Used Ima Advantage 400 for sale (133)

Condition: used, Year of construction: 2017, operating hours: 3,123 h, functionality: fully functional, machine/vehicle number: 50614, For sale: used IMA Advantage 400 edge banding machine. This unit features milling aggregates and a profile scraper operated by servomotors, all controlled via computer. Additionally, 3 sets of cleaning fluids are included. The machine has recently undergone maintenance – the glue tank was refurbished, and the feed chain blocks as well as the conveyor belt were replaced. The machine is operational, in constant use, and 100% functional. Current machine hours: 3,123. It has processed 628,910 linear meters. Gusdpfjww Htlox Afieh Feel free to contact me for further information or to purchase.

Condition: used, machine/vehicle number: 005928, Type of edging: Thin edge, Thick edge Gujdpfx Afjwuz Ewsieh Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: reconditioned (used), Year of construction: 2014, Advantage 400 single-sided edge banding machine Equipment: - Working length 6700 mm -divider top and bottom - jointing unit 08.380 - Radiator 300 long, 2 x 1.5 kW for preheating the workpiece edge - gluing unit 283.1516 toothed belt drive - Strip control to prevent incorrect gluing. - Rotary capping unit for workpiece leading and trailing edges - Space reserve for lubricant spraying at high-gloss edge - Milling unit 08.0561 - Copy milling unit SKF-L - Profile scraper unit 08.519 - Spray nozzles at top and bottom for application of cleaning agents - Self-feeding scraper unit 08.521 - Buffing unit 08.617-2 - Interior lighting - Electronic height adjustment of top pressure (one-sided) Technical data "workpiece - Workpiece length min.: 150 mm - Workpiece width min.: 65*/ 150 mm (*with max. workpiece thickness of 25 mm) - Workpiece thickness min.: 8 / 12* mm (*with profile scraper) - max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross section) - workpiece shape: rectangular Godpfxjitu Eaj Afisuh - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, foil, veneer - Laterally protruding coating material: 0 mm Technical data "Edge material Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*foil only with additional equipment) - veneer edges: 0.5 - 3.0 mm Edge cross-section for veneer max.: 150 mm² Edge cross-section for plastic edge max.: 180 mm² Cut-to-length edge strips: strips 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Edge height min.: 12 mm Edge height max.: 65 mm Upper edge protrusion max.: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (chamfer 15°) - Plastic edge up to 3.0 mm (radius depending on tool) - strip up to 12 mm (flush milling) Technical data "machine working length 6700 mm Feed speed 20 m/min for Advantage 400 Constant workpiece protrusion from the chain track: 35 mm + Edge thickness max. cross section: 520 mm² Throughfeed width min. (with 35 mm projection): 65 mm Workpiece length in feed direction min.: 150 mm basic height (upper edge of chain track): 900 mm Unit side: In feed direction left Control voltage: 24 V DC / 230 V AC Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (FI protection circuit not applicable) Machine control ICOS Expert Features: - PC-based control system with integrated PLC and electronic draw frame control - Simple, machining-related program creation - Navigation and operation via touch screen - Program memory for max. 1000 programs - Program number 3-digit numeric - Control system prepared for service portal Technical data control system:* - Panel PC with integrated 15" TFT display, with touch screen - USB connection - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 in the switchboard - Operating system: Windows with TwinCat system for real-time control Note: The technical data and descriptions are a copy of the order confirmation at that time. Data are for information only and are not binding. Condition: - Machine completely overhauled - upper pressure belt new - Feed chain new - Feeler wheels and tools of finishing new

Condition: used, machine/vehicle number: 008153, X axis working area: 3800 mm Y axis working area: 1560 mm Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 29 Gedew Tiwkopfx Afijuh Total number of tool changer positions: 18

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) Godpow A Ruqofx Afieuh No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Gedpfx Ashu U Nxofiouh Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Condition: excellent (used), Year of construction: 2008, operating hours: 22,000 h, functionality: fully functional, feed length X-axis: 8,000 mm, feed rate X-axis: 20 m/min, total length: 8,600 mm, workpiece height (max.): 60 mm, total width: 1,700 mm, edge thickness (max.): 3 mm, total height: 1,850 mm, overall weight: 4,400 kg, compressed air connection: 7 bar, height adjustment type: electric, input voltage: 400 V, input current: 54 A, product height (max.): 60 mm, pressure: 7 bar, IMA ICOSTS control, touch panel, edge band magazine, 2x spraying devices, pre-milling unit, preheating zone, crosscut saw, straight and radius milling units, corner rounding unit, scraper unit, smoothing unit, polishing unit. Industrial machine in very good technical condition, kept in constant operational readiness. Operated in a single-shift system. The device has been used exclusively as a support unit during periods of increased order volume. A video of the machine in operation and additional photos can be provided to interested parties. Gjdpfx Afsxctwrjijuh

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, Additional Equipment Jointing cutter Radiant heater EVA gluing unit Roll magazine for edge material Cutting unit Flush milling top/bottom MFA with 2 motors for radius r2, servo-controlled Profile scraper unit Surface scraper unit Buffing unit This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Guedpfew Uagrjx Afijh Application Types Edge Banding

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Manufacturer: IMA Guedpfx Aerur Urjfioh Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Condition: refurbished (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3,0 - 12,0 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Feeding speed (fixed) m/min 16 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x kW 3,0) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue) 283.1513 Gusdpfx Aedfgfpsfioh Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Fine Trimming unit 08.055 (2 x kW 1) - 30° Multi Function Unit (Profile contour Trimming unit) 08.346 (2 x kW 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 (2 x kW 0,25) Free space

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Guedpfewtiu Djx Afish Application Types Edge Banding

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Gedpfx Afsflc Uhsisuh Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Gjdpfx Asd Nuu Hefijuh Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Gedpjd Nt N Hefx Afisuh Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), Year of construction: 2019, Almost perfect IMA AP400 labeling machine. Good condition lightly used. the AP400 is able to check and reject incorrect labels and can be monitored and controlled by HMI. Directly available for purchasing. Gusdpfxov Up Eas Afioh

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Gjdoxf Ewvjpfx Afieuh Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors Gujdpswkba Tjfx Afijh With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11000-0180, Homag Optimat KFL525/8/A3/15 Double Sided Edge Bander Godpfx Afoxnc D Seijuh

Condition: used, machine/vehicle number: 007485, Position 1: Angular Beam Panel Saws IMA-COMBIMA SYSTEM + AH6 Position 2: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 3: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 4: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Position 5: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 7: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 9: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Position 10: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Guodowuz Aispfx Afish Position 11: Roller Conveyors IMA-COMBIMA SYSTEM + AH6

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 6200 kg Gsdpfjxmbycex Afijuh Main Drive Spindle speed range 8000–24000 Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Z-Axis Movement 100 mm This 3-axis IMA BIMA 210 120/300 was manufactured in 2006. It features a large axis travel (X = 3000 mm, Y = 1200 mm, Z = 100 mm), accommodating workpieces up to 2800 mm in length and 1200 mm in width. The main spindle delivers power of 7.5 kW with speeds ranging from 8,000 to 24,000 rpm. It weighs approximately 6200 kg and includes IMA IMATRONIC CNC control. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 1994, power: 4 kW (5.44 HP), Empty weight: 1.400 kg Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer’s data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats – A mini : 20mm – A maxi : 85mm – B mini : 12mm – B maxi : 60mm – C mini : 50mm – C maxi : 170mm Carton dispenser: suction cup picking Product feed belt: cell chain Gujdpfx Afoxguw Ueioh Leaflet insertion Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Guedpsxggzlsfx Afioh Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Gsdpeqy Em Njfx Afijuh Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Gjdpfx Afowuuf Doieuh Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Condition: used, machine/vehicle number: 007726, Position 1: bordatriceLottoUno IMA-COMBIMA SYSTEM/I/R75/1840 Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM/I/R75/1840 Guodowuug Iepfx Afieh