Used Kunzmann Ba 600 for sale (70)

Condition: used, Year of construction: 2000, Kunzmann machining center BA 600 complete with Heidenhain control. Very good condition, however, there are occasional control issues. Redpfx Agsxn Av Us Ajch

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 600 015, table mounting size: 750 x 450 mm movements x/y/z: 600/400/600 mm spindle taper: SK 40 ISA Rcsdpfetuktzex Ag Ash min./max. distance table/spindle: 90/690 mm spindle turning speed range: 50 - 8000 rpm number of tool positions: 24 pieces carriages: 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2500 x 2500 x 2800 mm weight: 3200 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,238 h, functionality: fully functional, machine/vehicle number: 120007, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X: 1,200 mm Travel Y: 700 mm Travel Z: 750 mm Maximum spindle speed: 8,000 rpm Rcedsxnwxqepfx Ag Aoh MACHINE DETAILS Control: Heidenhain TNC530 Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 6.3 A Operating hours Spindle hours: 5,238 h Control on-time: 17,705 h

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, Equipment: chip conveyor, rotational speed infinitely variable, Kunzmann BA 1000 Year of manufacture: 2015 Control: Heidenhain iTNC 530 32-position tool changer, SK40 Heidenhain table probe Prepared for 3D infrared probe Heidenhain handwheel HR410 Linear scales on all axes Hinged belt chip conveyor Internal coolant supply, 20 bar Oil mist extractor Operating hours approx. 17,800 Spindle hours approx. 6,200 Rcjdpfx Agowlg Tbs Ajh The machine can be inspected at our facility.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Rodpfxewp Hv Re Ag Asch Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: used, Cross support, cross support, cross table, cross slide table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420 / H730 mm Rcodpfxsg Dg Rpj Ag Aoh -Weight: 80 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 9,025 h, functionality: fully functional, Kunzmann BA 1000 machining center (2016) Manufacturer: Kunzmann Type: BA 1000 Year of manufacture: 2016 Control: Heidenhain iTNC 530 HSCI Condition: used, good, in production X-travel 1020mm Y-travel 620mm Z-travel 610mm Feed 15m/min Rapid traverse 30/30/24 m/min InLine milling spindle 1-12000rpm Tool holder ISO 40 DIN 69871 Tool magazine 32 slots Clamping table 1200×610 mm 6 T-slots 18 H 8 Table load 850kg Automatic central lubrication Spindle oil cooler Chip flushing hose Spindle blow-out system Coolant device Hinged conveyor belt (right or Left) IKZ 25 bar Internal cooling by air Handwheel HR410 Infrared button TS632 Rcodpfjwp Hu Tox Ag Aeh Power consumption 35kVA Length 450cm Width 230cm Height 260cm Weight 7800kg Without clamping device

Condition: used, Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg Rsdog Dg R Nopfx Ag Ajch

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control System | Excellent Condition | CE-Compliant! Technical Data: - Year of manufacture: 2015 | Machine No. 610398 - Milling table clamping surface: 800 x 425 mm - Clamping slots: 6 - Slot width: 14 H7 - Slot spacing: 63 mm - Maximum load: 300 kg - Spindle speed range: 1 – 4500 rpm - Infinitely variable feed: 0–2000 mm/min - Rapid traverse (X and Y axis): 5000 mm/min - Z axis: 4000 mm/min Rodpewz Eu Nsfx Ag Aech - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill: SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Power rating at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control system - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: Offered here is a tool milling machine Kunzmann WF 600M equipped with a Heidenhain TNC 128 control system. The TNC 128 provides numerous dialog-guided cycles with graphical simulation for quick and easy data entry, such as various drilling cycles, tapping, bolt circles, linear hole patterns, rectangular pockets, rectangular tenons, and surface facing. This universal milling machine is in like-new condition. The control system is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operation. Switching from vertical to horizontal is very simple by swiveling the vertical head to the side. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested at our facility. You are welcome to view and test the Kunzmann under power on-site.

Condition: used, Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm Rcjded Tx E Njpfx Ag Aoh -Weight: 28 kg

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 Redpfx Ash Hrvfeg Aech tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Rcjdpfx Agolvyrbs Ash Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device Rcjdpfxovc Awfs Ag Aeh 3-way DRO Heidenhain control panel Accessories see photo *

Condition: like new (used), Machine like new from laboratory x-path 400 mm y-path 320 mm Rcodpfx Agsu Nnaio Ash z-path 400 mm Control Heidenhain TNC124 table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivels 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirement approx. 2.00 x 2.00 x 2.00 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, Availability – immediate Good technical condition Location – Warsaw. Configuration: - High-pile feeder, - Soundproof covers, - Controller with counter and batch marking, - 6 folding pockets, - 2 folding knives, - Mobile stream delivery. TECHNICAL SPECIFICATIONS Max. input format: 52 x 80 cm (parallel fold); Min. input format: 15 x 19 cm (parallel fold); 15 x 19 cm (cross fold) Paper weight range: min. 40 g/m², max. 300 g/m² Rcedpfexn Sy Nox Ag Ash Minimum fold length: 45 mm

Condition: good (used), Year of construction: 2014, operating hours: 7,633 h, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table load: 500 kg, The machine is currently no longer in use. The machine can be inspected at any time. Control: Heidenhain I TNC 530 SK40 60-position magazine. Rjdpsxl T Naofx Ag Ajch

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Redpfx Ajit Tr Tsg Aoch Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Rcsdowb Erzepfx Ag Aoh

Condition: excellent (used), Year of construction: 1983, x-travel 450 mm Rodpfxjxdnple Ag Aoch y-travel 200 mm z-travel 465 mm total power requirement 2,6 kW weight of the machine ca. 1.2 t

Condition: excellent (used), Year of construction: 2002, Kunzmann WF4/3 Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 124 Control, Year of Manufacture 2002 – Excellent CONDITION CE-compliant!! Technical Data: • Year of manufacture: 2002 • Fixed angle table • Spindle speed: infinitely variable up to 4000 rpm • Feed rates, infinitely variable in 3 axes: 0 to 2000 mm/min • Travel X/Y/Z: 400/350/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic clamping system • Approx. weight: 1700 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 12 KVA Rjdpew U Exyefx Ag Aoch Accessories & Equipment: • Heidenhain TNC 124 Control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control unit. This universal milling machine is in excellent original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. Take the opportunity to view and test the Kunzmann under power at our location. You can find more milling machines from renowned manufacturers on our website.

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Rcsdount Ihepfx Ag Aeh Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Rsdpfx Aowhm S Neg Asch Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm Rcedpfx Agjwglapj Ajh - 20-Station Tool Changer - Heidenhain Tool Probe - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Rcodpfetdfbmex Ag Ash Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Rcedowhm Sispfx Ag Ajh Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.