Used Jones Shipman 1400 for sale (2,095)

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Cpodpfoyh Nvgjx Aa Eow

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Cpsdpfx Aasuiykdo Eow

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Cedpsxn Aagsfx Aa Espw

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Cpjdpfxexgudbs Aa Eew

Year of construction: 1961, condition: ready for operation (used), Cutting width: 1100mm, number of cutting blades: 11, material thickness: 0.1mm-1mm, max. winding diameter: 450mm, machine dimensions X/Y/Z: approx. 6000mm/4000mm/1900mm, weight: approx. 5000kg. On-site inspection is possible. Csdpfxjt Siaus Aa Ejpw

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Cpsdpfxjwa A Tto Aa Ejw

Year of construction: 2005, condition: ready for operation (used), Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible. Cpjdpev Ip Rvofx Aa Eow

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Cpjdpfx Ajtphubja Eew

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE Csdpfx Aaoyft Nno Espw

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. Codpfx Asyft Ahea Eopw - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Inspection is possible at any time by appointment.

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Cpjdsu N Ndvjpfx Aa Eow Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Optional service aisles Rollers Motor

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Cjdpfx Aasyfgx No Ejpw Parts shown by hand not come. Technical details are shown on pictures.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C Cpodpfxskn Rz Hj Aa Eow endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition . Cpedpfx Ajvi Hryoa Eow

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Cpsdpfot Rbznox Aa Eow

Year of construction: 2003, condition: excellent (used), functionality: fully functional, vertical glass sandblasting machine Cpsdpfx Asyhcnrsa Eew working height : 1400 mm open top number of guns : 5

Condition: excellent (used), Maximum reach: 1374 mm Control: Panasonic WG-E1400 Source: Panasonic YD-500AF2 Two rotary positioners Cpjdexnmqcspfx Aa Ejw

Condition: excellent (used), Year of manufacture: 2005 Maximum reach: 1374 mm Maximum payload: 6 kg Number of axes: 6 Axis ranges: J1 +170° – 170° J2 +155° – 90° J3 +90° – 80° J4 +270° – 270° J5 +90° – 150° J6 +400° – 400° Control unit: Panasonic WG-E1400 Codpfx Aoxnml Tja Ejpw Power source: Panasonic YD-500AF2 Two Panasonic YA-1GJB11 positioners Max. positioner load capacity: 200 kg

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Cpodpfjq N Ay Aox Aa Eew Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: used, Semi-automatic PET bottle blow molding machine Codpfeugu E Rox Aa Eopw Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Condition: used, Year of construction: 2001, functionality: fully functional, MARK: BARBERAN, S.A. TYPE: ROLLER COATER MODEL: BRB2-1400-RR CONSTRUCTION YEAR: 2001 Technical characteristics Working width 1400 mm Control side left Max application width 1330 mm Min application thickness 5 mm Max application thickness 80 mm Min piece length 100 mm Working height 900 mm Dosing roller Ø 174 x 1415 mm Cpjdord U Rnjpfx Aa Ejw Applicator roller Ø 245 x 1415 mm Rubber quality grey butyl, 40Sh Belt sizes 4.060 x 1330 mm Conveyor speed 4-24 m/min Applicator speed 4-24 m/min Dosing roller speed 1-6 m/min Power of conveyor motor 0,75 kW Power of applicator motor 2 x0,75 kW=1.5 kW Power of dosing roller 2 x0,37 kW=0,75 kW Power of oscillation blade 2 x0,18 kW=0,36 kW Resistance tank 1,5 kW Installed power 5 kW Compressed air pressure 6 bars L 2700 x W 2000 x H 1500 Weight 1950 kg

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! also available as Craneset Codpfx Aasq R N Tqs Ejpw

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T Cpodpfxovxa Tpo Aa Esw work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: used, functionality: fully functional, Year of construction: 1986, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: CT12, bending force (max.): 225 t, working width: 1,400 mm, stroke length: 212 mm, number of axes: 3, table height: 800 mm, travel distance X-axis: 800 mm, overall weight: 22,000 kg, total length: 2,670 mm, total width: 1,690 mm, total height: 4,480 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: documentation/manual, Used Press Brake WITHOUT numerical control Oil cooling unit included, delivered with the machine Hydraulic punch clamping Rear stop X and R Immediately available WITHOUT numerical control To be collected on site without crane or loading (net price to be paid on site: €500) Cpodpfxswx Rl Uj Aa Esw

Condition: good (used), Year of construction: 2017, Kunzmann BA1400 Year of manufacture: 2017 Power: 28 kW Csdpfx Aaeydxk Io Espw Control system: Heidenhain TNC 640 Table dimensions: 1400 x 710 mm Max. workpiece weight: 1500 kg Spindle taper: SK40 Max. tool weight: 160 kg Tool change time: 3 sec Chip-to-chip time: 8 sec X-axis: 1400 mm Y-axis: 700 mm Z-axis: 760 mm 3D touch probe High-pressure coolant through spindle (IKZ) Internal chip auger Machine from single-shift operation