Used Kunzmann Ba 600 for sale (62)

Condition: excellent (used), Year of construction: 1990, Make: Kunzmann Type: WF5/3 Year of construction: 1990 X - axis: 500 mm Y - axis: 360 mm Z - axis: 420 mm Clamping surface: 700 x 350 mm tool holder: SK40 Ncsdpfx Ajffyfrehvop spindle bore: 22 mm quill stroke: 60 mm Dimensions: approx. W 1.50 x D 2.40 x H 1.90 m Weight: approx. 1.6 t All information without guarantee. The machine is in a very good condition. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1986, Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y Nsdpfx Ahsich Dvsvecp and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Nedpsvhfqrsfx Ahvscp Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Technical data: Table longitudinal travel automatic: 440 mm Ncodpfxsudb N Dj Ahvsp Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t Njdpeunt Ihsfx Ahvecp dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: good (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 1 rpm, spindle mount: MK 4, table length: 700 mm, table width: 425 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 700 x 425 mm Spindle nose: SK 40 Spindle speeds: 1 - 4000 rpm Ncedpoyac Hlsfx Ahvep Spindle stroke: 60 mm Featured with: - ISO toolholders - Cooling unit - User Manuals Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nodpfjh Hrvfex Ahvecp +++++

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, Ncedpfx Ahjhikrrjvep RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Controlled axes: 3 Technical Data: Ncedpfx Aowglapshvop Travel X/Y/Z: 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 12,000 rpm Max. table load: 400 kg Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Heidenhain iTNC 530 CNC control - 20-position automatic tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication - approx. 25 tool holders

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck Ncedjv Rppkjpfx Ahvjp >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 Ncedpfxswrhxfj Ahvop About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 310 path control Very good CONDITION CE-compliant!! Technical data: >> Year of manufacture 2004 Machine No. 370506 >> Milling table clamping surface 800 x 425 mm Clamping slots 6 Slot width 14 H 7 Slot distance 63 mm Maximum load 300 kg >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 2000 Kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 KW Accessories and equipment: >> Heidenhain TNC 310 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Electronic handwheel >> Heidenhain probe >> Technical documentation, spare part diagrams, operating manual Nedpfx Ahowpkchovecp >> Full protection cabin >> Coolant system About the machine: A Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 path control is being offered. This universal milling machine is in very good condition. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on site under power.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 contouring control, very good CONDITION, CE compliant!! Technical data: >> Year of manufacture 2008 Machine no. 348084 >> Rigid angle table >> Speed: infinitely variable up to 4500 rpm >> Feed infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contouring control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: Njdpfx Ahev Dut Ievscp A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 contouring control is offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. The machine also has hydraulic tension vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site under power.

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Ncedpfx Aeuf Sv Djhvsp The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank Njdpfx Aeiqkc Iohvjcp

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine Ncjdpfxsw U U Sie Ahvep - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. Nodpfx Asvr Stujhvjcp With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: Ncsdpfx Asx Elxpshvjp >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) Ncodpom Nbwtofx Ahvep can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Kunzmann WF 7 CNC milling machine TNC 410 control Manufacturer: Kunzmann Type: WF 7 Year of manufacture: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-path 610 Y-path 400 Z-path 400 SK 40 housing Speed 1-5000rpm Tilt/swivel table Scope of delivery: - Underlays - Various tool holders Ncedpfexwl Ufjx Ahvop

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Ncedpfx Ahexwl T Ujvop Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes Ncsdpovyr R Nefx Ahvep >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples Nedpfxexuppuj Ahvocp • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Data: - Year of manufacture: 2010 Machine No. 347284 - Fixed angular table - Spindle speed: Infinitely variable up to 4500 rpm - Feed rate: Infinitely variable in 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min - Rapid traverse Z axis: 4000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Overall dimensions approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Ncjdpfx Aoxupdlshvsp Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power on site. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines are available. The machines are ready for immediate delivery.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic tool clamping system >> Weight: approx. 1,800 kg >> Space requirement: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Ncsdpfx Asxupc Ushvep Accessories and Features: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping for vertical and horizontal axes >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with very few operating hours. Previously used exclusively for training purposes, it features a highly user-friendly control system. The machine offers hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is extremely easy via the tilting vertical head. Guideways are continuously lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann machine under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls are available. The machines are immediately available.