Used Laser Marking Systems for sale (40,369)

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Ijdpfeu Thcvsx Adnea Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Capacity: 8,000 bph Formats: 0.75 L bottles Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection Dimensions: 318 × 152 × 235 cm Weight: 1,022 kg Scope of Delivery  Main bottle bottom inspection module Mouth integrity control Wall inspection Washing liquid residue detection Push expulsion Progressive expulsion CIP Astigarraga   Ijdpfx Adjxfccisnja

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,000 h, machine/vehicle number: -, laser hours: 1,200 h, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, positioning speed: 72 m/min, repeat accuracy: 0.01 mm, workpiece weight (max.): 1,000 kg, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 6,500 kg, total length: 6,200 mm, working range: 3,050 mm, Equipment: cooling unit, Used Holly Laser 3015 3kW Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y-axis positioning accuracy: ±0.01 mm Iodpfxswcwq Sj Adnsa - Power: 3.0 kW - Source brand: Raycus from 2024! - Raytools Auto Focus cutting head - Fuije servo motors - The computer runs Windows and the CypCut software, which offers, among other features, design, file import and export, and work optimization. Installed programs have lifetime licenses. Cutting Thickness - Carbon steel: recommended thickness 20.0 mm - Stainless steel: recommended thickness 8.0 mm - Aluminum: recommended thickness 6.0 mm - Brass: recommended thickness 5.0 mm

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module Iodpfjv Ikvgsx Adnoa 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: new, Year of construction: 2024, machine/vehicle number: BN20XS "Standard", shaft length: 1,064 mm, workpiece weight (max.): 5 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, working range: 70 mm, overall weight: 30 kg, warranty duration: 12 months, height adjustment type: electric, sheet thickness aluminum (max.): 3 mm, door opening width: 400 mm, door opening height: 350 mm, travel distance Z-axis: 100 mm, JEWELliner "XS2" model series "Standard" with 20W CW laser power. Isdpoppxlmofx Adnoa - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L50xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - optional ring inside (f.e. name, date, symbol, handwrite) optional - optional ring outside (f.e. name, endless graphic, endless pattern) optional - optional bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS2" ( BN20XS2-HR ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 100x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software - rotation axis Specification: - laser technology: fiber laser - outputpower CW: 20W - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 70 x 70 mm – smaller possible - focus range: ca. 1.0 mm - min character high: 0.15 mm - min. line width: 0.020 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L500 x W400 x H500 mm - weight: 38kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, laser source manufacturer: Coherent, laser hours: 910 h, laser power: 350 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, working length: 3,000 mm, working width: 2,000 mm, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SEI Laser Mercury 2030 with Coherent CO₂ Tube, incl. TEKA Extraction System & Icaro Backlight Software & Camera with Registration Mark Detection + Second Cutting Head for Metal Processing – Precision Large-Format Laser Cutting System For sale is an SEI Laser Mercury 2030, equipped with a powerful Coherent CO₂ laser tube, a high-quality TEKA extraction and filtration unit, as well as the original SEI Icaro Backlight control software. This machine delivers precise results in large-format cutting—ideal for demanding applications in sign making, acrylic processing, and metalworking. Technical Specifications: Manufacturer: SEI Laser Model: Mercury 2030 Isdew Rp Htopfx Adnsa Laser Source: Coherent CO₂ tube Laser Power: 350 W Working Area: approx. 2000 × 3000 mm Control: CNC / SEI Icaro Backlight Software Extraction: Includes TEKA filter unit with pre-filter and activated carbon filter Condition: used, well-maintained, fully functional Availability: immediately Features & Equipment: Class 4 laser thanks to fully enclosed work area Rugged industrial design for continuous operation Coherent CO₂ laser tube – low-maintenance and reliable Icaro Backlight control – ideal for backlight, engraving, and cutting applications Second cutting head for metal processing Includes camera system on the cutting head for registration mark detection High cut quality – clean edges even with intricate shapes Large-format processing of materials such as acrylic, MDF, wood, cardboard, plastics, paper (incl. materials library) High-performance TEKA extraction and filtration for clean workplace air Exact machine hours will be provided upon request. An on-site inspection is possible by appointment. A test run can be carried out on site.

Condition: used, Year of construction: 2018, Diesinking / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Iodpevtftwofx Adnja Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity Isdjrwwzyepfx Adnja • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Iedpfx Aderf U Enjnoa Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: excellent (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, laser power: 100 W, type of cooling: water, laser wavelength: 10,600 nm, For sale: Trotec Laser GS1000 Engraving Machine – 100W CO₂ Brand: Trotec Model: GS1000 Year: 2015 Power: 100 Watts Iedew S Dcropfx Adnoa Laser Type: CO₂ Cooling: Water-cooled (chiller included) Operating hours: Approximately 1000 hours Condition: Very good – regularly serviced and fully operational Working area: 500x500mm Description: Professional Trotec Laser GS1000 machine, ideal for fast engraving and cutting on organic materials (wood, leather, acrylic, cardboard, paper, textiles, etc.). Fitted with a 100W CO₂ laser tube, this machine offers speed, precision, and reliability for manufacturing workshops, signage, personalized items, and prototyping. Featuring an integrated computer with an external display, making machine operation simple directly from the workstation. Key features: - Water cooling with included chiller - Integrated PC + external monitor - Resolution up to 1000 dpi - Autofocus - Interface: USB / Ethernet - Compatible with major CAD/CAM software (CorelDraw, Illustrator, AutoCAD, etc.) Fume extraction not included Included with the machine: - Speedmark control software - Chiller (water cooling) - Screen + integrated PC - User manual - Basic maintenance kit General condition: Machine well-maintained, 1000 operating hours, stored in a clean workshop. Fully functional and ready for immediate use. Location: Bordeaux / France Shipping: Collection or shipping possible Availability: Immediate

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass Isdpfoc Rmy Nex Adnja - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Year of construction: 2021, condition: used, Width of the rolls; ±60 cm. Length of the inspection belt; ±275cm Isdpfx Adsxiw Nxsnja

Condition: used, Year of construction: 2018, Wire erosion / EDM Ijdpfx Adjvtftkenoa 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency inverter (adjustable speed) Iodpfoxiwg Rox Adnea Complete with original manuals and diagrams

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) Iedsunh H Sopfx Adnoa - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Shows slight signs of wear (see pictures) Iodpfx Adswm Il Uensa

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 35 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 12,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 10,000 mm, space requirement width: 2,550 mm, Equipment: cooling unit, safety light barrier, Our flagship model: G3015 HF Expert 12KW Fiber Laser Cutting Machine The price includes delivery, installation, training, CAD-CAM software, and filtration system. Machine location: Germany. Delivery within Germany is free of charge. The HF Expert is one of our highest-quality and most compact fiber laser cutting machines. It is the perfect entry into professional laser part manufacturing and serial production. Han’s Laser stands out with utmost precision, robust industrial quality, and state-of-the-art fiber laser technology, and ranks among the industry’s leading manufacturers with around 17,000 employees and over 100,000 machines sold worldwide. This machine is ideally suited for steel fabricators, sheet metal workers, and series production facilities looking to cut up to 50 mm steel with 12 kW laser power while minimizing post-processing requirements. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a similar plasma system or CO2 laser system with the same cutting capacity. Ijdov Nzt Eepfx Adnja German customer service in NRW (Rhineland region) with 400m² parts warehouse. German-speaking telephone and on-site support with short response times. All our machines are installed and serviced by us. 80% of the machine’s components are German or European-made. 1.5 x 3 m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions: Length [mm]: 10000 Width [mm]: 2550 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW Cutting capacity at 6 kW: Steel - 25 mm, Stainless steel - 18 mm, Aluminum - 18 mm Cutting capacity at 12 kW: Steel - 35 mm, Stainless steel - 35 mm, Aluminum - 25 mm • Fully enclosed for laser safety • Compact design reduces shipping costs and shortens installation time • Improved accessibility with side sliding door running the full length • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to powerful control and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response with “Remote Service” • Fully enclosed machine with OD5+ laser safety windows • Small footprint • Versatile operation with adjustable control panel, front door, and side sliding door Higher Dynamics & Productivity • The optimized machine bed and extruded aluminum portal, equipped with the fast real-time Han’s 901 controller (Rexroth) and powerful Rexroth motors, enable the HF Mini S to reach extremely high speeds and acceleration. Configuration and component selection: Control system: Han’s 901 (Rexroth, Germany) Servo drivers: Rexroth, Germany Cutting head: Precitec, Germany Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Exchange table: Han’s, China

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Iedpovgvlkefx Adnja Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Iedpfxevtftqo Adnja Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Iodpfx Adjxfrv Eonsa Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI Ijdpfxsvgvhxe Adnsa This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: new, laser power: 3,000 W, travel distance X-axis: 200 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 300 mm, DESCRIPTION K12C Two-chuck High-speed small tube laser cutting machine The K Series high speed small tube laser cutting machine, independently developed and produced by Baison Laser, is specifically designed for the high-speed cutting of a large batch of small metal tube materials in various sizes and shapes. It reliably cuts a variety of metal tubes, including round, square, rectangular, I-beam, angle iron and special-shaped tubes, crafted from stainless steel, carbon steel, and other metals. Technical specifications Tube size range "Round tube: φ10-φ120mm
 Square tube: □10*10-□120*120mm (> R10 mm)
Channel Steel: 8#（need nesting software and specialized work-holding fixtures） 
 Angle Iron: 8#（need nesting software and specialized work-holding fixtures）" Laser Power: 3.000 W (Raycus) Max. Single Tube Weight: 80 kg Chuck Stroke: Full stroke Ijdpfx Aexfrlasdnea Max. chuck speed: 180 r/min Max Speed: 100 m/min Max Acceleration: 1.5 G Max.Tube Cutting Length: 6.500 mm Tail Material: ≥60 mm X-axis: 200 mm Y-axis: 6.500 mm Z-axis: 300 mm Positioning Accuracy (X/Y): ±0.03 mm/m Repeated Positioning Accuracy (X/Y): ±0.03 mm Power Data: 19.8kw/51A Power supply: 380V/50Hz/3Phases Machine Size: 9.550*1.850*2.135 mm Machine Weight: 3.250 kg (Including automatic loading frames)

Condition: new, functionality: fully functional, DESCRIPTION Iodpfjxfrhnsx Adnea SH3 Fully-enclosed Fiber Laser Cutting Machine The SH Series is a Fully-enclosed Fiber Laser Cutting Machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thin sheet metals. Technical specifications Features • Fully Enclosed Protective Cover design also on the back side of the machine according to CE; • Electric Control for door and platform with back pannel control with emergency button; • Dual monitoring LCD displays (video cameras + controller); • Emergency botton on remote control; • Dual table lifting system at the same level for extra precission; • Electrical cabinet complete CE with safety relay and AC Unit; • Independent cabinet for Laser source, also with AC unit; • Glass OD4+ laser protection system with fully enclosure according to CE. • Rubber protection seals around bottom side of the machine that provides better exhaustion for the smoke inside. Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.530 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max Single Lifting Platform Loading: 800 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.02 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 380V/50Hz/3Phases Protection Grade: IP54 Weight & Size Machine Size: 8.896*2.440*2.210 mm Machine Weight: 5.800 kg

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-OR-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.02 mm Maximum speed: 80 m/min Ijdpfx Adsxfrgkenja Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs

Condition: new, functionality: fully functional, laser power: 12,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 370 mm, DESCRIPTION ST4 High-powered Fiber Laser Cutting Machine The ST Series is a high-powered fiber laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thick sheet metals. Technical specifications Features • Electric Control for door and platform. Flexible and Efficient • Dual monitoring LCD displays (video cameras + controller) • Loading weight up to 2.500 kgs • Fully Enclosed Protective Cover with CE • Back panel control for pallet with emergecy button • Auto-focus laser head with automatic detection • Industial components with high durability • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm (1.7 kW motor) Y-axis Stroke: 4.050 mm (2 x 2.4 kW motors) Z-axis Stroke: 370 mm (0.75 kW motor) Max Single Lifting Platform Loading: 2.500 kg Accuracy Isdpfxexfq Sxe Adnoa X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 62.8kW/97A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 10.615*3.540*2.520 mm Machine Weight: 9.000 kg