Used Rima for sale (135)

Condition: good (used), Year of construction: 2016, Year 2016 Description Product Length: Minimum: 180 mm (7.09") Maximum: 500 mm (19.70") Product Width: Minimum: 145 mm (5.71") Maximum: 320 mm (12.60") Compressed Log Length: Minimum: 700 mm (27.56") Maximum: 1,200 mm (47.24") Maximum Log Weight: 170 kg (375 lbs) Cycle Time: 17 seconds (product dependent) Palletizing Height: Bottom edge of log: 100 mm (3.93") Top edge of log: 1,500 mm (59.06") Pick-Up Height: 900 mm (35.43") Electrical Supply: 400 V 3 Phase (3~) N + PE 50/60 Hz Installed Power: 1.6 kW Isdpfx Abjzqrdtenstk Compressed Air Requirement: 65 l/min at 6 bar (87 psi) Maximum of 4 cycles per minute Hose connection: Ø 13 mm Machine Weight: 1,300 kg (2,870 lbs)

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed -infeed belt -reject unit -pressing station -turnoverbelt -delivery to right Ijdpezh Ev Rofx Abnetk

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description Itsdpfx Ajzhnaxebnsk -straight infeed -infeed belt -reject unit -pressing station -turnoverbelt -delivery to right

Condition: good (used), Year of construction: 2016, Built in: 2016 Length: 1,600 mm Width: 1,000mm Height: 2,200 mm Ijdou R Rynspfx Abnjtk

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Itodpjzuyg Rjfx Abnok Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Ijdeu R I Euopfx Abnotk Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge Ijdpoqpgmcsfx Abnstk - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Condition: good (used), Year of construction: 2003, Year of construction 2003 Size: max. 320 x 320 mm min. 133 x 152 mm Pile height: Max. 330 mm Speed: max: Iedpfxeu R Ulbs Abnstk max. 100,000 ex./h

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Iedpfxszr Hylj Abnjtk Control cabinet: Fully wired Cable length: 5 m EQUIPMENT Control cabinet including 5 m cable Automatic star-delta starter

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives Itsdpfx Abeh Itu Esnok - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Iodpfxsh Ir E Ee Abnetk Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Year of construction: 1980, condition: used, Shearing jaws. Itsdozr Iphjpfx Abnok

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Isdpfjd N D Npex Abnotk

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 48390-115-3078, We are offering this ready-to-use Metso M&J 4000 M pre-crusher, manufactured in 2012. Itodpjzm Eiuofx Abnok Manufacturer: Metso Model: M&J 4000 M Serial number: 48390-116-3078 Year of manufacture: 2012 EC type approval: e1*97/68HA*2004/26*0346*00 Machine no.: 14 of 50 Engine ID: 942.992-C-0837-242 If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2016, Offer for KP-500 Optim KP 500 Optim, year of manufacture 2016 - Infeed table length: 5.2 m - Main motor: 5.5 kW - Outfeed table length: 6.0 m, can be shortened if necessary Iodpfxey U E Hxj Abnjtk Still in production, very little used (virtually unused). For more information, see the link.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Itodpfx Abozulxfsnok Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm Itsdpfjdyky Tjx Abnsk max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Isdpfxsy Dtyrj Abnstk

Condition: like new (used), functionality: fully functional, tank capacity: 120 l, Equipment: CE marking, Autoclave – Kettle type Korimat KA 160 / 2.5, including 2 x insert basket 1/3. Iedpfx Abszpd Ihonjtk Power 9 kW, voltage 3 x 400 V / 50 Hz. Machine completely made of stainless steel. Condition – Like new!!!

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Max. format: 320 x 480 mm Iodpfx Abjy Siprenotk

Condition: used, Year of construction: 2003, functionality: fully functional, roll diameter: 578 mm, Special Offer: GRIMA-36 Coldset Web Offset Press — Complete Press or Spare Parts For sale: GRIMA-36 coldset web offset press, available in Greece. The machine is offered as a special clearance opportunity and may be sold either as a complete press or for spare parts, selected components, dismantling, or export. We are open to reasonable offers, especially from buyers who can arrange quick dismantling and removal at their own expense. Machine / Equipment Brand / Manufacturer: GRIMA Model: GRIMA-36 Type: Coldset web offset press / newspaper press Application: Newspaper printing, inserts, commercial web offset work Configuration: 4Hi tower Cut-off: 578 mm Location: Greece Availability: Immediately available / available upon agreement Possible Use The machine may be suitable for: - Complete web offset press installation - Spare parts for existing GRIMA / Indian web offset presses - Printing units / towers - Mechanical components - Rollers / cylinders - Inking and dampening parts - Gears, motors, and electrical components - Dismantling and export Condition Itodpezk Evpofx Abnjk The press is offered as is. Inspection is possible by appointment. Further technical details, photos, and videos are available upon request. Sale Terms Sold as is, ex works Greece. Dismantling, loading, and transport to be arranged by the buyer. The machine is available for immediate sale, and a special price may be considered for quick removal. Price Price on request — reasonable offers invited. Special price available for quick removal.

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm Itjdpfxsc Idi Rs Abnok min 860 mm Speed max 900 Pack./h

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Itodjc Rntnopfx Abnjk Pile height 235 mm Pile height pre-loading cage 124 mm

Condition: used, functionality: fully functional, total width: 1,800 mm, total length: 3,420 mm, total height: 1,350 mm, number of blades: 9, overall weight: 10,000 kg, M&J 2000SHDC Shredder (used machine) – robust single-shaft pre-shredder for wood, bulky waste, and commercial waste. Reliable and powerful for continuous operation. Price: €65,000 Iodezdp Dqspfx Abnotk Location: Merano (South Tyrol) - Italy

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting height (max.): 50 mm, cutting width (max.): 3,300 mm, saw blade diameter: 300 mm, Equipment: documentation/manual, type plate available, For sale: SIGMA PRIMA 50 panel saw (2016) with label printer – precision, power, and reliability in one! We offer a professional Sigma Prima 50 panel saw from 2016 – an ideal solution for carpentry workshops, furniture factories, and companies involved in the production of wood-based panel components. Why choose it? Itedpfozqc E Iex Abnjk 1. Highest level of cutting precision – a stable structure and high-quality guides guarantee perfectly straight and repeatable cuts. 2. Powerful and efficient motor – easily handles MDF, particleboard, laminate, or solid wood. 3. Large panel table – comfortable processing even of large-format panels. 4. Scoring saw – perfect edge finishing without chipping. 5. Year of manufacture 2016 – modern design, proven and ready for work. 6. Connected label printer, ensuring that each component is accurately labeled, preventing errors during assembly. Ideal for: 1. Production of custom-made furniture 2. Serial processing of panels 3. Companies producing prefabricated houses 4. Precision carpentry work 5. Businesses that value quality and efficiency The machine is in good working order, robust, durable, and designed for intensive use. It is an investment that will quickly pay for itself thanks to increased efficiency and accuracy. Contact us for more information, photos, or to arrange a viewing. Don't miss this opportunity – a professional panel saw in very good condition is a guarantee of quality for years to come! We purchased a new model, so this one is being sold. Price: 96,500 PLN net Tel. 666-609-957