Used Laminating Press for sale (13,161)

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min Iedpfxetwv S Ne Abnetk - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Itjdpfxozvayaj Abnok Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Iedpfxezvdm Rj Abnjtk Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing Iodpfxsznwhrs Abnetk • IST Metz UV Drying System • Corona Treatment • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Iodpfozn Hl Tex Abnetk Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Iodpfx Abozca Uxjnstk

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Iedpfx Ajzuzwqobnjtk Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Fiery NX Pro Server (EX 280) Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Ijdpfx Abezb Aivsnetk Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: new, Year of construction: 2026, CORMAK VP3000 Gluing Press The CORMAK VP3000 is an industrial hydraulic gluing press designed for precise bonding of solid wood and wood-based components. Equipped with six fully adjustable hydraulic cylinders with high pressing force, the machine ensures uniform pressure distribution and repeatable gluing results across the entire working surface. Thanks to its robust construction and advanced hydraulic system, the CORMAK VP3000 is perfectly suited for both individual production and serial manufacturing. Main advantages of the machine 6 hydraulic cylinders – each with a pressing force of 2000 kg, enabling uniform bonding of large and demanding components. Full pressure adjustment – allows precise adjustment of the clamping force according to the type and thickness of the material. Hydraulic valves with locking function – maintain constant pressure throughout the entire working cycle, ensuring reliable and consistent gluing results. Pressure gauge – enables continuous monitoring and accurate setting of operating parameters. Easy adjustment of pressing units – quick positioning of the clamping elements saves time and increases work efficiency. Steel construction – provides high stability and resistance to deformation during long-term operation. Design and technology The CORMAK VP3000 press has been designed for intensive use in industrial environments. The rigid frame made of steel profiles provides a stable base for six hydraulic pressing units. Each unit can be adjusted independently and positioned according to the operator’s requirements. The minimum distance between pressing units is 240 mm, allowing work with narrow and short components. Thanks to locking valves and an integrated pressure gauge, the operator has full control over the entire gluing process, including pressing force and pressure distribution. This solution is particularly important in factories producing glued panels, countertops, and furniture components, where connection quality and stability are essential. Precision and working efficiency One of the key advantages of the VP3000 model is its excellent repeatability – both in terms of pressing force and the accuracy of glued joints. The gluing press provides even pressure distribution over the entire working area, eliminating the risk of gaps, voids, or improperly bonded sections. The machine is simple and quick to operate and does not require extensive operator training. This allows faster implementation into production environments and improves overall manufacturing efficiency. Applications The hydraulic CORMAK VP3000 press is ideal for: gluing solid wood and laminated panels, Iedpfowcy U Tsx Abnjtk production of furniture and structural glued panels, manufacturing worktops and cabinet fronts, bonding frame and staircase components, professional woodworking workshops and serial production facilities. Standard equipment 6 hydraulic cylinders with a pressing force of 2000 kg each, hydraulic pressure gauge, working pressure locking system, adjustable pressing units, robust steel construction. Technical specifications Parameter Specification Total height 2040 mm Total width 3000 mm Maximum clamping height 1550 mm Minimum distance between pressing units 240 mm Hole distance from pressing unit 50 mm Working pressure 6 × 2000 kg External dimensions 3030 × 450 × 660 mm Total weight 260 kg

Condition: ready for operation (used), Year of construction: 1984, Machine Identity & Compliance Manufacturer: Schmid (Feintool Schmid) Model / Type: T6-200 2 Year of Manufacture: 1984 Machine Serial Number: 20-1200 Internal Plant Asset ID: MK18166 / DB04134 Safety Certifications: CE Compliant Inspection Authority: TÜV Rheinland Operational Metrics & Current Counters Total Operating Hours: 110,777.4 Hours Total Stroke Count: 19,333,830 Total Strokes (Totalhübe) Mechanical & Force Profile Total Nominal Press Force: 2,000 kN (Approx. 204 Metric Tons) Downward Ejection Force: 400 kN Lower Ejector Stroke: 60 mm Maximum Slide Stroke: 200 mm Slide Range (Max Forming): 195 mm Slide Stop Adjustment Range: 75 mm Velocity & Frequency Ratings Rapid Approach Speed: 240 mm/s Return Stroke Speed: 240 mm/s Maximum Forming Speed: Approx. 26 mm/s Max Wobble Frequency: 340 cycles per minute (1/min) Fluid, Pressure & Lubrication Specifications Hydraulic Oil Capacity: 950 Liters Maximum Hydraulic Pressure: 320 bar Lubricating Oil Capacity: 100 Liters Maximum Lubrication Pressure: 550 bar Tooling Area & Configuration Setup Kinematic Type: Orbital / Wobble cold compression forming mechanism (Taumelantrieb) featuring a central heavy-duty guide pin. Die Space Requirements: Stamped for lower die installations using new mounting hardware (Einbau Untergesenk - Bitte mit neuen Schrauben). Integrated Safety Features: Electronic die protection circuitry (Gesenkschutz). Itodpfjzvnicjx Abnjk Ejection Control: Upper and lower programmable ejection logic (Ausstossen). Air Cleanout Circuit: Pneumatic parts/debris blowout valve (Blasen). Logistics, Power & Automation Infrastructure Electrical Supply: 3-Phase / 400 V / 50 Hz Net Machine Weight: Approx. 10,200 kg (10.2 Metric Tons)

Condition: used, Year of construction: 1986, Equipment: hot water, THROUGH FEED VENEER PRESS LINE, FOR DOOR PRODUCTION Maximum press measures : L 4200 x 1400 mm Heating : Hot water Maximum pressure : 200 ton Glue station : MECMAN 800, spray glue, 8 pc. of spray guns, pump. Has been used for waterproof door production, polysteren on laminate/composite. Total length : Infeed rolls + press + outfeed rolls : 11000 + 5500 + 5000 = 21500 cm Ijdpjw Ulv Ejfx Abnjtk Can be examined in working condition

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX Colour Press C550 with CREO CX560 Print Server (Activation dongle for monitor, keyboard and mouse is included, the accessories themselves are not included!), i1 Spectrophotometer, A3+/SRA3 High Capacity Feeder with 1 Tray & Professional Booklet Maker Finisher for sale. OPTIONAL: As an alternative to the CREO Print Server we can also attach an integrated FIERY EX-i 560 controller to this machine at the same price. Please ask for the FIERY in this case. The machine will be delivered with either CREO Print Server or FIery Controller. Itedpfxszrulpj Abnek Counter: ONLY 1.730.992 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Please contact us with questions! We will be happy to help you!

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Itodpfxozvfp He Abnsk Motor power: 3 kW

Year of construction: 2025, condition: new, functionality: fully functional, "Columbus Vacuflex" Vacuum Bag – Available Immediately! (Professional vacuum bag for a wide range of vacuum technology applications) The COLUMBUS Vacuflex is a robust and versatile vacuum bag designed for applications such as vacuum form bonding, veneering, coating, and laminating workpieces made of wood and wood-based materials. Thanks to its flexible construction, the vacuum bag is particularly suitable for workpieces that, due to their size or geometry, cannot be processed, or can only be processed to a limited extent, in conventional vacuum presses. Isdjzqtnmepfx Abnetk The fabric-reinforced and durable material ensures a long service life, even under demanding professional use. At the same time, the vacuum bag allows for easy handling and can flexibly adapt to various workpiece shapes. With the COLUMBUS Vacuflex, even very large or complex workpieces can be efficiently produced. This makes the vacuum bag ideal as a standalone tool for smaller production environments as well as a valuable addition to existing vacuum presses, significantly broadening the scope of applications. Technical Specifications • Robust, fabric-reinforced vacuum bag • High flexibility for a wide variety of workpiece shapes • Suitable for form bonding, veneering, and laminating • Ideal for large or complex workpieces • Simple integration into existing production processes • Perfect as an accessory for vacuum presses The COLUMBUS Vacuflex is developed and manufactured directly by the OEM and is designed for long-term use. High-quality materials and meticulous workmanship ensure exceptional reliability and long service life.

Condition: new, Year of construction: 2026, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Iedpfxsyr R Hws Abnjtk Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “Minolta bizhub PRESS 2250P.” Ijdpfozl S Tqjx Abnjtk Items for sale: 1 x Minolta bizhub PRESS 2250P with the following features: Includes internal controller Includes LS-506/RU-510/PI-PFU finisher Includes paper deck Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 7,836,379 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Ijdpfx Aewi T Tvobnstk Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Itjdpfx Abszvliyenek Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: used, Year of construction: 1987, machine/vehicle number: 17080987, input voltage: 380 V, table length: 2,500 mm, total width: 1,300 mm, year of last overhaul: 2024, Equipment: documentation/manual, We are offering this used Italpresse BN-25-F veneer press, manufactured in 1987. It has been inspected and overhauled in 2024 and is SKH certified. It features two-hand operation and an emergency stop. If you have any questions or would like more information, please feel free to send us a message or call us. Iedpfx Aozu A Azjbnotk

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Isdpfev Sthgsx Abnotk Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1969, colour units 1 max. printing speed sheets 4000 /h max. paper size 64 x 90 cm Itsdpfx Aezvhicsbnok total weight with 2 piles 6000 kg

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Platen height from floor: 800 mm Platen closing time: 1–2 seconds Isdpswiw Uqofx Abnstk Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Automatic loading conveyor Unloading roller conveyors Robust frame made of seamless steel sheets Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Iedpecmat Ujfx Abnetk Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg - free loading - Isdedvltyepfx Abnotk

Condition: used, Year of construction: 2010, machine/vehicle number: Howard 1900 PLE, functionality: fully functional, operating hours: 40 h, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, total length: 5,000 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 960 kg, Equipment: CE marking, Used hose press from production conversion. The system was used for pressing or dewatering plant-based materials. On-site inspection and functional video are available upon request. • Suitable for dealers and processors in the fruit, juice, cider, or plant processing sector. • Stainless steel trays are included in the scope of delivery. • Sale due to system or process change. Isdpfx Abjzuzfnjnstk