Used Jpt 310 for sale (2,233)

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Iajdpfx Ahotwy Iuevjp Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, machine/vehicle number: 006432, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Ijdst Hmq Hjpfx Ahvoap Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Iaedpfxjyg Eu Sj Ahvop Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Iajdjwcmxlepfx Ahvjp Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: new, Year of construction: 2026, Functions: 1. Direction of rotation switch: This switch allows the operator to control the direction of rotation of the rotator disc, which is important during precision welding work. 2. Direction of rotation switch: Thanks to this tool, the operator can easily change the direction of rotation of the disc, which allows the device to be flexibly adapted to various tasks. 3. Smooth regulation of the disc rotation speed: Adjusting the disc rotation speed allows you to adapt the device to various materials and welding processes, which increases the precision and quality of work. 4. Compact, compact design: The compact design of the device saves space in the workshop and makes it easy to move the device to different work stations. 5. Control pedal: The control pedal allows the operator to precisely control the operation of the rotator, which is important when welding and assembling elements. 6. Thermal fuse: The presence of a thermal fuse protects the device from overheating, which increases operational safety and durability of the machine. 7. Brush motor: The brush motor ensures stable and effective operation of the device, which is important in welding applications. 8. Disc inclination range 0 - 90°: The ability to tilt the disc in the range from 0 to 90 degrees allows you to work in the optimal position, which translates into the quality of welds and the operator's comfort. 9. Possibility of installing a centering holder: This enables accurate and stable mounting of elements, which is important for precise assembly and welding work. Advantages: 1. Higher work efficiency: Thanks to the ability to rotate cylindrical elements, assembly and welding work becomes more effective. 2. Reducing production costs: Increasing the precision and quality of work can help reduce reject costs and improve production efficiency. 3. Repeatability of the joints made: The device ensures constant quality of welds and joints, which is important in industries that require repeatability. 4. Flexibility in use: The ability to adjust the speed, direction of rotation and inclination of the disc makes the tool flexible and adaptable to various tasks. 5. Improves the welder's working conditions: It facilitates the welder's work, enabling welding in the optimal position, which affects the comfort and safety of work. Set contains: Iasdpfx Ahjrigk Nsvop 1. PS-310 positioner device. 2. Control pedal. 3. Power cable. 4. User manual. 5. Mast with welding fixture. This kit contains the necessary elements to start working with the device and allows you to use its full capabilities in terms of assembly and welding. Technical parameters: Maximum load 30kg Worktable size φ310mm Tilt angle 0° ~ + 90° Rotation speed 1-15 rpm Rotational power 120W Manual tilt speed Voltage 220V-1PH-50HZ Weapon support Dimensions 500x500x440 mm Weight 34 kg *three-jaw chuck is not included in the set

Condition: good (used), Robland planer thicknesser 3 Tersa knives Iasdpfx Ajvyhmgohvsp 1 thicknesser feed speed thicknesser processing height 230mm soundproofing combs in the table table length 140cm the machine is efficient and ready to work

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Isdelbimaspfx Ahvoap Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine Iedpfxjlbilvj Ahveap • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls Iedpfx Aerhig Ejhvjap - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: Iaedpfx Ajir Eubshvop - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Iasdpfx Ahsx A Hi Isvsp Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8 Iedpfxjygtcqs Ahvoap

Condition: used, machine/vehicle number: 008107, undefinedPosition 2: Panel Return Systems HOMAG + LIGMATECH-KAR 310/9/A20/S2 Ijdpfxow U Rqze Ahvjap

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Iedswuuc Aopfx Ahvjap

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Type HT 310-6 TS Iedpfx Ajyglr Rohvoap Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Equipped with pneumatic rear support table

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Iaedpfjygiafjx Ahvjp Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: used, machine/vehicle number: 19138, Zusammentragmaschine / Collating Machine PLOCKMATIC 310Baujahr / Year 1998 - Serial-No. 310034919 10 Staionen Zusammentragmaschine / 10 Stations Collating Machine Isdpfx Aoh Axwzjhvjap Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handnbücher / ManualsElektrischer Anschlusswert / Electrics 230 V - 2 ph Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, mileage: 40,500 km, power: 96 kW (130.52 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Increase of the towing capacity to 3,140 kg possible. Special equipment: - Passenger side airbag - Exterior mirrors with extended mounting arms - Tire repair kit - Side airbags - Seat package 29: Driver's seat (4-way adjustable, electric) - Double passenger seat including side airbag and seat heating - Second folding remote key - Heated seats for driver and passenger Additional features: - Overhead storage compartment in cab - Driver's airbag - Steering wheel audio/radio remote controls - Audio system: Radio with USB and Bluetooth hands-free function - Electrically adjustable and heated exterior mirrors, extended mounting arms - On-board computer - Docking station (MyFord Dock) - Electronic brake-force distribution (EBD) - Electronic traction control - Driver assistance systems: Hill start assist, Side wind assist - Fixed windows in load/passenger area: 2nd row left & right - FordPass Connect including eCall - Vehicle without anti-lock braking system (ABS) - Reinforced alternator - Lockable glove compartment - Heater with recirculation mode - Cabin interior lights: Front reading light - Body/chassis: Standard double cab flatbed - Radiator grille with chrome trim - Radiator grille black/grey - Steering column (steering wheel) height and length adjustable - Engine 2.0 L – 96 kW TDCi CAT - My Key (2nd programmable vehicle key) - Digital radio reception (DAB+) - Wheelbase: 3,504 mm - Rear seat package 1 (2 double seats, 2nd row, removable) Isdpfx Ahsyi N I Ueveap - Low-emission according to Euro 6d-TEMP emission standard - Steel wheels 6.5x16 - Start/Stop system - Trend - Slightly tinted thermal insulation glass

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Iodpfx Ahoyf Hpzevjap

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1100 - Sheet support system: None - Finger guard: Fixed Iodpfeyf Hhwex Ahvjap - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, mileage: 700 km, power: 228 kW (309.99 HP), first registration: 12/2025, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, loading space length: 7,800 mm, loading space width: 2,600 mm, loading space height: 2,600 mm, Year of construction: 2025, Equipment: tail-lift, Technical Information Number of cylinders: 6 Engine displacement: 6,700 cc Gross vehicle weight (GVW): 19,000 kg Transmission Transmission: ZF Powerline, 8-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Iaodpev Tlmwefx Ahvop Front axle: Max. axle load: 8,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: parabolic springs Rear axle: Max. axle load: 13,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: air suspension Functional Tail lift: Dhollandia DH/LM, tailgate, 2,000 kg Superstructure brand: Carr De Bruecker Plywood Condition Overall condition: very good Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: None

Condition: new, Year of construction: 2026, functionality: fully functional, Data Iajdpfxocgkurj Ahvep Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Year of construction: 2009, condition: ready for operation (used), Turning diameter: 200mm, passage diameter: 330mm, passage diameter over cross slide: 260mm, travel X/Z: 160mm/460mm, feed X/Z: 24m/min, speed: 5000rpm, spindle clearance: 51mm, spindle power: 16.5kW/11kW, torque: 1665.5Nm/112Nm, tailstock: 400mm, tool positions: 12. Machine dimensions X/Y/Z: approx. 4200mm/1700mm/2300mm, weight: approx. 3500kg, control: Siemens Sinumerik 810D. Including chip conveyor. Documentation available. On-site inspection is possible. Iaedpev Dkb Ijfx Ahvop

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Iasdpfx Aeuqackshvep

Year of construction: 2009, condition: ready for operation (used), A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible. Iaedoygmcqopfx Ahvep