Used Infrared for sale (247)

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Hjdpfey Shgvex Ag Iofg Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Hsdpfx Aowhdhzog Ijfg Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Width: 900–1260 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: Hfodpfxsy N U Rce Ag Ijg • Longitudinal cuts: 5 • Longitudinal trimming units: 2 • Minimum part width: 160 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) (alternative: 3500 kg) • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, total length: 6,980 mm, total width: 2,474 mm, total height: 3,260 mm, loading space length: 4,270 mm, loading space width: 2,130 mm, loading space height: 2,280 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 67238 Errors and prior sale excepted! ---- Hodpfeyumrbox Ag Ijfg SPECIAL EQUIPMENT * Passenger airbag * Batteries: 2 AGM batteries – including extended battery operating time up to 30 minutes * Bi-xenon headlights with static cornering light, LED daytime running lights – including headlights with static turning light * Seat Package 8A: Driver's seat, 4-way adjustable – Front passenger double seat – Height-adjustable headrests – Individually and variably heated driver's seat & outer passenger seat – Fold-out tray on passenger double seat – Inner armrest for driver – Lumbar support for driver – Seat upholstery: fabric – Heated leather steering wheel * Technology Package 15: Exterior mirrors electrically adjustable, foldable and heated – Blind Spot Assistant incl. Cross Traffic Alert – Ford audio system – Fog lights – Pre-Collision Assist, camera and radar-based – Lane keeping assistance – Extended traffic sign recognition system – Front park pilot system – Adaptive cruise control with Stop & Go function – Reversing camera – Navigation system * Body conversion: Lightweight ALUVAN box body – Palfinger tail lift with lifting and tilting cylinder (level compensation load capacity 750kg) – Two-hand operation – Rear portal with gas spring-operated upper hatch incl. closing aid – 2 rows of slat lashing rails FURTHER EQUIPMENT * Driver's airbag * ABS with electronic brake-force distribution – ESP with traction control – Hill start assist – Crosswind assistant – Safety brake assistant – Rollover protection – Emergency brake assist including emergency brake light * Exterior mirrors, short arm – with integrated indicators * Battery: Battery runtime, programming battery runtime to 10 min * Rubberized floor up to the partition * On-board computer with consumption and mileage data (e.g., remaining range), plus outside temperature display and Ford ECO Mode * Roof, overhead storage compartment front * Headliner in driver's cab * Roof marker lights * Electric windows – with quick-down/-up function on driver's side * Electronic parking brake * Ford Easy Fuel – comfort fuel filler and misfuel prevention system * FordPass Connect incl. live traffic information and WLAN hotspot, 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Additional lockable glove compartment * Interior lighting with delayed switch-off and front reading lights * Automatic climate control * Headlight range adjustment * Emergency call assistant * Particle filter: Diesel particulate filter * Radio: 12" multifunction display and Ford SYNC 4 communication and entertainment system with voice control and Bluetooth & USB interface – Multiple telephony features – Music playback – Media support – Emergency call assistant – Ford Power-Up software updates – AppLink (wireless) – Support for Android Auto and Apple CarPlay – Capacitive touchscreen technology – 15 selectable languages, graphical and acoustic * Full wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel rims 6.5 J x 16 with 235/65 R16 tires * Windscreen wipers with rain sensor * Headlights: Halogen dipped headlights with daytime running lights * Power steering * Seat belts – seat belt tensioners and force limiters at the front * Start-stop system * Air recirculation/heating front * Immobilizer * Infrared-reducing, lightly tinted glazing * Central locking with remote control – 2 keys, one with remote

Year of construction: 2017, condition: used, Empty bottle inspector for monitoring empty glass bottles. The machine uses cameras, high frequency, and infrared to inspect the following criteria: - Contour, height, color - Side wall - Residual lye detection - Mouth - Thread - Residual liquid detection - Bottom inspection - Glass shards and film detection - Sealing surface inspection Bottles that do not meet the specifications are ejected via pushers. Additional title: Straight-running machine in modular design Current: 6 A Hfodjyr Ifkopfx Ag Ijg Voltage: 400 / 230 V Frequency: 50 Hz Water: 3-5 bar Compressed air: 6-10 bar, 1/2" connection Length: 2980 mm Formats: 1,0 l; 0,5 l; 0,2 l Running direction: right -> left Operation / Control: Simatic S7-300 Position: standing on feet Base construction: straight-running Features: camera, side wall modules, test bottle detection, high-frequency and infrared inspection, side opening inspection, thread inspection, sealing surface inspection, light barrier, pushers at inlet and outlet, diversion control, operating panel

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Hsdpfxjxyktls Ag Iefg Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen

Condition: used, Year of construction: 1991, Nominal capacity of filler: 60000 b/h Power: 10,7 kW Water: max. 4 bar, consumption: 1,3 l/min Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h Length: approx. 2.995 mm Width: approx. 2.370 mm Height: approx. 2.600 mm Weight: 5200 kg Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm Machine partitioning: 94 mm Hsdevcqyhspfx Ag Iefg Operation / Control: Siemens S5 Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Hodsy Ndg Topfx Ag Iofg Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA Hodpfjyxy E Rsx Ag Ijfg weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AH/119433, functionality: fully functional, Equipment: CE marking, Touch screen control monitor Premilling heads Spray system in front EVA hotmelt glue station (2pcs.) Premelting unit Infrared ceramic lamp Endcutting unit Trimming unit Corner rounding unit Round 4/A - pneumatically changed for two corners (1mm and 2mm) Edge (corner) scraping unit SCR/S (pneumatically changed between two radius scraping - 1mm and 2mm) Glue (flat scraping) unit Oscilating brushing unit Hfjdpfx Agsv R Hage Ieg Hot air for edge finish Panel thicness 10 ÷ 60 mm Edge thickness 0,4 ÷ 15 mm Feed speed 10-22 m/min It has no servo drives, but due to pneumatic changes of corner units and scraper - it can be adjusted to work with 3 edge dimensions - rough trimming for 0.4mm, and with the corner units (4pcs.) 1mm and 2mm edge.

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Hjdpeya I Iujfx Ag Iofg Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to Hfedpfxoynhwfs Ag Ijg 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included Hfodpfx Agey Ifp Hs Ijg • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input • Additional 4th axis: Walter CDS 22 rotary table/indexing unit Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HAAS control (LCD screen, intuitive programming) Table size 914 x 356 mm Table load capacity 680 kgs X-axis travel 762 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 12000 rpm Rapid traverse X/Y/Z = 35,6 m/min Tool magazine 24+1 positions (arm type) Hfodpfx Asy Ifbcog Ieg Spindle power 22.4 kW Spindle taper SK40 Machine weight approx. 3 630 kg Dimensions (L x W x H): 2 500 x 2 400 x 2 600 mm Accessories, equipment - Electric MPG - Coolant system - Internal coolant supply - Chip auger - RENISHAW infrared tool measuring system with probe - 4th axis preparation - Power failure detection - Machine manuals - Machine mounts The machine is in very good condition and still powered on. It was purchased as a new machine in Hungary. It was used in clean and professional environment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Hodpfx Agsy Hrn Ho Isfg Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm Hedpepumdcjfx Ag Iefg total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Hodpfoyi Dnisx Ag Isfg Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Hfodpfxewcggve Ag Ieg Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: new, Year of construction: 2025, Manual die cutting and creasing ML-1500 Inner chase size (mm): 1500 x 1040 Automatic oil system Infrared security barrier Max. rule length (m): Hedpsxluagsfx Ag Iofg

Condition: new, Year of construction: 2025, Guowei 68 - available immediately on stock in Europe Product Description： Cutting knife and paperweight are controlled by hydraulic transmission. Fully hydraulic drive makes the machine more secure and imported hydraulic parts ensure the stability of the system. The machine has the function of a reference setting and keeping, and the effectiveness of the reference and self-diagnostic function; infrared protection and hands button interlock protection device; precise paper pusher guide, high precision of alignment and rear angle. Computer system adopts 10-inch colorful full-touch screen, servo motor driven,. The data resolution is 0.01mm, with self-diagnostic function and operation mode display, 100 program groups, more than 10,000 different cutting positions, dynamic tracking, max paper pushing speed 5-10 m / min, and it has imported hydraulic components; electric components from France, Japan, Korea. Its key parts adopt imported bearing of low maintenance. Model / Specifications 68 Cutting width(cm) 68 Max.cutting height without assistance pressing plate(cm) 8 Max.cutting depth(cm) 68 Min cutting depth without assistance pressing plate(cm) 2 Hfedju Rz S Iepfx Ag Ieg Extended length of working table(cm) 53 Height of working table(cm) 92 Machine width including side working table(cm) 126 Total length of working table(cm) 150 Cutting speed(r/min) 20 Max. Paper pressure(n) 10000 Power of main motor(kw) 2.2 Servo Motor for paper feeding(kw) 0.4 Machine weight(kg) 800 Overall dimension(L × W × H)(cm) 167*137*172

Condition: new, Year of construction: 2025, Available immediately in stock in Europe Infrared safety device Automatic oil pump High-Quality Performance: The TYMB 1040 machine is designed for commercial use, featuring a gross power of 19kw and a flat bed printer plate type, ensuring efficient and precise printing results. Multi-Functional Capabilities: This machine can be used for various applications, including paper printing, label printing, card printing, and tube printing, catering to diverse user needs. Hfsdpfx Asu Uzb Ueg Ijg Competitive Price: As a new product with a competitive price, the TYMB 1040 offers an excellent value proposition for businesses looking to upgrade their printing capabilities without breaking the bank. CE Certification and After-Sales Support: The machine is CE certified and comes with engineers available to service machinery overseas, providing users with peace of mind and reliable after-sales support. Durable Construction: With a weight of 5t and dimensions of 2250x2200x2000mm, Show less

Condition: excellent (used), Year of construction: 2024, CNC Machining Center Hedelius T7 – 2600 1 R Magnum Control: Heidenhain TNC 7 Year of manufacture: 2024 Internal machine no.: 56 Travel distances: X-axis L/R 2,600 / 2,030 mm Y-axis 750 mm Z-axis L/R 695 / 800 mm Pendulum operation: 760 / 1,300 mm Total clamping surface: 3,080 x 750 mm Table load capacity: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter: 1,100 mm Workpiece weight approx. 500 kg Spindle taper: SK 40 Tool magazine: 50 positions Spindle speed: 50 - 14,000 rpm Power: 29kW Equipment - KinematicsOpt - Hand-held control device HR 510 FS - Compressed air nozzle at the spindle head - Inclined bed belt filter system 900l - Internal coolant supply (ICS) 25 bar - Infrared receiver M & H - 3D infrared probe M & H 25.50 - Tool setter - Exhaust filter Hjdpfxsy Ew Ebe Ag Iofg - Partition wall - Blow-off guns - Rinsing guns

Condition: new, Year of construction: 2021, functionality: fully functional, Ladies and Gentlemen, Brand new Erhardt+Leimer web edge control systems are for sale, which have been installed but have not been used to this day. Ultrasonic edge sensor POE FX 46: Hfodpfx Aoi Hl Hhog Isg Compact ultrasonic edge sensor with digital evaluation Measuring range ±3 mm Insensitive to contamination by dust Scanning soundproof materials such as paper, plastic and metal foils regardless of material transparency Internal temperature compensation for stable operating point Bar display to show the current edge position or diagnostic information PoE interface to the data network center _____ FR 6011 broadband sensor infrared: digital, measuring range +/- 79mm, clear width 40mm, with cable 3000mm long with cable gland M16x1.5 and JST female connector 00367440 More details on request. Current delivery time according to E+L: approx. 10-12 weeks after receipt of order or payment in advance _____ Web guides/web edge control as shown, including monitor Production date is mid/end of 2021 (see type plates). 7x DRB14 rotating frame system EL.NET for controlling a running web, with digital position controller with touch display. Including connection cable. Sensor type: FR 6011 IR broadband sensor Nominal width: 250 mm Roller diameter: 60 mm web tension max.: 300 N Correction path max.: 42 mm If you need more precise data, please ask us or give us a call.

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 430, spindle speed (max.): 18,000 rpm, operating hours of spindle: 28,000 h, coolant supply: 40 bar, Equipment: chip conveyor, IKZ (internal coolant supply) NC rotary table (C-axis) NC swivel head Tool holder: HSK 63 FD function Hfedpfoy Ep Rtsx Ag Isg Pallet changer Measuring systems: infrared probe for workpiece measurement Additional magazine with 120 spaces Spindle has already been replaced

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: Hodpfx Agew U Dt As Isfg 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.