Used Ima Bima for sale (138)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Single-Sided Narrow Edge Bander IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with Servo Unit for Corner Copying MFA Year of Production: 2009 Condition: Very good Features: * Stable machine frame with mounted processing units * Electronically adjustable feed speed: 6–30 m/min (feed rate of processing units is not synchronized with full feed adjustment) * Feed chain guided in sliding rails with plastic pads and 80 mm wide rubber lining * Automatic lubrication of feed chain controlled by the machine program * Upper pressure roller: double V-belt, 70 mm wide, on ball-bearing rollers; electronically adjustable * CE-compliant machine safety * Noise-reducing and protective covers * Edge banding unit with drive enclosed in sealed oil bath and glue pot (1 main pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot system for fast replacement * Touchscreen display * End trimming saw unit for cutting excess edge at front and rear corners, including: pneumatic saw adjustment 0–25°, straight cuts, corner chamfering, automatic saw positioning for two edge thicknesses (e.g., 0.4 and 1.2 mm), and excess edge adjustment for corner copying * All processing units equipped with chip extraction * Novimat Contour series maintains high processing quality due to powerful corner copying unit and minimal spacing between workpieces (\~300 mm) Basic Technical Data: * Roll edge thickness: 0.3–3 mm * Paper, PVC, and ABS edges: 0.3–3.0 mm * Veneer: 0.5–3.0 mm * Wooden strips: 0.8–20 mm * Edge height: 14–65 mm * Maximum top edge overhang: * Up to 8 mm thickness: 5 mm * Over 8 mm thickness: 2 mm Workpiece Dimensions: * Minimum length (feed direction): 150 mm * Minimum width (for thickness ≤25 mm): 65 mm * Minimum thickness: 8 mm (without flat planer) / 12 mm (with flat planer) * Maximum thickness: * Without corner copying: 60 mm * With corner copying: 40 mm * Smallest workpiece: 150 × 150 mm or 65 × 300 mm (\*65 mm width for max thickness 25 mm) Machine Parameters: * Electronically controlled feed: 6–30 m/min (may be limited by individual units) * Workpiece protrusion beyond feed chain: * 38 mm (edge thickness 0.3–8 mm) * 30 mm (edge thickness 8.1–20 mm) Bsdpjw R S Slsfx Aafjlc Power Supply: * Voltage: 400/230 V, ±5/–10% with neutral * Frequency: 50 Hz * Control voltage: 230 V AC / 24 V * Compressed air: 8 bar * Extraction air speed: 28 m/s

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Blsdpfx Aerur Ureafoc Manufacturer: IMA Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Condition: used, Year of construction: 2004, Used 75 Litre IMA Model VORTEX 075 stainless steel mixer granulator. Total bowl capacity 75 litre, working capacity approx. 20 - 50 litre. Has jacketed bowl. Main impeller driven by 3,0 kW motor. Chopper blade driven by approximately 1.5 kW motor. Bowl cover is opened using with pneumatic cylinder . Also has top mounted stainless steel dust filter. Side discharge outlet with pneumatically operated valve. Includes local control panels and main switchboard. Blodpewm Atmofx Aafoc

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 08420, total length: 11,500 mm, edge thickness (max.): 3 mm, overall weight: 8,500 kg, compressed air connection: 7 bar, Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right. WORKPIECE & MATERIAL DIMENSIONS: Min. workpiece length : 150 mm Min. workpiece width : 65 mm Min. workpiece thickness : 8 mm Max. workpiece thickness : 40 mm (with corner rounding / copy function) Max. workpiece thickness : 60 mm (without corner rounding / copy function) Smallest workpiece : 150 x 150 mm, or 300 x 65 mm Workpiece overhang : 38 mm Edge thickness min/max : 0,3 – 3,0 mm Edge width min/max : 14 – 65 mm EQUIPMENT / SPECIFICATION BASIC MACHINE - Basic machine with 80 mm wide conveyor chain as workpiece transport device - Feed speed 6 to 30 m/min, adjustable from machine control - Top pressure with pressure-loaded guided rollers and 70 mm wide V-belt - Automatic height-adjustment of top pressure (thickness) - Workpiece support with rollers, extendable up to approx. 700 mm - Infeed table IMA 63.152, 500 x 500 mm, for easy feeding of long & narrow boards - Infeed device (manually) tiltable, with 5 driven rollers from top - Adjustable infeed guide/fence via NC axis Bjdpfx Aewyp Nueafolc AGGREGATES / EQUIPMENT - JOINTING TRIMMING/pre-milling (08.378), 2x4.5 kW, controlled (jumping), tool-Ø 125 mm Electronic horizontal positioning - GLUING AGGREGATE 04.1570 Concept, driven glue roller with automatic feed stop in case of error, Quick-lock system for glue application unit, Glue roller lift-off when feed stops Edge feed controlled by light barrier, upper edge guide w. step-motor, electronically controlled - Automatic PUR pre-melting system 283.203 - 6-fold automatic roll-change edging magazine POST-PROCESSING SECTION - End-trimming (snipping) unit 08.42, horizontal version, 2 motors each 0,65 kW, 200 Hz For straight and chamfer cutting, max. working speed 30 m/min - Fine trimming unit 08.055, 0,66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding 08.348, 2 motors 0,66 kW 400V 200 Hz, HSK 25 Max. working speed 20 m/min - Profile scraper 08.516, top/bottom, for multi-profile-knives, automatic positioning by step motors, max. 4 profiles, with electro pneumatic horizontal move-in/-out - Spraying devices for cleaning agent. - Flat scraper 08.521 (glue joint scraping), top/bottom - Profile (corner-) buffing 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS open compact • Flexible edge control • Uninterrupted power supply (UPS) • Power supply 400 V, 50/60 Hz, Control voltage 24 VDC / 230 VAC Machine dimensions (occupied area when installed) L 1150 x W 300 x H 260 cm Available: October 2025

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 Bljdpfxsvwf Sze Aafjc pressing cylinder pneumatic 4 table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Year of construction: 2001, condition: good (used), IMA glue part Spare part for e.g. IMA 680 / 480 /980 Edge banding unit for 4-sided gluing and all-round gluing on butt joints with: -Main pressure roller diameter 100 mm and pneum. controlled squeezing roller, diameter 35 mm -Specification of adhesive for the coating of the Edge material, with temperature control and level control -Servo drive for edge transport with auto- automatic adjustment to the web speed -Hot air re-activation unit 7.5 KW, on the adhesive side -IR radiator 600 watts on the decor side the deformation of the material at small radii -pneumatically driven cutting saw -Bumping edge query -NC axis Rotation range up to 740 degrees, pneum. Z stroke 125 mm -separate NC-axis in Y (with portal in X) working independently of the main axis Year of construction of the part 2001 comes from machine IMA 680 V No. 2216 Scope of delivery as shown Please check the possibility of installation in your machine. No return possible Unit was used in production for about 2 years and can be described as good Technical information subject to change Bsdsbxx Ikepfx Aafslc

Condition: good (used), IMA LED set-up aid Bodpfx Aebxx Iusafjlc used in working condition. about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA Bedpfxev N Nn Do Aafjlc The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Operating Methods: • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Edge Banding Machine Manufacturer: IMA Type: Quadromat 3512 U Year of 1999 Edge material: veneer rolls and strips, plastic, solid wood strips Edge height: 14-50 mm Edge thickness: 0.4-12 mm Speed: 18,000 rpm Cutting unit Milling units Profile scrapers Buffing unit Flat scrapers Bedov T R Eropfx Aafslc

Year of construction: 1991, operating hours: 13 h, condition: like new (used), functionality: fully functional, Corazza/IMA MD120 portion packer. Machine for dosing and wrapping mini portions of butter and bouillon cubes in rectangular packs. - Capacity 5400 p/hr up to 7200 p/hr - Current pack size 31x23x11 --> Conversion to other pack size possible - Yom. 1991. - Factory overhaul by IMA 2016. Only 13 running hours since the overhaul. - Paper feed and positioning controlled by photocell - Butter fed by stainless steel funnel with stainless steel auger. - Fully guarded with Lexan doors and windows. (Acc EC regulations.) - Including documentation and EC conformity declaration. - A fully automatic collecting and stacking device in multiple layer configuration can be added. Blodjwfn Adspfx Aafsc - This machine is basically the similar to the Benhil 8304 As new condition Please contact us for more information, the machine can be seen by appointment.

Condition: ready for operation (used), Year of construction: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Bodpfxjv Suhbo Aafolc

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Bledswa Tixopfx Aafoc

Condition: excellent (used), Year of construction: 2019, Almost perfect IMA AP400 labeling machine. Good condition lightly used. the AP400 is able to check and reject incorrect labels and can be monitored and controlled by HMI. Directly available for purchasing. Bsdpjv Up Eaofx Aafjlc