CO2 Fiber Laser Marking Machine

PFEIFER technology skylaser MARK CO2 / Faserlaser

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 200300381, total length: 5,220 mm, workpiece weight (max.): 3,000 kg, Glass Washing Machine Bavelloni LV1604-20 Operating direction: right to left Illuminated discharge area for quality control. 3 washing zones, each with its own water tank: - First tank for brush pair No. 1 is electrically heated and filled with detergent/water mixture. - Second tank for brush pair No. 2 contains cold water for rinsing. - Third tank is for washing zone 3, equipped with spray nozzles for rinsing with pure water. A drying zone follows, utilizing air nozzles powered by a fan. The machine is designed for glass heights up to 1600mm but is open at the top, allowing the transport of taller glass panes. Glass thickness: up to max. 20mm Infeed section length: 1400mm; main machine length: 1820mm; outfeed section length: 2000mm. Automatic stop of the feed rollers when the glass reaches the end of the outfeed section. Operating manual, spare parts list, and wiring diagram are available. The machine has been regularly maintained and is operational; it will be dismantled in calendar week 31/32 of 2025. For further details and dimensions, please refer to the photos or feel free to inquire. Demonstration and inspection can be arranged by appointment. Gijdpfx Asvkxzpegbsl Dismantling, loading, and transportation should preferably be organized by the buyer, but can be handled by us upon agreement. A forklift and various assisting tools can be provided. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee is given for completeness or accuracy! Subject to prior sale. Sold without any warranty or guarantee, as viewed.

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Giedpougv R Ijfx Agbel

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request Giodpfx Aou Sm H Hjgbel

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending Gisdpfx Aouxfucjgbsl depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Centers height : 175 [mm] - Distance between centers : 1000 [mm] LINEAR AXES - Grinding length : 500 [mm] - Travels X x Z : 267 X 650 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Continuous orientation : +/-8,5 [°] - External wheel dimensions : 500 x 80 x 203 [mm] - Grinding wheel holder headstock power : 7,5 [kW] - Cutting speed : 44 [m/s] PART HOLDER HEADSTOCK - Taper type : CM5 - Axis C : +/-0.5[°] - Power : 1 [kW] - Rotation speed : 30-1000 [Rpm] TAILSTOCK - Taper type : CM3 - Quill travel : 35 [mm] - Quill diameter : 50 [mm] - Max. part weight between centers : 130 [kg] ELECTRIC SUPPLY - Supply voltage : 400V 50 Hz - Machine dimensions : 2700 x 2350 x H. 2100 [mm] - Weight : 4 000 [kg] HOURS - Working hours : 17.775 [h] EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] - Paper filtering unit - Oil mist extractor Gedpfeuhbydjx Agbeil - Wheel-holders flanges

Condition: excellent (used), Geba HS 240 'long slice' slicer with very low running hours - less than 2,500. Available immediately. Gisdpfx Ajk H H Dyogbsl

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Gisdpfx Aged Dhw Nsbsl

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Gsdpfswwundsx Agbsil Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Godpfxeu Dxb To Agbeil Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Giedpfxsgqutce Agbol Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Gas fired burner with reset facility Complete with extractor fan and ducting In excellent working condition, ready for use.