Used Injection Molding Machine Vertical for sale (92,603)

Condition: excellent (used), Year of construction: 2009, operating hours: 25,500 h, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580 mm, displacement volume: 442 cm³, injection pressure: 2,100 bar, injection weight: 393 g, overall weight: 11,000 kg, General Data Year of manufacture: 2009 Weight: 11,000 kg Dimensions (L × W × H): 6.7 × 1.7 × 2.2 m Control system: NC5 Operating hours: 25,500 h Clamping Unit Clamping system: 210/... Clamping force: 210 t Platen dimensions (H × V): 855 × 860 mm Tie bar spacing (H × V): 580 × 580 mm Mold height (min.–max.): 340 – 690 mm (max. increased) Opening stroke: 575 mm Maximum daylight: 1265 mm Ejector stroke: 165 mm Ejector force: 60 kN Dkodpfoxc Ifwex Afzsu Ejector coupling: mechanical (automatic engagement, manual disengagement) Injection Unit Injection unit type: …/1000 Screw diameter: 50 mm Screw L/D ratio: 20 Injection volume: 442 cm³ Shot weight: 393 g Specific injection pressure: 2,100 bar Wear-resistant screw; bimetallic cylinder; standard L:D Check valve (RSP), 3-piece, ring type Additional Equipment Extended maximum mold height (min. unchanged, max. increased) Mold opening and ejector function only with safety guard closed Programmable injection pressure before screw (multi-point curve – 6 support points) Injection, hold pressure, pre-injection pressure, dosing – adjustable Manual pressure relief for 2 hydraulic core circuits on the moving platen (shared valve)

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Dkodpfx Asxc Ernjfzsu

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) Dodjxcw T Rspfx Afzsku - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: excellent (used), Year of construction: 2010, operating hours: 45,221 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, injection weight: 77 g, Arburg Allrounder 470H incl. removal device and safety enclosure 2x conveyor belt 1x automatic box changer Operating hours pump: 45,221 h Operating hours automation: 41,601 h Operating hours robot system: 12,276 h Djdpfxswu H U Re Afzoku

Condition: excellent (used), Year of construction: 2011, operating hours: 61,134 h, functionality: fully functional, screw diameter: 18 mm, clearance between the columns: 270 mm, displacement volume: 23 cm³, injection pressure: 2,500 bar, injection weight: 21 g, Equipment: documentation/manual, Here, as a specialist dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control Unit: Selogica Year of Manufacture: 2011 Operating Hours: 61,134 h Machine Number: 215701 Extras: - Robot interface - High-wear resistant screw - CF drive - Complete documentation and software (on CF card) - Parts separator - German language interface - Single previous owner – country of origin: Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen size: 446 x 446 mm Max. opening stroke: 350 mm Min. mould height: 200 mm Max. daylight between plates: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection Unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump motor: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Dodpfx Aew Apl Ujfzeku Warranty Warranty up to initial commissioning. Loading/Shipping Free loading onto buyer's truck, or free delivery within Germany (shipping costs apply), ex stock Hanover, Germany. Available immediately. Company and machine information: - We only sell machines purchased from ongoing production out of our own inventory in Hanover. - All machines offered are inspected and tested prior to removal. - We do NOT deal in insolvency assets – we are NOT intermediaries dealing with third-party property. - All machines offered come from successful companies where maintenance and care are standard practice. - All machines offered are available for inspection at our warehouse.

Condition: good (used), Year of construction: 1999, Krauss Maffei KM 1000-14700 CM Injection Moulding Machine Year of manufacture - 1999 Control system - MC3F TECHNICAL DATA Clamping unit: - Clamping force: kN 10,000 - Dimensions of mounting plates: mm 2000 x 1700 - Distance between columns (h x v): mm 1400 x 1120 - Maximum mould opening distance: mm 1700 - Min/max mould installation height: mm 700/1200 - Movable platen opening stroke: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 (reverse: kN 59) - Centring ring: 250mm - Nozzle radius: 38R Dkedpfx Ajxcpvksfzsu Injection unit: - Screw diameter: mm 145 - Shot weight: g 8640 - Injection volume: ccm 9495 - Specific injection pressure: bar 1552 Cores fixed platen: 2 hydraulic and 1 pneumatic Cores moving platen: 2 hydraulic Hot runner zones: 12 Electrical parameters - Connected pump load: kW 90 - Heating capacity: kW 61 Weight and dimensions - Net weight: t 65 - Machine dimensions (L x W x H): m 10.98 x 3.29 x 2.49

Condition: excellent (used), Year of construction: 2017, operating hours: 10,800 h, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,103 g, mold height (min.): 380 mm, overall weight: 21,000 kg, Demag Systec 420/820-2300 (Servo) General Information Year of manufacture: 2017 Weight: 21,000 kg Dimensions (L × W × H): 8.0 × 2.3 × 2.6 m Control: NC5 Djdpoxc Idtofx Afzoku Operating hours: 10,800 RbH Clamping Unit Clamping system: 420/... Clamping force: 420 t Platen dimensions (H × V): 1200 × 1200 mm Tie bar spacing (H × V): 820 × 820 mm Mould height (min.–max.): 380 – 1050 mm (extended by 225 mm) Maximum daylight between platens: 1050 mm Mould opening stroke: – Ejector stroke: 230 mm Ejector force: 96 kN Knee lever design with central oil lubrication Injection Unit Injection unit type: …/2300 Screw diameter: 70 mm Screw L/D ratio: 20 Injection volume: 1212 cm³ Shot weight: 1103 g Specific injection pressure: 1877 bar Hydraulic screw drive, motor I (high speed) Screw with wear protection (double bimetal, standard L:D) Additional Equipment Servo rotary adjustable pump Technology (activeDrive) Pneumatic valve 5/2 No. 1 for movable mould parts (programmable, central compressed air connection, pipe installation) Freely programmable inputs/outputs (3 inputs, 3 outputs) Interface for additional nozzle heating band (socket) 2 core pull circuits controlled by proportional valves, independent of pressure (programmable, equipped with unlockable check valves to prevent core drift) Interface for handling devices according to EUROMAP 67 (50-pin) Interface for dosing devices ("Dosing" signal) Ejector with position adjustment, freely programmable independent of P/F+v, parallel to mould movement Ejector motion controlled by proportional valve, infinitely adjustable Reinforced oil cooler (cooling water inlet up to 35°C)

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Hot runner: 6x Dsdpexc Eqqefx Afzeku incl. conveyor belt

Condition: like new (used), Year of construction: 2012, operating hours: 40,600 h, 1,0 St. gebr. Spritzgießmaschine mit Palettenwechseler Djdexac Ibjpfx Afzsku Hersteller: KRAUSS MAFFEI Typ: KM80-380 AX Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand 480 x 410 mm Einbauhöhe min.: 180 mm Öffnungsweg: 550 mm Schnecken DN: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 140 g/PS Steuerung: MC5 Ausstattung: Palettenwechseler Schnittstelle Temperiergerät Verschleißarme Plastifizierung Ca. 40.600 Betriebsstunden

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Dsdpfx Aew T S T Usfzsku Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Dkjdpfxew Tt R Ij Afzsu Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Wittmann robot General description: The machine is equipped with a fully hydraulic clamping system. Control: MC5 with color monitor, integrated operator panel, and three built-in USB ports. Plasticising unit: Complete unit for thermoplastics in a wear-resistant version, screw diameter 120 mm, non-return valve, open nozzle. Technical data Clamping unit Mould clamping force: 11,000 kN Mould opening force: 770 kN Dimensions of clamping plates (h × v): 2210 × 1910 mm Tie bar clearance (h × v): 1550 × 1250 mm Mould opening stroke: 2000 mm Mould height (min–max): 600 – 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Max. shot weight (PS): 6175 g Dksdpoxcputefx Afzju Screw speed (standard/option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 82 kW Number of heating zones (barrel): 7 Number of dry cycles according to Euromap: 802 / h Oil tank capacity: 2440 l Dimensions and weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Dksdpfx Afst Dxqtjzju Incl. robot (ASS) Production in clean room.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Dedpow Avafjfx Afzjku Opening stroke: 1600mm Tie bar distance: 1120x1000mm Platen dimensions: 1600x1530mm Clamping force: 8000 kN

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine mit Roboter Dkodpfx Afsxac E Tjzou Hersteller: ARBURG Typ: 420C1000-250 Baujahr: 2007 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 35 mm Dosiervolumen: 144 ccm³ Spritzteilgewicht 132 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: WITTMANN, Typ: W818-8352, BJ 2016 -Förderband

Condition: like new (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, injection pressure: 2,500 bar, plate length: 695 mm, plate width: 695 mm, power: 49.5 kW (67.30 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 520 E 1500-400 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 40 mm screw High wear resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free water manifold circuits with optical flow indicator Conveyor belt – electric 6 electric heating control circuits for mold temperature control Full documentation available. Complete specification list available by email upon request. Dkedoxbpbkopfx Afzou

Condition: excellent (used), Year of construction: 2017, operating hours: 22,259 h, functionality: fully functional, machine/vehicle number: 235958, clamping force: 2,200 kN, Equipment: documentation/manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update – Tax Notice and Advantage for Used Machines Starting from July 1, 2025, used machinery will also be eligible for a special depreciation allowance of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine (Keyword: “Growth Booster,” § 7 section 2 EstG-E). Manufacturer: Arburg Model: 570S 2200/400-170 2-K with rotary table Control system: Selogica Year of manufacture: 2017 Operating hours: 22,259 h Machine number: 235958 Special Features/Maintenance Condition: Regular maintenance by the manufacturer and previous owner Documentation: Included documents: -- Original purchase invoice with additional items - Machine data sheet - Rotary table drawing Extras: - Hydraulic rotary table with 4 cooling circuits - 3 x core pulls Dkodpfx Afow Tt Erezju - Hydraulic accumulator for rapid movement - Opening stroke increased to 450 mm / installation height adjustable from 250 to 450 mm - High wear-resistant screw and cylinder units - Servo-regulated screw - Injection pressure increased to 2,500 bar - 2x air blow-off - Hold pressure switching - 15 electrical heating zones each of 2 kW - 2x needle shut-off nozzle - Colour dosing interface - High-performance cooler Machine data sheet available upon request. - Complete documentation and software included - German language - First delivery in Germany Clamping unit: Clamping force: 2,200 kN / 220 t Tie bar distance: 570 x 570 mm Platen size h: 795 mm x 795 mm Min. installation height: 250 mm (can be increased to 450 mm) Max. daylight: 900 mm Opening stroke: 650 mm (currently 450 mm due to increased installation height) Ejector stroke: 250 mm Ejector force: 100 kN Movable platen centering D: 125 mm Mold weight: kg Injection unit 1 (400 series): Screw diameter: 40 mm Shot weight in polystyrene: 184 g/PS Shot volume: 201 ccm Injection pressure: 2,500 bar High-wear resistant Injection unit 2 (170 series): Screw diameter: 35 mm Shot weight in polystyrene: 77 g/PS Shot volume: 85 ccm Injection pressure: 2,500 bar High-wear resistant Motor: 45 kW Heating: 9.7 kW / 5 zones Weight: 9,800 kg Available immediately ex-stock Hannover/Germany or delivered free to destination against reimbursement of freight costs. The machine is offered function-tested. It is our sole property. The requested machine is available immediately ex our Hannover warehouse, is offered in function-tested condition and can be inspected under power. For your information regarding the machines we offer and our company: - We only sell our own machines acquired from active production, ex-stock Hannover. - All machines are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a broker trading in third-party assets. - All offered machines come from successful companies where maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2015, Injection Moulding Machine ENGEL VC 330/180 tech – Duroplast Robot: ENGEL Viper 40 Control System: RC200-A03 Year of Manufacture: 2015 Clamping Unit Clamping force: 1,800 kN Tie-bar spacing (h × v): tie-bar-less design Platen dimensions (h × v): 880 × 830 mm Minimum mould height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar (max. 2,177 bar) Injection rate: 151 cm³/s Nozzle stroke: 500 mm Dimensions & Weight Net weight (with control cabinet): 11.7 t Dimensions (L × W × H): 3.72 × 1.35 × 2.02 m Additional Equipment ENGEL ecodrive SHV2 – servo-hydraulic drive system with low energy consumption and minimal noise level. Quick mould change – hydraulic 4-point system, 300 × 300 mm. Core control – 3 hydraulic circuits with volume measurement, graphic pressure/speed adjustment and position monitoring (Euromap 13). Duroplast package – reinforced screw, non-return valve, open nozzle, wear- and corrosion-resistant materials, cylinder and nozzle heating preparation (without cabling), requires feeder (e.g. rotofeeder). Djdpfxoxbrrxe Afzjku Automation Robot: ENGEL Viper 40 integrated with RC200-A03 controller. Material feeder: ROTOFEEDER BMC50 with inverter and dedicated software interface. Control unit: CC200 microcomputer with 15” TFT color touchscreen. Software Features VirtMould – machine simulation and training Ecograph – energy consumption analysis Performance charts Process charts (PD-Graph I) Minicam – process assistant Batch counter Alarm notifications via e-mail Weekly timer and USB data backup

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Dkodpfxjt Dx Hbs Afzeu Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Dkodow Tficepfx Afzsu Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2001, operating hours: 23,400 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 420C1000-250 Baujahr: 2001 Schließkraft: 100 Tonnen Dksdsw U Ebbjpfx Afzju Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 188 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Angußpicker, Hersteller: GEIGER

Condition: like new (used), Year of construction: 2021, operating hours: 301 h, machine/vehicle number: 257240, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, injection pressure: 2,000 bar, plate length: 637 mm, plate width: 637 mm, power: 42.7 kW (58.06 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 470 E 1000-170 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 30 mm screw High wear-resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free circuit water manifold with optical flow indicator Conveyor belt – electric 6 electrical heating circuits for mold temperature control Dsdpjxbn T Sofx Afzsku Full documentation available. Full specification list on demand via email.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, connection type: 3x400V, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg Djdpfx Asw Hq Hhofzeku

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. +F00 SN 158.719A Dkodot Dyl Sjpfx Afzsu

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ZHAFIR Typ: ZE2300III Baujahr: 2022 Schließkraft: 230 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 220 mm / 600 mm Dksdpsw U Dtiefx Afzju Öffnungsweg: 1.150 mm Schnecken DN 1: 55 mm Max. Hubvolumen: 570 cm³ Spritzteilgewicht in PS: 518 g Ausstattung: -Roboter -Kasakensteuerung -1 x Kernzug -Förderband -Schutzzaun Die Maschine wird ohne sonstige abgebildete Peripherie verkauft.