Used Index Ms 42 C for sale (143)

Condition: like new (used), Year of construction: 2023, turning diameter 620 mm turning length 1500 mm control Siemens 808D spindle bore 100 mm turning diameter over slide 420 mm spindle turning speed range 10 - 4000 U/min main drive 41 kW rapid traverse speed 10000 mm/min total power requirement 65 kW weight of the machine ca. 9 t dimensions of the machine ca. 6,4 x 3,0 x 2,5 m Control unit CNC Siemens 808D new Drives/Servomotores, 24 month warranty on equipment - Chip Conveyor - Tool cooling system - Tailstock Dodpfx Abelar N No Tjwf - Tool changer (Tower) with 8 positions OPTIONAL INCLUDED - - piece support (Lunete)

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm Djdewzynqspfx Ab Tewf y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: used, Year of construction: 1996, functionality: fully functional, turning length: 800 mm, turning diameter: 280 mm, spindle bore: 65 mm, travel distance X-axis: 310 mm, travel distance Z-axis: 870 mm, spindle motor power: 22,000 W, rotational speed (max.): 4,000 rpm, total height: 2,200 mm, total length: 4,100 mm, total width: 2,000 mm, overall weight: 4,600 kg, swing diameter over bed slide: 400 mm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are happy to assist you with your inquiries by phone. Dedpow Nn Elefx Ab Tswf

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW Dedpjt Hw Atofx Ab Tswf weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 500641, turning length: 710 mm, turning diameter: 300 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 710 mm, total height: 2,150 mm, total length: 2,150 mm, total width: 3,160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore (collet clamping): 65 mm Spindle diameter at front bearing: 110 mm Maximum speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100%): 275 Nm Max. power (100%): 43 kW Tailstock Electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Traverse X-axis: 215 mm Traverse Y-axis: 180 mm Traverse Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 7.5 m/min Rapid traverse Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Carrier Dwodpswxw Upefx Ab Tjf Number of tools: 12 Tool system DIN 69 880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Footprint (710): 4,140 mm x 2,155 mm Installation area (710, without bar feeder): 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main line fuse: 35 to 125 A EQUIPMENT Milling spindle set 6-position tool changer HKS-50B KM40 Material removal unit Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height: 1,250 mm Coolant fine filtration: hydrostatic paper band filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750

Condition: as good as new (ex-display), Photo No. 1408 As-new VDI40 DIN 69880 toolholder collet chuck Collet: DIN 6388-A; Type: 444E Item No.: 433011- More VDI40 tool holders can be found at www:wk-sales.de Collets DIN 444E or ER 40 with clamping nut. The collet shown in the image is for illustration purposes only and is not included in the scope of delivery ø 13-14mm Dwjdpfsk Nz Ehjx Ab Tsf External diameter: 50mm External clamping length: 65mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, INDIVIDUAL MODULES: 1. SEMI-AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unloading glass bottles from pallets; requires one operator to place the pallet into the machine and remove the cardboard sheets inserted between the bottle layers. Dedpfx Ajw Hg Hqjb Tewf 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of bottles prior to filling. 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling hot product into cylindrical glass bottles. 4. CLOSING MACHINE FOR TWIST-OFF CAPS (model: IND-Close 12E) for vacuum sealing filled bottles using a steam-injection-induced vacuum system. 5. PASTEURIZATION AND COOLING TUNNEL (model: PT 42-9) for continuous pasteurization and subsequent cooling of the product. 6. VACUUM TESTING MACHINE (model: IND-Test 61) for detection and rejection of improperly sealed bottles. 7. DRYING MACHINE (model: IND-Blow 86) for removing residual moisture from the bottle surface prior to labeling. 8. LINEAR LABELLING MACHINE FOR SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over cap) and side label application on cylindrical bottles. 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing bottles onto cardboard trays in various configurations according to bottle size. 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) interconnecting the line modules, including covered conveyors between rinsing, filling, and closing sections.

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. Dwodpevzcnzefx Ab Tjf The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm Dwjdjt U R Hzepfx Ab Tjf sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: used, Year of construction: 1998, turning diameter 200 mm turning length 400 mm control SIEMENS SINUMERIC 840 C Dwodot Hw Rkspfx Ab Tof total power requirement 40 kW weight of the machine ca. 6.500 kg dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) Djdpfx Abowab Rdj Tswf • Spindle bore: 230 mm (can be extended up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: good (used), Year of construction: 1997, Index ABC Year of manufacture 1997 Machine number 400621 Dwedpohd U Hfefx Ab Tjf Spindles: 1 Max diameter: 50 mm turrets: 2 Positions: 8 on turret 1 / 6 on turret 2 C axis is programmable 1 synchronous spindle in the machine + 2 for regeneration High pressure pump: yes, 30 bar

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line EQUIPMENT Dwodpfjwylz Tox Ab Tsf Tool changer Electronic shaft for spindles and drive systems Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dwedpfx Absvzcnbe Tof #Tags: V-300 | V 300

Condition: used, functionality: fully functional, spindle bore: 12 mm, feed length Z-axis: 50 mm, Automatic single-spindle lathe for screws Dwsdpfowvigrex Ab Tjf

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Djdpfx Aot Hw Sueb Tswf Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2023, General Control : Siemens 840 DSL Main spindle Material passage : 65 mm max. speed : 5.000 rpm Spindle passage : 85 mm Spindle head : AD140 Drive power : 27 kW Torque : 145 Nm tool turret Tool holders : ISO-10889 Number of stations : 2 x 12 Number of driven tools : 2 x 12 Max. Speed : 6.000 rpm Travel Y : ±60 mm Dwjdpfxjrxc Eis Ab Tjf B-axis : 360 degrees Workpiece infeed and outfeed Type : Schnaithmann Designed for : 12 pallets Pallet size : 160mm x 200mm Total load of the system max. : 500 kg Equipment Chip management : Chip conveyor Coolant management : Eco-Fluid coolant system : switchable 8/80 bar Coolant tank : 750 l with paper belt filter

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck Dwsdpfxovitzns Ab Tof - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial