Used Vacuum Lifters for sale (4,207)

Condition: ready for operation (used), functionality: fully functional, Auction of a Joulin vacuum lifter with stacking function and infeed! The vacuum lifter is only 1.5 - 2 years old! The machine can be used as a standalone unit or as part of a complete line: - Bandsaw Canali ML 1100 TWIN F.L. 30 H.S. (Search ID: 21264817) - Wide planing machine Costa Planing Machine (Search ID: 21264937) TECHNICAL DETAILS Load capacity per layer: 300 kg MACHINE DETAILS Vacuum suction length: 6,000 mm Vacuum suction width: 1,400 mm Rsdpfxsyk Tifo Ahvep

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, Schmalz vacuum lifter for heavy panels with new suction rubber Load capacity 150kg horizontal and vertical Suction pad is motor-driven and swivels 90 degrees Suction box 1000 x 675mm Acoustic warning signal in case of low vacuum 400V, 1.5kW Can be attached to an on-site chain hoist CE marking No inspection book available Redov S Synopfx Ahvsp Suction rubber renewed Like-new condition The machine can be demonstrated at our facility by appointment. We only offer machines that are in stock and ready for demonstration – see "more offers from this supplier".

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Rsdpfx Aedzqc Ishvop Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Redswutibepfx Ahvjp Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: new, Year of construction: 2026, workpiece weight (max.): 250 kg, load capacity: 350 kg, Vacuum Lifter STEEL SYSTEM UP300 (suitable for sheet metal – for use with a plasma cutting machine) This device enables the removal of small parts from the work table, even in areas where a magnet cannot be used. Equipped with a rechargeable battery and a battery level indicator. Compatible with all lifting machinery. • DIMENSIONS: - Height: 307 mm - Width: 215 mm - Depth: 247 mm • Device weight: 12.5 kg • Lifting capacity: 250 kg • 1 DS. SYSTEM suction pad ∅250 with replaceable sealing gasket • Integrated inspection manometer Redpfx Aexqaw Uehvop • Power supply: external battery (1 included – DeWalt, Milwaukee, Makita compatible) • Features an ergonomic, non-slip handle • Material dimensions: Minimum working area dimensions: 30x30 cm Material dimensions: 1×1 m See our other listings for additional equipment. We offer different machine configurations – contact us with your requirements and we will tailor the machine to your needs!

Condition: new, Year of construction: 2023, New ManutLM manipulator available due to order cancellation – see description. New price: €27,000.00 excl. VAT; OFFER: €15,000.00. Never installed, still in crate. Rodpfx Ahoylv Rbovep

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: DS550, VACUUM LIFTER PANEL SYSTEM DS550 ROTO Vacuum device for installation of all types of roof and horizontal wall sandwich panels at various inclination angles, additionally equipped with 180° panel rotation. The most versatile model in the PANEL SYSTEM product range. Available with radio control, and with single or dual vacuum circuits. Can be suspended from any type of crane, HDS, or forklift. Lifting capacity: 400 kg Control: Radio remote Power supply: Battery (up to 8 hours of operation) Battery charge indicator: Yes Mounting position: Horizontal Number of suction cups: 8 Number of arms: 4 Material dimensions: 1-16 m Dual circuit system capability: Yes (optional, extra charge) Device weight: 200 kg Rjdpfxswuryfs Ahvep

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to commercial buyers and without any warranty. Rodpfx Ahsxxv Eqsvep

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Auction of a nearly new exhibition machine! TECHNICAL DETAILS Rodpoygxabsfx Ahvjp Load capacity: 3.0 t Number of suction pads: 8

Year of construction: 2017, condition: ready for operation (used), Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts. Rsdpel I Ewfofx Ahvjp

Condition: used, Vacuum lifting device, vacuum lifter RIVATEC UNIGRIPPER Redswywipspfx Ahvsp Custom-made as a handling device for an industrial robot Year of manufacture: approx. 2008 Load capacity: approx. 50 kg - 7 suction pads Ø 32 mm (design allows for 12) - 16 suction pads Ø 42 mm (design allows for 20) - 5 suction pads Ø 60 mm (design allows for 6) - a few suction cups missing, see photos (bellows suction pads) - swiveling base body for suction surface at 90° angle or flat 180° - base body pneumatically swiveling - Very elaborate and precise construction with linear guides - Flange plate for suspension or attachment to the robot - Equipped with many Festo components Required space (L x W x H): 620 x 300 x 300 mm Net weight: 28 kg Good condition 2 units available, price indicated per unit

Condition: good (used), Year of construction: 2008, Vacuum lifter Rodpfx Aoqxat Hohvjp VacuMaster Type:VM-ECO-500-H-1 Year 2008 in good condition .

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Vacuum lifter with extention arms max. capacity : 320 Kg rotable 360 ° with detents at 90 ° intervals tiltable 90 ° with vertical detznt per pad capacity : 80 kg Rsdpfx Ahsyhc Hnjvsp Unit weight : 61 Kg power sytem : 12 V DC 7 A-HR , 10 Amp

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. Rodpfxsnlb Rwo Ahvep * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. Rodpfx Asnlb Rzehvep - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) Redpfx Aheq Sc Aujvep - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm Rjdpfx Ajxak Ddshvop - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Year of construction: 2009, condition: good (used), Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control Redpfotpyquox Ahvop -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 675 kg, lifting height: 3,800 mm, lifting power: 350 kg/m, Equipment: CE marking, === MAIN SPECIFICATIONS === Model: Smartgroup SG350 Year: 2025 (Demo machine) Rodpfoxwm Ruox Ahvjp Operating condition: Demo / as-new Lifting capacity: 350 kg Maximum lifting height: 3,800 mm Own weight: 675 kg Traction: 1WD rear-wheel drive Speed: 5 km/h Dimensions (L × W × H): 1.80 × 0.75 × 1.85 m Batteries: 4 × 105 Ah AGM Charger: Integrated onboard charger Overload warning system: Yes Proportional controls: Yes Pick & Carry capability: 350 kg Turning radius (lateral): 2.1 m CE certification: Yes === HIGHLIGHTS === • Demo machine from 2025 – excellent condition • Compact, lightweight and highly manoeuvrable (only 675 kg) • Strong pick & carry performance with 350 kg capacity • AGM battery pack with integrated charger – plug & play operation • Proportional control system for smooth and precise movements • Overload warning system for improved safety • Ideal for glazing, construction, installation, warehouse and industrial use • CE-certified and ready for immediate operation === CONDITION === Demo condition – used only for demonstrations. Fully inspected and tested by certified technicians. No damage, no faults, 100% functional. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price: €22,250 excl. VAT (EXW Sittard). === DELIVERY === • Crane loading available on request • Worldwide transport arranged by Collé Rental & Sales • All shipments handled professionally with full CE documentation

Year of construction: 2025, condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Rsdpfxjc Umfte Ahvjp Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism Rodpfx Aou R Szashvjp - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: new, functionality: fully functional, Year of construction: 2026, Vacuum Lifter/Suction Cup PANEL SYSTEM DS550 MINI Vacuum device for installing all types of wall and roof sandwich panels at various inclinations. The unit can be upgraded with additional accessories to increase its range of operation. FREE WITH DEVICE! - FULL RADIO REMOTE CONTROL UP TO 200m. Rjdpfoxpha Usx Ahvep Device features: • Compatible with all types of cranes and truck-mounted cranes (HDS) • Tool-free adjustment and configuration of suction cups • Power supply: 12V or 24V battery (up to 12 hours of operation) • Max lifting capacity: 350 kg • Suction cups: 500mm x 100mm with REPLACEABLE FOAM The device can lift: • Horizontal wall panels up to 8 m long, vertical panels up to 8 m long • Roof panels at different roof angles up to 8 m long • Other panels, e.g. sinusoidal profile • Skylights Safety systems: • Acoustic and visual alarms for vacuum pump operation • Side safety straps • Vacuum tank with safety valve Basic machine configuration includes: • 2 arms, each 1.25 m long • 2 cross-arms with adjustable mounting for suction cups • 4 suction cups • Control unit with charger • 2 safety straps Included in the price: • Operation manual, warranty card (12 MONTHS) CONTACT US FOR DETAILED OFFER * Option to purchase a central suction cup as additional equipment CHECK OUR OTHER LISTINGS! *The stated dimensions refer to panels with double trapezoidal profile and a minimum thickness of 10 cm Feel free to contact us DS SYSTEM

Condition: new, functionality: fully functional, empty load weight: 130 kg, lifting power: 1,000 kg/m, Year of construction: 2026, machine/vehicle number: 550, Vacuum Lifter Panel System DS 550 MAX - Radio Remote Control Configuration can be customized to individual requirements SPECIFICATION: • 6 arms, each 1 m long • 6 cross arms with adjustable suction cup mounting • 12 side suction cups • Wall adapter • Control unit with charging function • Control unit with radio remote control • Radio remote control handset • 2 safety belts Rsdpfx Ahjxnanzovep • Maximum lifting capacity: 1000 kg FEATURES: • Compatible with all cranes and HDS systems • Suitable for various working conditions • Suction cups can be configured independently without tools • Power supply: 12V battery (up to 12 h of operation) • Battery charge indicator • Vacuum gauge • Vacuum reservoir • Max lifting capacity 1000 kg • Device weight approx. 130 kg • Suction cups 500mm x 100mm with REPLACEABLE SEAL

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Rjdpfx Aowzafpohvop Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: new, functionality: fully functional, gearing type: other, fuel type: electric, color: other, overall weight: 110 kg, operation weight: 600 kg, maximum load weight: 600 kg, lifting power: 600 kg/m, Year of construction: 2025, machine/vehicle number: 550, Panel System DS550 Vacuum Lifter -Vacuum device for installing all types of wall and roof sandwich panels at various inclination angles. -The most versatile model in the PANEL SYSTEM product line. Detailed specifications: -Lifting capacity: 600 kg -Control: Radio (remote control included) -Power supply: Battery (up to 12 hours of operation) -Battery status indicator: Yes -Mounting position: Vertical/Horizontal -Vertical wall mounting: Yes -Number of suction cups: 8 -Number of arms: 4 -Material length range: 1-16 m -Dual-circuit system option: Yes (for an additional charge) -Device weight: 100 kg Rsdpowt Afvofx Ahvsp Device configuration can be modified (lifting capacity, control type, additional equipment). The price refers to the PANEL SYSTEM DS 550 unit with 8 suction cups and radio control.