Used Infrared for sale (244)

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, number of slots in tool magazine: 180, controller manufacturer: Siemens, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, overall weight: 14,000 kg, table length: 630 mm, table width: 800 mm, controller model: 840D-Powerline, torque: 980 Nm, coolant supply: 40 bar, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, spindle motor power: 32,000 W, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 8,000 rpm, spindle speed (max.): 10,000 rpm, table load: 1,000 kg, operating hours of spindle: 22,963 h, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Nlsdpsui Np Rsfx Ad Sjc Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe Nljdpfx Adexpg H Hs Soc High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker Nljdpfx Ajt Rmhasd Ssc - Delivery to the left and right

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30" Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer Nljdpjvgt Dksfx Ad Ssc - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: used, Year of construction: 2016, operating hours: 60,546 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 40 kVA, torque: 96 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 16,000 rpm, overall weight: 10,000 kg, Machine make/type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / slots: Chain magazine / 240 positions Comfort operation terminal, main-time parallel setup Rotary table: 360,000° X 0.001° Coolant system: Knoll KF 400/50 bar Nlsdpfx Adeyglrqs Sec Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 X 400 Workpiece clamping: Mechanical Additional options, features: Drill breakage control (SBBK); FMS interface, infrared probe receiver (Renishaw), extraction interface; coolant chiller

Condition: like new (used), functionality: fully functional, This series of machines selects products using a high-precision electronic system that sorts tomatoes according to the desired color shade and, depending on application, allows the rejection of products of undesired color or possible foreign bodies from the product flow. Sorting characteristics: Sorting efficiency: 96% Vision system: Optical sensors Optical resolution: 25 mm Illumination: LED visible/infrared Nlsdpfx Aoynkdnod Sjc Degree of protection: IP65 Ejection system: Mechanical / pneumatic with lubricated air Working pressure: 5 ÷ 6 bar Conveyor system: Belt conveyor Cleaning system: Water with automatic pneumatic movement of the brush (timed operation). Electromechanical characteristics: Operating voltage: 400 - 480 V (3-phase + neutral), 50 - 60 Hz Power consumption: 1 kW Control voltage: 24 V DC Pneumatic connection: 7+8 bar, Consumption: 10 l/min, Temperature: 50ºC Hydraulic connection: 2+3 bar, Consumption: 0.3 l/min, Temperature: 25ºC.

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Technical Highlights: Nlodpfxewzabqj Ad Soc - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf Nljdpfx Aewzaiued Ssc Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Nledpfx Adsxw Uyqe Sjc Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Nlsdpfx Asxaungjd Sjc Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: used, Merck Millipore Direct Detect spectrometer enabling fast, accurate protein quantification with infrared technology for research laboratories. Nledpfjxzidrex Ad Sjc

Year of construction: 2026, condition: new, Model: X5600 Application: Micro-focus X-ray inspection of electronic components and assemblies such as BGA, CSP, SMT, wafer, SOP, QFN, sensors, and more. X-ray Source Specification Value Type Sealed micro-focus X-ray tube Voltage 40–90 kV Current 10–200 µA Max. output power 8 W Microfocus spot size 15 µm X-ray leakage ≤ 0.5–≤ 1 μSv/h (safety standard) Detector & Image Quality Specification Value Detector type TFT industrial dynamic flat panel detector Resolution pixel matrix 768 × 768 (sometimes 1.3 MP depending on configuration) Field of View 65 × 65 mm to ~130 × 130 mm Image resolution ~5.8 Lp/mm Frame rate ~20–40 fps A/D conversion 16 bit 🛠️ Mechanical & System Specifications Property Value Machine dimensions approx. L850 × W1000 × H1700 mm Max. sample size ~280 × 320 mm Net weight approx. 750 kg Power supply 220 V 10 A / 110 V 15 A 50–60 Hz Operating system Industrial PC (Windows 7/10 64-bit) Inspection mode CNC automatic multi-point inspection Tilt function ± 30° tilt & 360° rotation for multi-angle inspection Software & Features ✔ Automatic defect recognition: Y/N, crack, broken wire, offset, bridging, etc. ✔ CNC-controlled automatic inspection over multiple points. ✔ Infrared automatic navigation and positioning. Nlsdsymfmzspfx Ad Sjc ✔ Inspection report generation. ✔ Multi-angle & 360° rotation inspection for enhanced defect detection.

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 Nodsuddgfopfx Ad Sslc serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: new, Year of construction: 2021, functionality: fully functional, In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale) Control system: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Load capacity: 800 kg Width of T-slots: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel ranges: Travel distances X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y-axis Roller guides in Z-axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-type) / changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct spindle drive Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around the spindle Chip conveyors on the right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other: Swiveling control panel Electronic handwheel (wired) Centralized lubrication oil / air Full enclosure Work light Heat exchanger on the control cabinet Auto-Power OFF function Hand tool set Signal light Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic inlet pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (including chip conveyor, discharge to the left) Machine weight: approx. 5,400 kg (net) Existing special equipment: Spindle: - Direct drive spindle SK-40, 15,000 min-1 - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Tool drum magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis drive Coolant, chip, and compressed air management: - Bed flushing - IKZ coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder - Auto-Door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown in the picture with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW) - Full enclosure - Dual gripper Nljdpfjifn N Njx Ad Sjc available immediately

Condition: good (used), Year of construction: 1993, functionality: fully functional, SPECIFICATION Flexographic Printing Machine KDO, UK-made – 6 printing stations. - Web width for printing: 260 mm (10.5”) - Maximum unwinding diameter: 304 mm (12”) - Minimum unwinding diameter: 152 mm (6”) - Lateral adjustment: o 9 mm when the machine is stopped o 3 mm during machine operation - Unwinding: o Shaft diameter: 76.2 mm (3”) o Reel diameter: 450 to 500 mm - Rewinding – 2 stations, shaft diameter: 76.2 mm (3”) - Waste removal during die-cutting: o 2 stations, shaft diameter: 76 mm - Longitudinal slitting - Die-cutting device – 3 stations: 1. Label die-cutting station 2. Edge punching station 3. Cross perforation station - 3 cutting cylinders, 12” - Printing & inking stations – dual roller system: Nedpfxjx S Hxqj Ad Sjlc o Rubber roller o Anilox raster roller - Drying – each printing station equipped with a dryer, infrared lamp, and fan with adjustable drying power - Drive – electric motor 380/420 Volt - Power supply: 3 x 415V - One revolution: 12” (~30.5 cm) - Web guiding - Web activation station - Raster rollers: o 300/20 LPI – 3 pcs. o 450/14 LPI – 3 pcs. - Printing cylinders: o 12” – 6 pcs. o 11” – 6 pcs. - Ink trays – 6 pcs.

Condition: new, overall weight: 400 kg, Uras 3-Head Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi 3 Print Heads: 1800mm Thanks to the high-speed print heads featuring new technology, you achieve powerful results at low production costs with a print speed of 110 m²/hour in 2-pass mode. Highlights: - 3 x 4720/3200i Print Heads with 2400 dpi high resolution - 2-stage ink system (220 ml ink cartridge and 1.5 l ink tank) - Integrated housing heater, infrared heater, and fan system - Unwinding spindle to prevent paper bubbling - Printing up to 600 meters with tension rewinding system - 2-pass mode (360x1200 dpi) 110 m²/hour Product Specifications: - Print Heads: Piezo print head, 3 units (3200i/4720) - Media: - Width: 1820mm - Thickness: 1 mm or less - Weight: up to 60kg - Max. print width: 1800mm - Color unit: 4 x 220 ml cartridges and 1.5 l color tank - Print resolution: 2400 dpi - Print modes: - 2 passes (360 x 1200 dpi): 110 m²/h - 3 passes (360 x 1800 dpi): 84 m²/h - 4 passes (720 x 1200 dpi): 74 m²/h - Media drying system: Integrated housing heaters, infrared heaters, and fan system Nlodpfoq Rd Nuex Ad Sjc - Interface: USB 3.0/LAN - Power specification: AC 220V ± 10%, 50/60 Hz - Dimensions: 3190 mm (L) x 650 mm (W) x 1030 mm (H) - Net weight: 400kg Condition: Display item, very few prints. All information provided without guarantee. Financing through our bank is also available. komplett-konzept.leasingo.de More printers in different sizes – new and used – can be found in our shop! International shipping rates on request!

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Nljdjuzhcuepfx Ad Sec Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Nlodpfx Adjwbqrto Ssc Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm Nlodpex Hg Ibjfx Ad Sec • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Nedpfx Aoyi Ud Ujd Selc Stroke: 400 mm automatic crowning Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system lateral movable safety fences LAN network operation infrared light curtain at the front and rear Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Year of construction: 2021, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Nljdpfotxakxex Ad Soc Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2021 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. - Condensation control: this prevents unwanted condensation in the chamber and possible contamination. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Nlodpfetxaczsx Ad Soc Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: used, PHCbi MCO-170AICUVH-PE CO2 incubator cabinet H2O2 decontamination Temperature: AT +5 ~ +50, ±0.1 °C Temperature uniformity: ±0.25 °C CO2 control range and fluctuation: 0 ~ 20, ±0.15 % Year of construction: 2020 Dimensions: 650mm x 620mm x 1000mm ( outside ) 480mm x 500mm x 650mm ( inside ) Weight: approx. 80 kg PHCbi Creating successful cell cultures requires an incubator that offers a high level of precision and safety and is easy to use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and in some models O2) control when processing different cell cultures. These deliver long-term performance, are highly reliable and efficient. - inCu-saFe® interior (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper and the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: the UV lamp isolated from the cell cultures decontaminates the circulating air and the water in the water tray without harming the cell cultures. - H2O2 decontamination technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2, enabling time-saving and documented decontamination in the chamber with a high degree of safety. Electronic door lock that automatically locks the chamber during the decontamination phase. - Dual hot air sterilization (+ 180 °C). No interference and uninterrupted operation with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Long-term good performance, optimal cell viability and successful experiments. It also enables precise control of CO2 concentration and temperature with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: high-precision temperature control for advanced temperature stability and fast temperature recovery times after opening the door. - Fast CO2 recovery times: with the PID controller and the dual infrared sensor, an ultra-fast CO2 recovery time is achieved without overheating. Even after opening the door several times. - The unique solid-state O2 zirconium oxide sensor in the multigas incubators enables precise control of physiological oxygen concentrations to simulate in vivo conditions. Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Nlodpfx Adetxarce Sjc Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Nodpfx Adexqgxro Sslc

Condition: ready for operation (used), A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible. Nljdpfx Ajxg Ritsd Ssc