Used Lever Plate Shear for sale (12,741)

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs Ncjdpfx Afjycxgmsaer ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Year of construction: 1980, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 6mm. Nodpfxemgcnle Afajcr

Year of construction: 1997, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. Nodsgcbpgopfx Afaecr

Year of construction: 1997, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. Ncsdpfx Afsgcbpksajr

Year of construction: 1998, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t. Nsdpfsgcbpcox Afajcr

Year of construction: 2013, condition: ready for operation (used), A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible. Njdpfexph R Tex Afascr

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Nsdpfx Afoya Hwzoaocr

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Ncjdoxc Nikepfx Afajr

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Nsdpfx Aext Rk Djfaocr

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Ncjdpox Hfgvjfx Afaer

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Ncedpfxjx Hz Nys Afajr

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW Ncjdpfjyanqvjx Afaor -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. Ncjdpfx Afsx Da D Ujasr — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Nedpfjuddh Aox Afajcr Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, Year of construction: 1980, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons Nedpfx Afjg Twmhjajcr

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien Ncodpfeyackwjx Afaer 24900 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9,5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: used, Year of construction: 1980, sheet width 3,5 mm Ncsdpfx Afjyacpmjaor cutting width 3050 mm weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg Equipment: · Manual back gauge Ncedpfstvfzcex Afaer · Cutting gap adjustment · Cutting angle adjustment · Cutting line illumination

Condition: used, Year of construction: 1962, Working length: 1020 mm Sheet capacity max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm Ncodjrh D Ttepfx Afajr

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t sheet width 3150 mm sheet thickness - max. 16 mm Ncjdpfx Aex U A Hvsfajr sheet width - min. 1,6 mm voltage 400 V range - high tensile 3950x2475x2520 mm

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm Nedpfx Afoq Dta Ioajcr plate thickness . mm 8mm distance between columns . mm

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device Nsdpfx Ajv Tzphsfajcr - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - CNC-controlled motorized cutting gap adjustment via upper knife (up to VS 4013) - CNC-controlled motorized cutting gap adjustment via lower knife (patented) (from VS 4016) - Plastic inserts for downholder (material protection) - variable cutting length adjustment via CNC - Cutting reel adjustment via CNC - Table plates with ball rollers - backgauge on ball screws 1000 mm - folding up finger guard to 1000 mm - 1 side stop L= 1500 mm, with scale, T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop (up to VS 3020) - 3 support arms L=1000 mm, with T-slot & tilt stop (from VS 4006 to VS 4020) - 5 support arms L=1000 mm, with T-slot & tilt stop (from VS 6006 to VS 6016) - Cutting line illumination - Upper and lower knife can be rotated four times (4 sides can be used) Special accessories: - Light curtain for finger protection - throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Sheet metal holding device with conveyor belt and scrap container - CNC material feeding system - rear sheet metal chute - backgauge 1250 mm - Hydraulically liftable backgauge - X1, X2 axis control - adjustable angular stop 0-180 - additional supporting arm L= 2 m with vertical support - additional support arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot and vertical support - Ball in side stop or support arms - CNC front feed system for 3 meters - Laser cutting line - Spare knife (standard upper and lower knife) - Spare knife (upper and lower knife especially for stainless steel) - Oil cooler - Hydr. twist minimization for narrow sections - Central lubrication manual - Central lubrication motorized - Special painting - Control panel on the other side - Oil heating - Control panel air conditioning control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter Ncjdpfx Ajn Ut Stjfaor - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - throat 50 mm - Backgauge with ball screw 1000 mm - Plastic inserts for hold down (material protection) - 1 side stop L= 1500 mm, with scale & T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop - Table plates with ball rollers - Infinitely adjustable cutting length - manual cutting gap adjustment - automatically tiltable backgauge - cutting line illumination - upper knife can be rotated twice and lower knife four times special accessories: - Light curtain for finger protection - throat 350 mm - Throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Rear sheet guide - Back gauge 1250 mm - Hydraulic anti-rotation device for SBT 3016 and SBT 4013 - additional supporting arm L= 2 m with vertical support - additional supporting arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot with vertical support - ball in side stop or in support arms - adjustable angle stop 0-180 - CNC controlled motorized cutting gap adjustment - laser cutting line - spare knives - 1 set of upper and lower knives - oil cooler - special painting - Control panel on the other side - oil heating - control panel air conditioning DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input DURMA D-Touch 7 7 inch color touch screen USB interface Ethernet: RJ-45 10/100M Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness Creation of programs Cut counter User friendly Fast data input Control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately! Ncjdpfxen Urhvj Afaor

Condition: good (used), functionality: fully functional, Year of construction: 1990, We are selling a used guillotine shear from Stanko with a cutting width of 2000mm and a material thickness of 6mm. The machine is powered and can be tested. Crane loading is possible. Ncjdpfx Afowywmhjajr