Used Lathe Shaft for sale (11,058)

Condition: reconditioned (used), Year of construction: 2007, Self-learning lathe, 230x1000; refurbished machine with general inspection and adjustment, and replacement of screws and bearings on the Z-axis and bearings on the X-axis. Pgjdpfsv Nquljx Amyop Bar passage: 58mm CNC: FAGOR 8055 Year of manufacture: 2007 Complete with: Self-centering chuck Chip conveyor Manual tool turret with CAPTO C4 interface Toolholder set Collet set Manuals and CE certificate

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper Pgedpfswr Dhcox Amyop

Condition: good (used), Serial No. 6511137 Available 12/2026 Podozqdndopfx Amyogp

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Pjdpfxoy H Ezgj Amyegp

Year of construction: 1990, condition: used, Mazak QT200 turning center. Pedpfxjzqc Hfo Amyjgp

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. Pgedpfxey Udcfe Amysp The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm Podpfx Amjzd Sg Ijyegp bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Conventional lathe with guide and draw spindle, MAZAK. Pgsdpfjzqck Dex Amyop

Condition: used, AMC P240R lead and feed screw lathe, center distance 1,250 mm. Psdezqckkspfx Amysgp

Condition: used, Year of construction: 2024, operating hours: 25 h, Caterpillar engine (kW/HP): 340 / 460 Discharge height: 2,898 mm (tracked version) Discharge height: 1,830–4,151 mm (at 35°) Shredding unit: Pedpezqbhnsfx Amyegp • Screen basket: 250 mm (other sizes available, including 80 / 100 / 125 / 150 / 180 / 250 / 300 mm) • Roller speed (min⁻¹): – Hydraulic drive, max. 32 • Roller length: 2,820 mm • Roller diameter: 610 mm Throughput, depending on the material: up to approx. 60 t/h Weight: approx. 25.7 t Transport dimensions – L × W × H (mm): 6,940 × 2,854 × 3,268 (tracked version) Working position L × W × H (mm): (conveyor belt 35°): approx. 11,372 × 3,290 × 4,151 Further features: Slow-speed, 2-shaft shredder for wood and green waste Very well suited for green waste, tree stumps, and all types of wood waste, as well as old wood Optional screen baskets available upon request: 80 mm round, 100, 125, 150, 180, or 250 mm (among others)

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Psdpfxoxgryms Amyegp Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: good (used), Colchester Master 2500 Pjdpszp U Apjfx Amyogp In good condition. Includes some accessories. Transport can be arranged.

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM Podpfx Aezp Uz Sjmyegp In very good condition. Includes accessories as shown in the pictures. Transportation can be arranged.

Condition: excellent (used), spindle bore: 36 mm, total length: 1,600 mm, total width: 700 mm, total height: 1,400 mm, spindle speed (max.): 3,550 rpm, Weiler Matador VS1 in very good condition. Includes accessories as shown in the pictures. Pjdozp Uzlspfx Amysgp Transportation can be arranged.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . Pgedpfxozp Uw Hj Amyjp .. Ongoing purchase of used German machines without NC or CNC control .

Condition: used, Year of construction: 2004, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2004 Control : Siemens 840D - Powerline Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping I:Collet chuck, SMW Autoblok Spannax Gr. 65 Workpiececlamping II:3-Jaw chuck, SMW Autoblok KNCS-N 260-72 : Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Pgedpfx Amoznqyzjyep Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, Bristol EF Toolholder:Misc. static and driven toolholder Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - ShopTurn, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - ShopTurn Turning diam. : 300 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):13 kW Torque (max.):100 Nm Barcapacity:45 mm Workpiececlamping I:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Workpiececlamping II:Collet chuck, SMW Autoblok Gr. 52 Subspindle: Pgedpfjznqyuox Amysp Technology:Motorspindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):42 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 140-35 Ejector:Pneumatic Movement in Z:510 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:160/70/510 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Electrostatic extraction, UAS SMOG HOG Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 828D, _____ Description: Year of manuf. : 2012 Control : Siemens 828D Turning diam. : 280 mm Turning length : 558 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):15 kW Torque (max.):179 Nm Barcapacity:65 mm Workpiececlamping I:Collet chuck, Ortlieb TS 65/6D Workpiececlamping II:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Subspindle: Technology:Motorspindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):48 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Movement in Z:650 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT Tooldrive:4.000 rpm Movement in X/Y/Z:260/110/620 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure Toolmeasurement:Automatic Measuringarm, Renishaw RP 3 Rawmaterialfeed:Barloader, MKE HL 12 pneumatic Finishedpartremoval:Partstray with conveyor belt Oilmistseparation:Mechanical extraction, Sara UC1 SD Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers Pgedpfxoznqyns Amyjp

Year of construction: 1985, condition: refurbished (used), LATHE GEMINIS GE 650 Pgjdpfx Ameggly Soysp -LENGHT 4200mm -HOLE 85mm -DIAMETER ON SLIDES 650mm -DIAMETER ON SUPPORT 400mm

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories Pjdpfx Aow Dvv Asmyjgp - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Pjdpfsznnl Ijx Amyogp Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Pjdeznnf Uopfx Amyegp V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2021, condition: used, total length: 1,700 mm, total width: 3,600 mm, Colour: White Empty weight: 3.500 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 3121880 - Drive system: CNC - Control system brand: Haas - Power [kW]: 12.2 - Centre height [mm]: 206 - Swing over bed [mm]: 419 - Carriage turning diameter [mm]: 356 - Distance between centres [mm]: 406 - Spindle bore [mm]: 44 - Min. spindle speed [rpm]: 0 - Max. spindle speed [rpm]: 6000 - Max. workpiece weight [kg]: 34 - Options: Chip conveyor - X-axis travel [mm]: 200 - Z-axis travel [mm]: 406 - Transport dimensions: 1700mm x 3600mm x 2mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Podpfx Aoznmp Esmysgp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2013, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 Pgsdpfx Amjznmlgjyep - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Quick-change tool post, Fixed steady, Digital readout, Removable bed - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA Pgedpodzqm Refx Amysp - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards