Used Induction Heating Device for sale (25,215)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Gujdpfx Anow Hwp Nsgsh

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with a series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 kVA Guodezdp H Sepfx Angeh In like-new condition! Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Guedpfx Aszu Ikkjngeh Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Gujdpfxjvw S Rws Angoh Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: good (used), Year of construction: 2017, heating cooling device HB Therm 100 Z1 Serie 5 Wasser, 100°C 9 KW new Service ! (art.3179) Gsdpfx Anjwhygyjgjuh year: 2017-2018 price: 3.250 € contact: Mr. Rainer Eckerle

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 140°C 9 KW + new Service ! Gsdpfx Aokn Elnsngjuh year: 2017-2018 price: 4.650 € contact: Mr. Rainer Eckerle

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 160°C 9 KW + new Service ! year: 2017-2018 price: 4.950 € Godpekn Enusfx Angeuh contact: Mr. Rainer Eckerle

Year of construction: 2018, condition: good (used), heating cooling device HB Therm 160 Z2 Serie 5 Water, 160°C 17 KW year: 2017-2018 Guedpfx Aek Tapwengoh price: 5.950 € contact: Mr. Rainer Eckerle

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles Guedpfedz Spwex Angeh - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: excellent (used), LECTROTHERM AJAX TOCCO INDUCTION HEATING Power supply Inductron Inductotherm 330kw Gusdpfx Aefhnwysngjh

Year of construction: 2008, condition: good (used), heating cooling device Regloplas 90 XL M 90°C 21,5 kW year: 2008 price: 2.150 € contact: Mr. Rainer Eckerle Gjdpfxoh Uubhs Angjuh

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz Gsdpfx Anezkf Thegeuh · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Year of construction: 2018, condition: good (used), heating cooling device180 Z2 Serie 5 Water, 180°C 17 KW New Service ! Gusdpfxok Tap To Angeh price: 7.950 € contact: Mr. Rainer Eckerle

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg Gusdpeb A Ix Sjfx Angsh

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, For sale: an industrial induction melting and holding unit, model IH-40-HNK, manufactured by INDUCTOR Kft. The unit was manufactured in 2015 and features a water-cooled, medium-frequency induction system. Technical Specifications Manufacturer: INDUCTOR Kft. Model: IH-40-HNK Year of manufacture: 2015 Gujdpfx Anjzy Ng Regsh Power output: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current draw: 70 A Water-cooled inductor Stainless steel, insulated melting vessel Estimated vessel capacity: approx. 200 liters Modern medium-frequency IGBT power electronics PLC/HMI control system Control cabinet weight: 190 kg Applications Aluminum melting Aluminum holding Foundry operations Metal processing plants

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Gusdpfsupia Nox Angjh Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Gusdpfx Aneua E Rqegjh

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides Gjdpfexbgrgex Angouh • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Year of construction: 2002, condition: used, heat exchanging device, 4 bar, year: 2002, price: 1.500 €, contact: Herr Rainer Eckerle Guedps Saauofx Angjh

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. Gjdpfx Anez Ix D Sogeuh • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Gusdjimdtvepfx Angsh Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m Gusdpfx Ajykvdlongoh - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: good (used), Rehsler TW HL4006D industrial water chiller The Rehsler TW HL4006D is an industrial water chiller specifically designed for cooling the high-performance Trumpf Haas HL 4006D laser. The system is used to dissipate the waste heat generated during the laser process, thereby ensuring consistent operating performance. The device is primarily used in automated production lines, often in conjunction with industrial robots, where the associated laser is used for welding highly reflective materials such as aluminum or copper. Technical data at a glance: The device is characterized by the following performance parameters: - Cooling capacity/rated power: 11 kW. - Electrical connection: 400 V voltage with a current draw of 18 A. - Operating pressure: Permissible pressure of up to 10 bar. - Protection class: IP54 (protected against dust and splashing water). - Temperature range: Suitable for ambient temperatures of at least 5 °C up to a maximum of 43 °C. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! Godsxg Hmnspfx Angouh International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! Guedpfx Aox Ihiisngsh International shipping costs on request!

Condition: used, This listing is for a Thermo Scientific Heat Block Guedpfx Anoxv D A Esgoh The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.