mm cutting angle 1°30 ° rear stop 750 mm