Used Infrared for sale (240)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Bodpfex D Iuzsx Adrsdd Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Bdjdpfx Adjy D Ilcsrjd Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window Bjdpfx Ajy D Hvaedredd • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: new, Year of construction: 2025, Manual die cutting and creasing ML-1500 Inner chase size (mm): 1500 x 1040 Automatic oil system Infrared security barrier Max. rule length (m): Bedpfx Adjxluagjrsdd

Condition: new, Year of construction: 2025, Guowei 68 - available immediately on stock in Europe Product Description： Cutting knife and paperweight are controlled by hydraulic transmission. Fully hydraulic drive makes the machine more secure and imported hydraulic parts ensure the stability of the system. The machine has the function of a reference setting and keeping, and the effectiveness of the reference and self-diagnostic function; infrared protection and hands button interlock protection device; precise paper pusher guide, high precision of alignment and rear angle. Computer system adopts 10-inch colorful full-touch screen, servo motor driven,. The data resolution is 0.01mm, with self-diagnostic function and operation mode display, 100 program groups, more than 10,000 different cutting positions, dynamic tracking, max paper pushing speed 5-10 m / min, and it has imported hydraulic components; electric components from France, Japan, Korea. Its key parts adopt imported bearing of low maintenance. Model / Specifications 68 Cutting width(cm) 68 Max.cutting height without assistance pressing plate(cm) 8 Max.cutting depth(cm) 68 Min cutting depth without assistance pressing plate(cm) 2 Extended length of working table(cm) 53 Height of working table(cm) 92 Machine width including side working table(cm) 126 Total length of working table(cm) 150 Bodpfx Aeu Rz S Isdrsdd Cutting speed(r/min) 20 Max. Paper pressure(n) 10000 Power of main motor(kw) 2.2 Servo Motor for paper feeding(kw) 0.4 Machine weight(kg) 800 Overall dimension(L × W × H)(cm) 167*137*172

Condition: new, Year of construction: 2025, Available immediately in stock in Europe Infrared safety device Automatic oil pump High-Quality Performance: The TYMB 1040 machine is designed for commercial use, featuring a gross power of 19kw and a flat bed printer plate type, ensuring efficient and precise printing results. Multi-Functional Capabilities: This machine can be used for various applications, including paper printing, label printing, card printing, and tube printing, catering to diverse user needs. Bodpfxeu Uzb Us Adrodd Competitive Price: As a new product with a competitive price, the TYMB 1040 offers an excellent value proposition for businesses looking to upgrade their printing capabilities without breaking the bank. CE Certification and After-Sales Support: The machine is CE certified and comes with engineers available to service machinery overseas, providing users with peace of mind and reliable after-sales support. Durable Construction: With a weight of 5t and dimensions of 2250x2200x2000mm, Show less

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,000 mm, conveyor belt width: 600 mm, overall weight: 50 kg, Here we offer a fully functional counting conveyor belt (conveyor belt with infrared counting sensor – digital counter). Manufacturer: M-Fördersysteme Bsdpfxoxz Rvvs Adrsdd Year: 2007 – lightly used 16A connection 6 units available

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit Bdjdpfxew U Dt Ae Adrsd 7846 Hours The diodes are in very good condition, as can be seen in the pictures.

Year of construction: 2008, condition: used, Year: 2008 Condition: Funkcional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets Bdedpjy H Hgdsfx Adrod o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: ready for operation (used), Year of construction: 2017, A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible. Bdedpfxoy Hvqxo Adrod

Condition: good (used), functionality: unexamined, machine/vehicle number: WB0C22AA400210418, empty load weight: 1,238 kg, maximum load weight: 1,462 kg, overall weight: 2,700 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,350 kg, permissible axle load (axle 2): 1,350 kg, first registration: 02/2023, next inspection (TÜV): 05/2027, loading space length: 3,560 mm, suspension: steel, tire size: 195/70 R 14, tire condition: 50 %, maximum speed: 100 km/h, color: black, trailer brake: trailer braked, our vehicle number: # 30658 Böckmann Grand Master SR C22 Bodpfex E Rwwex Adredd Horse inhalation trailer conversion Platinum Animal with ionization unit Type I (stationary concentrator) Ultrasonic nebulizer micro 801 Animal JSR Fogger cold fogger 2x infrared heating panels lowered WCF chassis aluminum floor poly body with poly hood walk-in tack room shock absorbers for 100 km/h approval 14" aluminum rims 195/70 R 14 tires automatic jockey wheel lockable ball coupling rear ramp with gas pressure struts as lifting aid manual tarp lift shunting handle roof ventilator 2 sliding windows left/right (each) 2 feed troughs 2 saddle racks LED interior lighting Multi-Safe system, padded sides + side wall padding central post partition with padding external power socket

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Weight: 5,100 kg Connected load: 22 kVA Operating hours Spindle hours: approx. 9,980 h Bdodpfxjyznvcj Adrjd Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo Bdedpfx Adoyvkuqerjd

Year of construction: 2003, condition: ready for operation (used), Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible. Bdodpoy E S Drofx Adred

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Bdodpfx Ajxhfzgedrod Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): Bdsdpot N Ix Rsfx Adrjd No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 Bdsdpfx Adoy Ep S Rsred • 1x fixed aperture holder • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture • 1x 100 μ aperture • Various tools (tool kit) and sealing rings • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: new, Year of construction: 2026, Features The unit quickly and quietly cleans and filters the air in your workspace. Clear LED display control panel located at the front of the machine. Filters 98% of all dust particles down to 5 microns and 85% of particles as small as 1 micron. Infrared remote control for easy operation — choose between three fan speeds, set the timer, and power the unit on/off. Remote control with automatic shut-off time recording included as standard. The unit can be suspended from the ceiling, providing faster and more efficient air cleaning through better air circulation. Applications Shops Workshops Garages Warehouses Laboratories Schools Kitchens Spray booths Carpentry and joinery shops Scope of delivery: Bedpjycvbbsfx Adrjdd Air filtration unit Mounting eyelets (for easy hanging installation) Remote control Technical data Motor power 150 W Voltage 230 V / 50 Hz Maximum air flow (3 speeds) Low: 840 m³/h Medium: 1080 m³/h High: 2030 m³/h Air velocity (3 speeds) Low: 14 m/s Medium: 19 m/s High: 22 m/s Timer settings 1/2 | 1 | 2 | 4 hours Pre-filter (mesh filter) 5 µm Main filter (bag filter) 1 µm Dimensions 710 × 610 × 310 mm Weight 29 kg Manufacturer: Cormak

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Bdedpfx Adeykuh Njrjd ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Bsdpjykud Rsfx Adrodd Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Bodpfx Adsyktrtjrodd TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, mileage: 62,950 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, power assisted steering, seat heater, - Electronic window actuator - left - Electronic window actuator - right Bdjdpfxey D Dngs Adred - In order to provide you with the best possible advice, we kindly ask you to make an appointment. Mr. Kiel will be pleased to assist you, Tel: BA3 Active Brake Assist, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C1L AMG front bumper with decorative elements in black, C74 Mercedes-Benz illuminated entry badge, CF8 Sports suspension, CL1 Steering wheel adjustable in tilt and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, CN1 Exterior side sills, CU4 Aerodynamics package, D12 Roof rails, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1F 26 cm (10.25") display, E1T Touchpad, E4S Smartphone integration package, E6M MBUX multimedia system Mid, E70 Switch position lower control panel, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk / load compartment, ES3 12 V sockets for 2nd / 3rd row of seats right and left, ET4 Active distance assist DISTRONIC, EX8 Navigation Plus, EZ5 Parking package, EZ8 PARKTRONIC, F3S Exterior mirrors painted black, F65 Exterior mirrors, power-folding, F66 Lockable glove compartment, F69 Ext. mirrors, F72 Auto-dimming exterior and interior mirrors, F84 Digital interior mirror, FB1 AMG trim elements, FB4 AMG rear spoiler lip on tailgate, FC1 Electronic key with chrome look, FG0 Center console with roller cover, FK4 Radiator grille painted black, FP3 Mirror package, FR8 Reversing camera, FS5 Illuminated mirrors for sun visors, FZ8 Comfort opening and closing with infrared remote control, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H15 Heated seat for passenger, H16 Heated seat for driver, H20 Heat-insulating all-round glazing, HH4 THERMOTRONIC automatic climate control, HZ7 Semi-automatic air conditioning TEMPMATIC in rear, IN1 Wheelbase 3200 mm, short overhang, J55 Seat belt warning system for passenger seat, JA1 Warning lamp for windshield washer fluid level, JA7 Blind spot assist, JA9 Traffic sign assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP1 PRE-SAFE, JP2 Assist package, JW5 Lane keeping assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Misfuel protection, KB5 Main fuel tank 70 liters, LA2 High beam assist, LC4 Comfort roof control unit, LC5 Surround lighting in exterior mirrors, LC6 Reading light in 2nd row grab handle, LC7 Footwell lighting front, LC8 Surround lighting tailgate, LC9 Ambient lighting in cockpit, LE1 Adaptive brake light, LG2 LED Intelligent Light System, LG4 Rear, brake and indicator lights in LED technology, LP3 Interior lighting package, LP4 Logo projection, MJ2 ECO display, MJ8 ECO start/stop function, MO6 Emission class Euro 6d, MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800 rpm, MX0 BlueEFFICIENCY package, PS2 AMG Line, Q50 Removable tow ball, QA4 Towing capacity 2500 kg, RK4 AMG alloy wheels 8 J x 19, gloss-turned, RY2 Tire pressure monitoring front and rear, wireless, S00 Airbag control unit Generation AB12, S37 Outside armrests for individual seats, 2nd row, SA1 Seat cushion depth adjustment driver, SA2 Seat cushion depth adjustment passenger ... Metallic paint, alloy wheels, electronic immobilizer, ESP, navigation system, particle filter, warranty, ...

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Bodsy A H Tpepfx Adrodd Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 68,648 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, table length: 1,800 mm, table width: 1,800 mm, spindle speed (max.): 10,000 rpm, overall weight: 36,000 kg, tool weight: 12,000 g, controller manufacturer: HEIDENHAIN, controller model: iTNC530, number of slots in tool magazine: 10, number of axes: 5, This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained. Bdjdpfx Adjywlv Ejred Machine Benefits Qualitative Machine Benefits • Good condition! Technical Machine Benefits • Spindle motor power/torque 25 kw / 195 nm • B-axis (head) -2°/+92° • C-axis table n x 360° • Working feedrates x, y, z 30. 000 mm/min • Rapid feedrates x, y, z 3 m/sec² • Through spindle coolantMachine options: Connection station for high-frequency finishing spindle IMT ● HEIDENHAIN probe for workpiece positioning and measurement, infrared transmission ● BLUM probe - for tool measurement, laser - non-contact ● Tool cooling with liquid through the center of the spindle + external nozzles ● Lift Off - prevents the Z axis from sinking and damage to the part in the event of a power failure Technical Specification Taper Size HSK 100

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Bodsy Alwgepfx Adrsdd Capacity: 2000 l Throat diameter: 250 mm Power: 75 kW Electrical supply: 400 V 50 Hz Dimensions: 3200 mm x 1900 mm x 2800 mm Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.