Used Hydraulic Vice for sale (15,478)

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW Dkodpfeyfwvljx Aiwjl dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min Dedsy I Dbbspfx Aiwjkl back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: used, Year of construction: 1989, sheet width 3190 mm plate thickness 6 mm distance between columns 3250 mm cutting angle 1,2 ° no. of strokes 32-75 Hub/min column arm 100 mm back stop - adjustable 5-1000 mm table height 800 mm oil volume 150 l total power requirement 15 kW Dedpjy I Dawjfx Aiwekl weight of the machine ca. 6200 kg Equipment: - electro-hydraulic guillotine shear type “swing cut” - RAS “MULTICUT-ECO 2000” CNC control unit * movable, from the front * 3 axes control unit with up to 900 program lines * Sheet holding device for thin sheet cutting can be switched on * Including piece and cycle counter * Operating modes selectable - CNC electro-motorized back gauge ... Travel range 5-1000 mm * Traversing speed ... 180 mm/sec. - Front support plates with ball rollers - central motorized cutting gap quick adjustment - 1x RAS extra long side stop - 2x RAS extra long support arms - 1x free-moving foot switch - 1x RAS pneumatic sheet holding device for thin sheet cutting - 1x RAS movable scrap diverter - 1x RAS extra blade set for guillotine shears

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. Dksdpex Ry Ntefx Aiwjl +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: Dksdpfxoyw Ua Te Aiwjl - Pallet shipping - Local pick-up possible

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Djdpfeudph Ijx Aiwskl

Condition: excellent (used), Sell Hurst hydraulic rescue tool kit - Hydraulic shears. Dsdpfjvgnudox Aiwokl - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a Lukas baler in very good condition. Dkedpfx Aijum Htzewol

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Dodpoy Rf T Refx Aiwokl Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: excellent (used), mileage: 1,059,976 km, power: 340 kW (462.27 HP), first registration: 06/2017, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking air conditioner, parking heater, = Further Options and Accessories = - (Roof) Spoiler - Aluminum fuel tank - Bed - Air horn - Radio/CD player - Side stripe - Side mirrors with electric adjustment - Transmitter devices - Sun visor - Digital tachograph = Further Information = General Information Cab: one-and-a-half Registration number: 20-BJL-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Empty weight: 8,082 kg Axle Configuration Brakes: disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8,000 kg; Tire tread left: 40%; Tire tread right: 40%; Suspension: leaf suspension Rear axle: Tire size: 315/70 R22.5; Max. axle load: 11,500 kg; Tire tread left: 40%; Tire tread right: 40%; Suspension: air suspension Maintenance Dsdpfoym Uftex Aiwokl APK (General Technical Inspection): valid until 06/2026 Condition Technical condition: very good Visual condition: very good Damage: none

Condition: good (used), mileage: 883,100 km, power: 368 kW (500.34 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2017, Equipment: AdBlue, central locking, cruise control, fog lights, fridge, onboard computer, parking heater, retarder, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - High beam headlights - Windscreen - Cabin - Tipping hydraulics - Air suspension - Particulate filter - Sleeper cab - Parking heater - Xenon lighting - PTO (Power Take-Off) = Notes = Scania S500 NGS Highline 6x2 – PTO/Hydraulics – Retarder – Custom interior – Full air suspension Model Year: 8-11-2017 Mileage: 883,100 km VIN: YS2S6X20002137984 PTO/Hydraulics Retarder Full air suspension Custom interior = Further Information = Dkjdpfx Aoyxgmusiwol Technical Details Number of cylinders: 6 Transmission Transmission: Opti Cruise, 12-speed, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max axle load: 9,000 kg; Steering axle; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Max axle load: 11,500 kg; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Lift axle; Max axle load: 7,500 kg; Inner left tread: 40%; Outer left tread: 40%; Inner right tread: 40%; Outer right tread: 40% Weights Unladen weight: 10,560 kg Payload: 17,440 kg Gross vehicle weight: 28,000 kg Condition Technical condition: good Optical condition: good

Condition: used, mileage: 741,546 km, power: 316 kW (429.64 HP), first registration: 11/2004, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 6x2, fuel: diesel, driver cabin: sleeper cab, emission class: euro3, suspension: other, total length: 6,100 mm, total width: 2,500 mm, total height: 3,650 mm, Year of construction: 2004, Equipment: cruise control, fog lights, = Additional options and accessories = - Aluminium fuel tank - Tipping hydraulics - PTO (power take-off) = Further information = Tyre size: 315/70 R22.5 Front axle: Steered; Suspension: Parabolic suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Twin tyres; Suspension: Air suspension Dkjdoy Ra Hlopfx Aiwol Unladen weight: 10,860 kg Payload: 15,140 kg Gross vehicle weight: 26,000 kg Reference number: 23

Year of construction: 2014, condition: ready for operation (used), A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible. Dkedpfx Aoy N Uwvoiwel

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. Dkedpfx Ajyw Ah Eeiwjl In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Dedpfxey N Tmij Aiwokl

Condition: excellent (used), Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Dedpfx Aiey N Tl Eowokl Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2008, Year of manufacture: 2008 Maximum reach: 1.300 cm Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Dkodpfx Aey N Tlxoiwjl No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 1993, Immediately available ex location: Hydraulic Guillotine Shear Steiner Type HTS 30 113 Year of manufacture: 1993 CNC-controlled digital backgauge 1000 mm Light barriers Cutting length 3200 mm Dedpfx Aiey N S T Ijwjkl Material thickness up to 13 mm Throat depth 300 mm Stroke 300 mm Drive power 15 kW Weight 15 t Price: EUR 6,500 plus VAT, ex location

Year of construction: 2025, condition: new, functionality: fully functional, High Tonnage Lock Nut Cylinders • 12 × HCL4006 • 4 × HCL2006 Heavy-duty lock nut cylinders, suitable for long-duration load holding and high-tonnage lifting operations. Split Flow Pumps Dksdpfx Aisy N Rm Hswol • 2 × SFP613W Enerpac Split Flow pumps, designed for synchronized operation of multiple cylinders. Ideal for applications requiring equalized lifting or controlled multi-point movement. High Pressure Hydraulic Hoses • 12 × Enerpac Hose 199510722 – 30 meters each Industrial 10,000 psi (700 bar) thermoplastic hoses, suitable for long-distance hydraulic setups. Hydraulic Couplers • 30 × Enerpac CH604 (Male Coupler, 3/8" NPTF, 10,000 psi) • 24 × Enerpac CH604 (Additional units) Total: 54 couplers Standard Enerpac high-pressure quick connect fittings.

Condition: ready for operation (used), functionality: fully functional, plate length 121cm plate width in widest place 112cm span between plates 30cm Dedpfxsy N Rgys Aiwjkl pump motor power 1,5kW piston diameter 156mm dimensions: length 183cm width 95cm height 188cm

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. Dkodpfx Aiory Trpswol L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: MAE Hydraulic Straightening Press Type HY – S 100 RH Year of manufacture: 1980 Inspected according to UVV Stroke: 500 mm Pressing force: 100 tons Table: 4000 x 500 mm Complete with straightening unit Weight: 5,700 kg Dkjdpfxoy N Ng Sj Aiwel Price: EUR 4,500.— plus VAT, ex location Hamburg

Condition: excellent (used), mileage: 637,466 km, power: 375 kW (509.86 HP), first registration: 01/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power assisted steering, retarder, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Leaf suspension - Roof spoiler - High beam - Low noise - Speed limiter - Tipping hydraulics - Air conditioning - Alloy wheels - Air suspension - Air horn - Particulate filter - Radio/CD player - Radio/cassette player - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Body-colored bumpers - Engine pre-heater - Xenon lighting - PTO (Power Take-Off) = Notes = IVECO S-WAY 510 | Hydraulics | Retarder | 637,466 km | 2021 | 2 tanks | Smart Tachograph 2 | Alcoas | Full spoiler package | Stand air conditioning | Navigation system | 2 refrigerators | 2 beds | Heated/cooled seats | Air conditioning | ACC | Cruise control | Automatic transmission | Euro 6-D | 4X2 | Belgian truck Chassis Number: WJMM62AVZ0C440624 EXPORT Road transport: Austrian transit license plate with insurance for 21 days + €550 Sea transport: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about the truck: Truck video (YouTube): More about Geerts Trucks & Trailers: Dkodpfx Aijylbk Howjl YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from incorrect information in this advertisement. Geerts Trucks & Trailers strives to provide accurate information at all times. = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 12,882 cc Axle configuration Axle make: BRIDGESTONE Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Alloy wheels; Max. axle load: 8,000 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: leaf springs Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 13,000 kg; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Reduction: single; Suspension: air suspension Weights Unladen weight: 8,553 kg Payload: 10,447 kg Gross vehicle weight: 19,000 kg Condition Technical condition: very good Visual condition: very good Additional Information Contact Olivier Geerts or Edwin Geerts for more information.

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm 2330 mm 3400 mm Dodpsyackwofx Aiwokl 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: excellent (used), Product description: Roemheld Hilma EL 160 CNC machine vice, precision clamp 4 identical units available. Price per unit. ----- Condition of the item: The vice comes from a company liquidation. Good used condition. Internal reference: R2 Dsdpjy N Ez Sofx Aiwjkl